When must new enrolments into LMT40107 stop?

New enrolments are not permitted from 4 July 2017 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in LMT40107?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

LMT40107 Certificate IV in Textile Technology and Production

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

LMT40107Superseded — equivalentCertificate IV in Textile Technology and Production
equivalent
MST40116Superseded — equivalentCertificate IV in Textile Design, Development and Production
equivalent
MST40119Superseded — equivalentCertificate IV in Textile Design, Development and Production
equivalent
MST40122CurrentCertificate IV in Textile Design and Technology

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

LMT40107MST40116equivalent3 July 2016
LMT40107 Certificate IV in Textile Technology and Production; LMT41107 Certificate IV in Textile Design and Development. Equivalent

Is LMT40107 on your scope?

This page is the register's record of one product. What it cannot tell you is whether LMT40107 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What LMT40107 is made of

training.gov.au lists 139 units for LMT40107. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 139 listed

Code	Unit	Core or elective	In this product
LMTCL2001B	Use a sewing machine	`N/A`	not current
LMTGN2002B	Apply quality standards	`N/A`	not current
LMTGN2003B	Work in the Textiles, Clothing and Footwear industry	`N/A`	not current
LMTGN2009B	Operate computing technology in a textiles, clothing and footwear workplace	`N/A`	not current
LMTGN3001B	Control production in a section of a textiles, clothing and footwear enterprise	`N/A`	not current
LMTGN3002B	Organise and plan own work to achieve planned outcomes	`N/A`	not current
LMTGN3005B	Plan tasks to assist production operations	`N/A`	not current
LMTGN3006B	Take responsibility for visitors and new employees	`N/A`	not current
LMTGN3009B	Supervise operations in a textiles, clothing and footwear enterprise	`N/A`	not current
LMTGN4001A	Coordinate or set up machines for product change	`N/A`	not current
LMTGN4002A	Participate in product engineering	`N/A`	not current
LMTGN4003A	Install and commission process and machine control programs	`N/A`	not current
LMTGN4005A	Plan and implement production within a work area	`N/A`	not current
LMTGN4006A	Evaluate equipment and systems	`N/A`	not current
LMTGN4008A	Analyse product and determine machine settings	`N/A`	not current
LMTGN4009A	Set and modify machines for product change	`N/A`	not current
LMTGN4010A	Implement and monitor OHS in the workplace	`N/A`	not current
LMTGN4011A	Coordinate the quality system and procedures	`N/A`	not current
LMTGN4012A	Fabricate or machine tooling	`N/A`	not current
LMTGN4013A	Manage technical processes	`N/A`	not current
LMTGN4014A	Design production tooling	`N/A`	not current
LMTGN4016A	Contribute to the development of products or processes	`N/A`	not current
LMTLG2006A	Identify materials used in leather goods production	`N/A`	not current
LMTLG3001A	Make a prototype	`N/A`	not current
LMTTF2001A	Despatch products	`N/A`	not current
LMTTF2003A	Package and handle products for despatch	`N/A`	not current
LMTTF2004A	Add reinforcements and attachments	`N/A`	not current
LMTTF2005A	Translate information into measurements or diagrams	`N/A`	not current
LMTTF2006A	Measure and scale geometric shapes	`N/A`	not current
LMTTF2007A	Produce patterns for 2D products	`N/A`	not current

