MSACMT460A Facilitate the use of planning software systems in manufacturing

Supersededtraining.gov.au: supersededNonEquivalent

The currency period for MSACMT460A ended on 30 April 2012 — 14 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 2 May 2013. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

For an ASQA-registered RTO that does not already hold it, adding the replacement to scope is a change-of-scope application to ASQA, with a fee set by law: A$200 application fee + A$1,100 assessment fee per application (up to 5 VET courses and 50 units of competency). RTOs registered by a state regulator, and ASQA delegates, sit under other arrangements. Source: NVR Fees Determination 2026, F2026L00814, from 1 July 2026 · read 5 September 2026.

Product type
Unit of competency
Training package
MSA07 — Manufacturing Training Package
Currency period ends
30 April 2012
Latest release
Release 1 · 1 December 2005
Supersedes
nothing — no earlier product listed
Superseded by
MSS404060A not equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. MSACMT460ASuperseded — not equivalentFacilitate the use of planning software systems in manufacturing
  2. not equivalent
  3. MSS404060ASuperseded — equivalentFacilitate the use of planning software systems in a work area or team
  4. equivalent
  5. MSS404060Superseded — equivalentFacilitate the use of planning software systems in a work area or team
  6. equivalent
  7. MSS404062CurrentFacilitate the use of planning software systems in a work area or team

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

Official documents on the register

What training.gov.au lists for MSACMT460A and for its training package MSA07 (release 8.4), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

Is MSACMT460A on your scope?

This page is the register's record of one product. What it cannot tell you is whether MSACMT460A sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

Where MSACMT460A is used

training.gov.au lists MSACMT460A inside 57 training products, 1 of them current. Every one of them is below, with the register's own core or elective flag for MSACMT460A in that product.

Current products 1 listed

CodeTraining productTypeMSACMT460A is
MSA50108Diploma of Manufacturing TechnologyQualificationelective

Products no longer current 56 listed

The register still records MSACMT460A inside these, but it no longer recommends them as current. They are here because a scope history or an old enrolment can still point at them.

CodeTraining productTypeMSACMT460A is
AUM40112Certificate IV in Automotive ManufacturingQualificationelective
AUM45108Certificate IV in Automotive Manufacturing (Bus/Truck/Trailer)Qualificationelective
DEF32312Certificate III in Explosive Ordnance ManufactureQualificationelective
DEF41912Certificate IV in Explosive Ordnance ManufactureQualificationelective
FDF30110Certificate III in Food ProcessingQualificationelective
FDF30111Certificate III in Food ProcessingQualificationelective
FDF30210Certificate III in Pharmaceutical ManufacturingQualificationelective
FDF30310Certificate III in Plant BakingQualificationelective
FDF30910Certificate III in Food Processing (Sales)Qualificationelective
FDF40110Certificate IV in Food ProcessingQualificationelective
Show the remaining 46 products no longer current
CodeTraining productTypeMSACMT460A is
FDF40210Certificate IV in Pharmaceutical ManufacturingQualificationelective
FPI30305Certificate III in Sawmilling and ProcessingQualificationelective
FPI30311Certificate III in Sawmilling and ProcessingQualificationelective
FPI30405Certificate III in Wood Panel ProductsQualificationelective
FPI30411Certificate III in Wood Panel ProductsQualificationelective
FPI30505Certificate III in Timber Manufactured ProductsQualificationelective
FPI30511Certificate III in Timber Manufactured ProductsQualificationelective
FPI40310Certificate IV in Timber Truss and Frame ManufactureQualificationelective
FPI40311Certificate IV in Timber Truss and Frame ManufactureQualificationelective
FPI40410Certificate IV in Timber Truss and Frame DesignQualificationelective
FPI40411Certificate IV in Timber Truss and Frame DesignQualificationelective
LMT30107Certificate III in Textile ProductionQualificationelective
LMT30307Certificate III in Cotton GinningQualificationelective
LMT30407Certificate III in Textile FabricationQualificationelective
LMT30507Certificate III in Clothing ProductionQualificationelective
LMT30707Certificate III in Footwear ProductionQualificationelective
LMT30807Certificate III in Footwear RepairQualificationelective
LMT30907Certificate III in Leather ProductionQualificationelective
LMT31110Certificate III in Laundry OperationsQualificationelective
LMT31210Certificate III in Dry Cleaning OperationsQualificationelective
LMT31807Certificate III in Technical Textiles and Non-wovensQualificationelective
LMT40107Certificate IV in Textile Technology and ProductionQualificationelective
LMT40207Certificate IV in Cotton GinningQualificationelective
LMT40307Certificate IV in Clothing ProductionQualificationelective
LMT40407Certificate IV in Custom-made FootwearQualificationelective
LMT40810Certificate IV in Laundry Operations and SupervisionQualificationelective
LMT50407Diploma of Textile Technology and Production ManagementQualificationelective
MEM50205Diploma of Engineering - TechnicalQualificationelective
MEM50211Diploma of Engineering - TechnicalQualificationelective
MEM60105Advanced Diploma of EngineeringQualificationelective
MEM60111Advanced Diploma of EngineeringQualificationelective
MSA31108Certificate III in Competitive ManufacturingQualificationelective
MSA40311Certificate IV in Process ManufacturingQualificationelective
MSA41108Certificate IV in Competitive ManufacturingQualificationelective
MSA51108Diploma of Competitive ManufacturingQualificationelective
MSA61108Advanced Diploma of Competitive ManufacturingQualificationelective
MSS40111Certificate IV in Sustainable OperationsQualificationelective
MSS50111Diploma of Sustainable OperationsQualificationelective
PMA40108Certificate IV in Process Plant TechnologyQualificationelective
PMA50108Diploma of Process Plant TechnologyQualificationelective
PMA60108Advanced Diploma of Process Plant TechnologyQualificationelective
PMC40110Certificate IV in Manufactured Mineral ProductsQualificationelective
PUA32310Certificate III in Public Safety (Explosive Ordnance Manufacture)Qualificationelective
PUA41910Certificate IV in Public Safety (Explosive Ordnance Manufacture)Qualificationelective
SFI30511Certificate III in Seafood ProcessingQualificationelective
SFI40511Certificate IV in Seafood ProcessingQualificationelective

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every MSA training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is MSACMT460A still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.