When must new enrolments into MEM20205 stop?

New enrolments are not permitted from 26 June 2020 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in MEM20205?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

MEM20205 Certificate II in Engineering - Production Technology

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

MEM20205Superseded — equivalentCertificate II in Engineering - Production Technology
equivalent
MEM20219CurrentCertificate II in Engineering - Production Technology

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

MEM20205MEM20219equivalent25 June 2019
The register records this supersession but attaches no note on what changed.

Is MEM20205 on your scope?

This page is the register's record of one product. What it cannot tell you is whether MEM20205 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What MEM20205 is made of

training.gov.au lists 262 units for MEM20205. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 262 listed

Code	Unit	Core or elective	In this product
CPCCLDG3001A	Licence to perform dogging	`N/A`	not current
CPCCLRG3001A	Licence to perform rigging basic level	`N/A`	not current
CPCCLSF2001A	Licence to erect, alter and dismantle scaffolding basic level	`N/A`	not current
CPCCLSF3001A	Licence to erect, alter and dismantle scaffolding intermediate level	`N/A`	not current
MEM03001B	Perform manual production assembly	`N/A`	not current
MEM03002B	Perform precision assembly	`N/A`	not current
MEM03003B	Perform sheet and plate assembly	`N/A`	not current
MEM03004B	Perform electronic/electrical assembly (production)	`N/A`	not current
MEM03005B	Rework and repair (electrical/electronic production)	`N/A`	not current
MEM03006B	Set assembly stations	`N/A`	not current
MEM04001B	Operate melting furnaces	`N/A`	not current
MEM04002B	Perform gravity die casting	`N/A`	not current
MEM04003B	Operate pressure die casting machine	`N/A`	not current
MEM04004B	Prepare and mix sand for metal moulding	`N/A`	not current
MEM04006B	Operate sand moulding and core making machines	`N/A`	not current
MEM04007B	Pour molten metal	`N/A`	not current
MEM04008B	Fettle and trim metal castings/forgings	`N/A`	not current
MEM04018B	Perform general woodworking machine operations	`N/A`	not current
MEM04019B	Perform refractory installation and repair	`N/A`	not current
MEM05001B	Perform manual soldering/desoldering - electrical/electronic components	`N/A`	not current
MEM05002B	Perform high reliability soldering and desoldering	`N/A`	not current
MEM05003B	Perform soft soldering	`N/A`	not current
MEM05004C	Perform routine oxy acetylene welding	`N/A`	not current
MEM05005B	Carry out mechanical cutting	`N/A`	not current
MEM05006C	Perform brazing and or silver soldering	`N/A`	not current
MEM05007C	Perform manual heating and thermal cutting	`N/A`	not current
MEM05009C	Perform automated thermal cutting	`N/A`	not current
MEM05012C	Perform routine manual metal arc welding	`N/A`	not current
MEM05013C	Perform manual production welding	`N/A`	not current
MEM05014C	Monitor quality of production welding/fabrications	`N/A`	not current