Show the remaining 109 units

Code	Unit	Core or elective	In this product
LMTTF2008A	Use adhesives	`N/A`	not current
LMTTF2009A	Identify and select canvas and sail materials	`N/A`	not current
LMTTF2010A	Lay out and mark out canvas or sail materials	`N/A`	not current
LMTTF2011A	Cut and shape canvas or sail materials	`N/A`	not current
LMTTF2012A	Stitch by hand	`N/A`	not current
LMTTF2013A	Waterproof canvas products	`N/A`	not current
LMTTF2014A	Weld plastic materials	`N/A`	not current
LMTTF2016A	Install products on and off site	`N/A`	not current
LMTTF2017A	Cut, bend and shape metal	`N/A`	not current
LMTTF2018A	Use canvas and sail production tools	`N/A`	not current
LMTTF2019A	Inspect canvas or sail product	`N/A`	not current
LMTTF3001A	Identify customer requirements (on site)	`N/A`	not current
LMTTF3002A	Gain customer acceptance of service proposal	`N/A`	not current
LMTTF3003A	Produce patterns for 3D products	`N/A`	not current
LMTTF3004A	Perform advanced welding of plastic materials	`N/A`	not current
LMTTF3005A	Apply lofting skills to sail making	`N/A`	not current
LMTTF3006A	Cut and join sail panels	`N/A`	not current
LMTTN2001B	Set up and operate a dry laid web forming machine	`N/A`	not current
LMTTN2002B	Set up and operate a spun bond web forming machine	`N/A`	not current
LMTTN2003B	Use basic recognition techniques to identify technical and non-woven textiles	`N/A`	not current
LMTTN2004B	Undertake web bonding processes	`N/A`	not current
LMTTN2005B	Undertake web conversion and finishing	`N/A`	not current
LMTTN2006B	Identify purpose and performance outcomes of technical textile product	`N/A`	not current
LMTTN2007B	Conduct technical textile mechanical finishing processes	`N/A`	not current
LMTTN2008B	Conduct heat setting on technical textiles	`N/A`	not current
LMTTN2009B	Apply surface coating to technical textiles	`N/A`	not current
LMTTN2010B	Apply laminations and fusible interlinings to technical textiles	`N/A`	not current
LMTTN2011B	Undertake fibre blending and feeding for nonwoven technical production processes	`N/A`	not current
LMTTX2001B	Identify fibres, yarns and textile materials and their uses in textile production	`N/A`	not current
LMTTX2002B	Prepare yarn for textile manufacturing	`N/A`	not current
LMTTX2003B	Perform spinning operations	`N/A`	not current
LMTTX2004B	Perform tufting operations	`N/A`	not current
LMTTX2005B	Perform creeling operations	`N/A`	not current
LMTTX2006B	Operate a weaving loom	`N/A`	not current
LMTTX2007B	Perform knitting operations	`N/A`	not current
LMTTX2008B	Apply finishing processes to textile production	`N/A`	not current
LMTTX2009B	Weigh and check textile materials and products	`N/A`	not current
LMTTX2010B	Load and operate dyeing equipment	`N/A`	not current
LMTTX2011B	Repair textile product	`N/A`	not current
LMTTX2012B	Perform industrial sewing on textile products	`N/A`	not current
LMTTX2013B	Conduct packaging or folding for textile production	`N/A`	not current
LMTTX2014B	Use specialised machinery to assist textile production	`N/A`	not current
LMTTX2015B	Handle and prepare chemicals, dyes and other substances used in textile production	`N/A`	not current
LMTTX2016B	Perform knotting for weaving operations	`N/A`	not current
LMTTX2017B	Access and use information resources for textile production operations	`N/A`	not current
LMTTX2018B	Restart machine after stoppage	`N/A`	not current
LMTTX2019B	Undertake carding operations	`N/A`	not current
LMTTX3001B	Identify quality and types of textile fibres, yarns and fabrics	`N/A`	not current
LMTTX3002B	Contribute to textile production process improvements	`N/A`	not current
LMTTX3004B	Set up textile production machines for product change	`N/A`	not current
LMTTX3005B	Organise and interpret tests	`N/A`	not current
LMTTX3006B	Ensure efficient operation of textile machines	`N/A`	not current
LMTTX3007B	Prepare dyes for textile production	`N/A`	not current
LMTTX3008B	Select raw materials	`N/A`	not current
LMTTX3009B	Operate in a complex textile production environment	`N/A`	not current
LMTTX3010B	Monitor textile production processes	`N/A`	not current
