When must new enrolments into PUA41910 stop?

New enrolments are not permitted from 15 March 2013 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in PUA41910?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

PUA41910 Certificate IV in Public Safety (Explosive Ordnance Manufacture)

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

PUA41910Superseded — equivalentCertificate IV in Public Safety (Explosive Ordnance Manufacture)
equivalent
DEF41912Superseded — equivalentCertificate IV in Explosive Ordnance Manufacture
equivalent
DEF42315Superseded — equivalentCertificate IV in Explosive Ordnance Manufacture
equivalent
DEF40220CurrentCertificate IV in Explosive Ordnance Manufacture

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

PUA41907PUA41910equivalent10 February 2011
The register records this supersession but attaches no note on what changed.
PUA41910DEF41912equivalent14 March 2012
The register records this supersession but attaches no note on what changed.

Is PUA41910 on your scope?

This page is the register's record of one product. What it cannot tell you is whether PUA41910 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What PUA41910 is made of

training.gov.au lists 64 units for PUA41910. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 64 listed

Code	Unit	Core or elective	In this product
BSBOHS407A	Monitor a safe workplace	`N/A`	not current
BSBSUS301A	Implement and monitor environmentally sustainable work practices	`N/A`	not current
BSBWOR402A	Promote team effectiveness	`N/A`	not current
BSBWOR404A	Develop work priorities	`N/A`	not current
MSACMC410A	Lead change in a manufacturing environment	`N/A`	not current
MSACMC411A	Lead a competitive manufacturing team	`N/A`	not current
MSACMS400A	Implement a competitive manufacturing system	`N/A`	not current
MSACMS401A	Ensure process improvements are sustained	`N/A`	not current
MSACMS405A	Lead a manufacturing team using a balanced score card approach	`N/A`	not current
MSACMT260A	Use planning software systems in manufacturing	`N/A`	not current
MSACMT261A	Use SCADA systems in manufacturing	`N/A`	not current
MSACMT450A	Undertake process capability improvements	`N/A`	not current
MSACMT451A	Mistake proof a production process	`N/A`	not current
MSACMT452A	Apply statistics to processes in manufacturing	`N/A`	not current
MSACMT460A	Facilitate the use of planning software systems in manufacturing	`N/A`	not current
MSACMT461A	Facilitate SCADA systems in a manufacturing team or work area	`N/A`	not current
MSACMT481A	Undertake proactive maintenance analyses	`N/A`	not current
MSACMT482A	Assist in implementing a proactive maintenance strategy	`N/A`	not current
MSAPMOHS210B	Undertake first response to non-fire incidents	`N/A`	not current
MSAPMOPS400A	Optimise process/plant area	`N/A`	not current
MSAPMOPS401A	Trial new process or product	`N/A`	not current
MSAPMSUP390A	Use structured problem solving tools	`N/A`	not current
PMAOPS410B	Monitor remote production facilities	`N/A`	not current
PMAOPS411B	Manage plant shutdown and restart	`N/A`	not current
PMASUP440B	Commission/recommission plant	`N/A`	not current
PUADEFEO101D	Work safely with explosive ordnance	`N/A`	not current
PUADEFEO201C	Respond to fire	`N/A`	not current
PUADEFEO202D	Establish and maintain the safety and security of explosive warehouses and workshops	`N/A`	not current
PUADEFEO203C	Dispose of non-explosive dangerous goods	`N/A`	not current
PUADEFEO206C	Apply a knowledge of the service environment	`N/A`	not current

Show the remaining 34 units

Code	Unit	Core or elective	In this product
PUADEFEO207C	Inspect explosive ordnance facilities	`N/A`	not current
PUADEFEO208C	Supervise explosive ordnance engineering and logistics processes	`N/A`	not current
PUADEFEO209C	Control explosive ordnance engineering and logistics processes	`N/A`	not current
PUADEFEO211D	Apply a knowledge of explosive ordnance	`N/A`	not current
PUADEFEO212C	License explosive ordnance facilities and potential explosive sites	`N/A`	not current
PUADEFEO509D	Perform purging	`N/A`	not current
PUADEFEO511D	Maintain grenades	`N/A`	not current
PUADEFEO512D	Maintain mortar ammunition	`N/A`	not current
PUADEFEO513D	Maintain actuating devices	`N/A`	not current
PUADEFEO514D	Maintain pyrotechnics and countermeasures	`N/A`	not current
PUADEFEO515D	Maintain guided weapons	`N/A`	not current
PUADEFEO516D	Maintain free flight rockets	`N/A`	not current
PUADEFEO517D	Maintain gun ammunition	`N/A`	not current
PUADEFEO518D	Maintain aerial delivered ordnance	`N/A`	not current
PUADEFEO519D	Maintain mines	`N/A`	not current
PUADEFEO520D	Maintain demolition stores	`N/A`	not current
PUADEFEO601D	Assess explosive ordnance firings	`N/A`	not current
PUADEFEO602C	Plan explosive ordnance trials	`N/A`	not current
PUADEFEO603C	Conduct explosive ordnance trials	`N/A`	not current
PUADEFEO604C	Perform explosive tests, measurements and analyses	`N/A`	not current
PUADEFRI001B	Treat risk within Defence at an operational level	`N/A`	not current
PUADEFRI002B	Conduct risk assessment in a Defence environment	`N/A`	not current
PUAEMR001B	Establish context and develop risk evaluation criteria	`N/A`	not current
PUAEMR002B	Identify, analyse and evaluate risk	`N/A`	not current
PUAEMR003B	Determine treatment strategies	`N/A`	not current
PUAEMR004B	Manage treatment strategy implementation	`N/A`	not current
PUAEMR006B	Treat risk at an operational level	`N/A`	not current
PUAEMR007B	Conduct risk assessment	`N/A`	not current
TLIB607C	Carry out inspection of vehicles designed to carry special loads	`N/A`	not current
TLIC707C	Operate vehicle carrying special loads	`N/A`	not current
TLID107C	Shift materials safely using manual handling methods	`N/A`	not current
TLID1507D	Identify and label explosives and dangerous goods	`N/A`	not current
TLID1607D	Load and unload explosives and dangerous goods	`N/A`	not current
TLIF707C	Implement and coordinate accident-emergency procedures	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every PUA training product on the register · Search all training products

Is PUA41910 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.