MEM14004A Plan to undertake a routine task

Supersededtraining.gov.au: supersededNonEquivalent

The currency period for MEM14004A ended on 24 June 2019 — 7 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 26 June 2020 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Unit of competency
Training package
MEM05 — Metal and Engineering Training Package
Currency period ends
24 June 2019
Latest release
Release 1 · 1 December 2005
Supersedes
nothing — no earlier product listed
Superseded by
MEM13015 not equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. MEM14004ASuperseded — not equivalentPlan to undertake a routine task
  2. not equivalent
  3. MEM13015CurrentWork safely and effectively in manufacturing and engineering

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • MEM14004AMEM13015not equivalent25 June 2019

    MEM13014A Apply principles of occupational health and safety in the work environment; MEM14004A Plan to undertake a routine task; MEM15002A Apply quality systems; MEM15024A Apply quality procedures; MEM16007A Work with others in a manufacturing, engineering or related environment. Not equivalent.

Is MEM14004A on your scope?

This page is the register's record of one product. What it cannot tell you is whether MEM14004A sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

Where MEM14004A is used

training.gov.au lists MEM14004A inside 39 training products, 3 of them current. Every one of them is below, with the register's own core or elective flag for MEM14004A in that product.

Current products 3 listed

CodeTraining productTypeMEM14004A is
MEM20105Certificate II in EngineeringQualificationelective
MSA50108Diploma of Manufacturing TechnologyQualificationelective
MSM30216Certificate III in Surface Preparation and Coating ApplicationQualificationcore

Products no longer current 36 listed

The register still records MEM14004A inside these, but it no longer recommends them as current. They are here because a scope history or an old enrolment can still point at them.

CodeTraining productTypeMEM14004A is
HLT32107Certificate III in Prosthetic/Orthotic TechnologyQualificationelective
HLT32112Certificate III in Prosthetic-Orthotic TechnologyQualificationelective
LMT31909Certificate III in Engineering - TCF MechanicQualificationelective
LMT40107Certificate IV in Textile Technology and ProductionQualificationelective
LMT50407Diploma of Textile Technology and Production ManagementQualificationelective
MEM10105Certificate I in EngineeringQualificationelective
MEM10205Certificate I in Boating ServicesQualificationelective
MEM20205Certificate II in Engineering - Production TechnologyQualificationelective
MEM20305Certificate II in Boating ServicesQualificationelective
MEM30105Certificate III in Engineering - Production SystemsQualificationelective
Show the remaining 26 products no longer current
CodeTraining productTypeMEM14004A is
MEM30205Certificate III in Engineering - Mechanical TradeQualificationelective
MEM30305Certificate III in Engineering - Fabrication TradeQualificationelective
MEM30405Certificate III in Engineering - Electrical/Electronic TradeQualificationelective
MEM30605Certificate III in Jewellery ManufactureQualificationelective
MEM30705Certificate III in Marine Craft ConstructionQualificationelective
MEM30805Certificate III in LocksmithingQualificationelective
MEM30905Certificate III in Boating ServicesQualificationelective
MEM31010Certificate III in Watch and Clock Service and RepairQualificationelective
MEM31112Certificate III in Engineering - Composites TradeQualificationelective
MEM31215Certificate III in Engineering - Industrial ElectricianQualificationcore
MEM40105Certificate IV in EngineeringQualificationelective
MEM40205Certificate IV in Boating ServicesQualificationelective
MEM40311Certificate IV in Advanced Jewellery ManufactureQualificationelective
MEM50105Diploma of Engineering - Advanced TradeQualificationelective
MSA20510Certificate II in Recreational Vehicle Service and RepairQualificationelective
MSA20610Certificate II in Recreational Vehicle ManufactureQualificationelective
MSA30309Certificate III in Surface Preparation and Coating ApplicationQualificationelective
MSA30510Certificate III in Recreational Vehicle Service and RepairQualificationelective
MSA30610Certificate III in Recreational Vehicle ManufactureQualificationelective
MSA40510Certificate IV in Recreational VehiclesQualificationelective
MSM21015Certificate II in Recreational Vehicle Service and RepairQualificationelective
MSM21115Certificate II in Recreational Vehicle ManufacturingQualificationelective
MSM31015Certificate III in Recreational Vehicle Service and RepairQualificationelective
MSM31115Certificate III in Recreational Vehicle ManufacturingQualificationelective
MSM41015Certificate IV in Recreational VehiclesQualificationelective
MST40116Certificate IV in Textile Design, Development and ProductionQualificationelective

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every MEM training product on the register · Search all training products

Is MEM14004A still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.