LMTTX3011A	Set up, adjust and maintain circular knitting machines	`N/A`	not current
LMTTX3012A	Set up, adjust and maintain flat knitting machines	`N/A`	not current
LMTTX3013A	Set up, adjust and maintain spinning machines	`N/A`	not current
LMTTX3014A	Set up, adjust and maintain carding machines	`N/A`	not current
LMTTX3015A	Set up, adjust and maintain tufting looms	`N/A`	not current
LMTTX3016A	Set up, adjust and maintain domestic sewing machines	`N/A`	not current
LMTTX3017A	Set up, adjust and maintain industrial sewing machines	`N/A`	not current
LMTTX3018A	Undertake electronic fault finding on textile machinery	`N/A`	not current
LMTTX3019A	Identify and correct mechanical faults in loom and other weaving equipment	`N/A`	not current
LMTTX3020A	Identify and correct weaving process faults	`N/A`	not current
LMTTX3021A	Apply knowledge of weaving processes to production requirements	`N/A`	not current
LMTTX3022A	Set up and operate weaving looms for production	`N/A`	not current
LMTTX4001A	Interpret and apply textile calculations and specifications	`N/A`	not current
LMTTX4002A	Understand and apply textile science	`N/A`	not current
LMTTX4003A	Perform routine textile testing and analyse results	`N/A`	not current
LMTTX4004A	Select dyes and develop dye specification and recipe for production	`N/A`	not current
LMTTX4005A	Undertake textile colouration and finishing	`N/A`	not current
MEM12023A	Perform engineering measurements	`N/A`	not current
MEM12024A	Perform computations	`N/A`	not current
MEM13003B	Work safely with industrial chemicals and materials	`N/A`	not current
MEM14004A	Plan to undertake a routine task	`N/A`	not current
MEM14005A	Plan a complete activity	`N/A`	not current
MEM17003A	Assist in the provision of on the job training	`N/A`	not current
MSAENV272B	Participate in environmentally sustainable work practices	`N/A`	not current
MSAENV472B	Implement and monitor environmentally sustainable work practices	`N/A`	not current
MSS402001A	Apply competitive systems and practices	`N/A`	not current
MSS402002A	Sustain process improvements	`N/A`	not current
MSS402010A	Manage the impact of change on own work	`N/A`	not current
MSS402020A	Apply quick changeover procedures	`N/A`	not current
MSS402021A	Apply Just in Time procedures	`N/A`	not current
MSS402030A	Apply cost factors to work practices	`N/A`	not current
MSS402031A	Interpret product costs in terms of customer requirements	`N/A`	not current
MSS402040A	Apply 5S procedures	`N/A`	not current
MSS402050A	Monitor process capability	`N/A`	not current
MSS402060A	Use planning software systems in operations	`N/A`	not current
MSS402061A	Use SCADA systems in operations	`N/A`	not current
MSS402080A	Undertake root cause analysis	`N/A`	not current
MSS402081A	Contribute to the application of a proactive maintenance strategy	`N/A`	not current
MSS403001A	Implement competitive systems and practices	`N/A`	not current
MSS403002A	Ensure process improvements are sustained	`N/A`	not current
MSS403010A	Facilitate change in an organisation implementing competitive systems and practices	`N/A`	not current
MSS403021A	Facilitate a Just in Time system	`N/A`	not current
MSS403030A	Improve cost factors in work practices	`N/A`	not current
MSS403032A	Analyse manual handling processes	`N/A`	not current
MSS403040A	Facilitate and improve implementation of 5S	`N/A`	not current
MSS403051A	Mistake proof an operational process	`N/A`	not current
MSS404050A	Undertake process capability improvements	`N/A`	not current
MSS404052A	Apply statistics to operational processes	`N/A`	not current
MSS404060A	Facilitate the use of planning software systems in a work area or team	`N/A`	not current
MSS404061A	Facilitate the use of SCADA systems in a team or work area	`N/A`	not current
MSS404081A	Undertake proactive maintenance analyses	`N/A`	not current
MSS404082A	Assist in implementing a proactive maintenance strategy	`N/A`	not current
PMASUP420B	Minimise environmental impact of process	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every LMT training product on the register · Search all training products

Is LMT40107 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.