When must new enrolments into MEM40205 stop?

New enrolments are not permitted from 19 December 2023 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in MEM40205?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

MEM40205 Certificate IV in Boating Services

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

MEM40205Superseded — equivalentCertificate IV in Boating Services
equivalent
MEM40222CurrentCertificate IV in Boating Services

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

MEM40205MEM40222equivalent18 December 2022
The register records this supersession but attaches no note on what changed.

Is MEM40205 on your scope?

This page is the register's record of one product. What it cannot tell you is whether MEM40205 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What MEM40205 is made of

training.gov.au lists 41 units for MEM40205. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 41 listed

Code	Unit	Core or elective	In this product
BSALF401A	Maintain trust accounts	`N/A`	not current
BSBADM402A	Produce complex business documents	`N/A`	not current
BSBADM408A	Prepare financial reports	`N/A`	not current
BSBCMN406A	Maintain business technology	`N/A`	not current
BSBCMN408A	Report on financial activity	`N/A`	not current
BSBRKG301A	Control records	`N/A`	not current
MEM04018B	Perform general woodworking machine operations	`N/A`	not current
MEM05003B	Perform soft soldering	`N/A`	not current
MEM05005B	Carry out mechanical cutting	`N/A`	not current
MEM05007C	Perform manual heating and thermal cutting	`N/A`	not current
MEM05012C	Perform routine manual metal arc welding	`N/A`	not current
MEM05050B	Perform routine gas metal arc welding	`N/A`	not current
MEM09002B	Interpret technical drawing	`N/A`	not current
MEM11010B	Operate mobile load shifting equipment	`N/A`	not current
MEM11011B	Undertake manual handling	`N/A`	not current
MEM12006C	Mark off/out (general engineering)	`N/A`	not current
MEM12007D	Mark off/out structural fabrications and shapes	`N/A`	not current
MEM12023A	Perform engineering measurements	`N/A`	not current
MEM13003B	Work safely with industrial chemicals and materials	`N/A`	not current
MEM13014A	Apply principles of occupational health and safety in the work environment	`N/A`	not current
MEM14004A	Plan to undertake a routine task	`N/A`	not current
MEM15024A	Apply quality procedures	`N/A`	not current
MEM16006A	Organise and communicate information	`N/A`	not current
MEM16007A	Work with others in a manufacturing, engineering or related environment	`N/A`	not current
MEM18001C	Use hand tools	`N/A`	not current
MEM18002B	Use power tools/hand held operations	`N/A`	not current
MEM25001B	Apply fibre-reinforced materials	`N/A`	not current
MEM25004B	Fair and shape surfaces	`N/A`	not current
MEM25007B	Maintain marine vessel surfaces	`N/A`	not current
MEM50001B	Classify recreational boating technologies and features	`N/A`	not current

Show the remaining 11 units

Code	Unit	Core or elective	In this product
MEM50002B	Work safely on marine craft	`N/A`	not current
MEM50003B	Follow work procedures to maintain the marine environment	`N/A`	not current
MEM50004B	Maintain quality of environment by following marina codes	`N/A`	not current
MEM50005B	Refuel vessels	`N/A`	not current
MEM50006B	Check operational capability of marine craft	`N/A`	not current
MEM50007B	Check operational capability of sails and sail operating equipment	`N/A`	not current
MEM50008B	Carry out trip preparation and planning	`N/A`	not current
MEM50009B	Safely operate a mechanically powered recreational boat	`N/A`	not current
MEM50010B	Respond to boating emergencies and incidents	`N/A`	not current
MSAENV272B	Participate in environmentally sustainable work practices	`N/A`	not current
MSAENV472B	Implement and monitor environmentally sustainable work practices	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every MEM training product on the register · Search all training products

Is MEM40205 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.