Show the remaining 232 units

Code	Unit	Core or elective	In this product
MEM05015D	Weld using manual metal arc welding process	`N/A`	not current
MEM05017D	Weld using gas metal arc welding process	`N/A`	not current
MEM05019D	Weld using gas tungsten arc welding process	`N/A`	not current
MEM05023C	Weld using submerged arc welding process	`N/A`	not current
MEM05027A	Perform aluminothermic welding	`N/A`	not current
MEM05041B	Weld using powder flame spraying	`N/A`	not current
MEM05049B	Perform routine gas tungsten arc welding	`N/A`	not current
MEM05050B	Perform routine gas metal arc welding	`N/A`	not current
MEM05051A	Select welding processes	`N/A`	not current
MEM05052A	Apply safe welding practices	`N/A`	not current
MEM05053A	Set and edit computer controlled thermal cutting machines	`N/A`	not current
MEM06001B	Perform hand forging	`N/A`	not current
MEM06002B	Perform hammer forging	`N/A`	not current
MEM06003C	Carry out heat treatment	`N/A`	not current
MEM06004B	Select heat treatment processes and test finished product	`N/A`	not current
MEM06005B	Perform drop and upset forging	`N/A`	not current
MEM06006C	Repair springs	`N/A`	not current
MEM06007B	Perform basic incidental heat/quenching, tempering and annealing	`N/A`	not current
MEM06008A	Hammer forge complex shapes	`N/A`	not current
MEM06009A	Hand forge complex shapes	`N/A`	not current
MEM07001B	Perform operational maintenance of machines/equipment	`N/A`	not current
MEM07003B	Perform machine setting (routine)	`N/A`	not current
MEM07004B	Perform machine setting (complex)	`N/A`	not current
MEM07005C	Perform general machining	`N/A`	not current
MEM07014B	Perform electro-discharge (EDM) machining operations	`N/A`	not current
MEM07015B	Set computer controlled machines/processes	`N/A`	not current
MEM07016C	Set and edit computer controlled machines/processes	`N/A`	not current
MEM07024B	Operate and monitor machine/process	`N/A`	not current
MEM07025B	Perform advanced machine/process operation	`N/A`	not current
MEM07026B	Perform advanced plastic processing	`N/A`	not current
MEM07027B	Perform advanced press operations	`N/A`	not current
MEM07028B	Operate computer controlled machines/processes	`N/A`	not current
MEM07029B	Perform routine sharpening/maintenance of production tools and cutters	`N/A`	not current
MEM07030C	Perform metal spinning lathe operations (basic)	`N/A`	not current
MEM07031C	Perform metal spinning lathe operations (complex)	`N/A`	not current
MEM07032B	Use workshop machines for basic operations	`N/A`	not current
MEM07033B	Operate and monitor basic boiler	`N/A`	not current
MEM07034A	Operate and monitor intermediate class boiler	`N/A`	current
MEM07040A	Set multistage integrated processes	`N/A`	not current
MEM07041A	Perform production machining	`N/A`	not current
MEM08001B	Perform wire, jig and barrel load/unload work	`N/A`	not current
MEM08002C	Pre-treat work for subsequent surface coating	`N/A`	not current
MEM08003C	Perform electroplating operations	`N/A`	not current
MEM08004B	Finish work using wet, dry and vapour deposition methods	`N/A`	not current
MEM08005B	Prepare and produce specialised coatings	`N/A`	not current
MEM08006B	Produce clear and/or coloured and/or sealed anodised films on aluminium	`N/A`	not current
MEM08007B	Control surface finish production and finished product quality	`N/A`	not current
MEM08008B	Operate and control surface finishing waste treatment process	`N/A`	not current
MEM08009C	Make up solutions	`N/A`	not current
MEM08010B	Manually finish/polish materials	`N/A`	not current
MEM08011B	Prepare surfaces using solvents and/or mechanical means	`N/A`	not current
MEM08012B	Prepare surfaces by abrasive blasting (basic)	`N/A`	not current
MEM08013B	Prepare surfaces by abrasive blasting (advanced)	`N/A`	not current
MEM08014B	Apply protective coatings (basic)	`N/A`	not current
MEM08015B	Apply protective coatings (advanced)	`N/A`	not current
MEM08016B	Control blast coating by-products, materials and emissions	`N/A`	not current
MEM08018B	Electroplate engineering coatings	`N/A`	not current
MEM08019B	Electroplate protective finishes	`N/A`	not current
MEM08020B	Electroplate decorative finishes	`N/A`	not current
MEM09002B	Interpret technical drawing	`N/A`	not current
MEM10002B	Terminate and connect electrical wiring	`N/A`	not current
MEM10009B	Install refrigeration and air conditioning plant and equipment	`N/A`	not current
MEM10010B	Install pipework and pipework assemblies	`N/A`	not current
MEM10011B	Terminate and connect specialist cables	`N/A`	not current
MEM10013A	Install split air conditioning systems and associated pipework	`N/A`	not current
MEM11001C	Erect/dismantle scaffolding and equipment	`N/A`	not current
MEM11002C	Erect/dismantle complex scaffolding and equipment	`N/A`	not current
MEM11003B	Coordinate erection/dismantling of complex scaffolding/equipment	`N/A`	not current
MEM11004B	Undertake dogging	`N/A`	not current
MEM11005B	Pick and process order	`N/A`	not current
MEM11006B	Perform production packaging	`N/A`	not current
MEM11007B	Administer inventory procedures	`N/A`	not current
MEM11008B	Package materials (stores and warehouse)	`N/A`	not current
MEM11009B	Handle/move bulk fluids/gases	`N/A`	not current
MEM11010B	Operate mobile load shifting equipment	`N/A`	not current
MEM11011B	Undertake manual handling	`N/A`	not current
MEM11012B	Purchase materials	`N/A`	not current
MEM11013B	Undertake warehouse receival process	`N/A`	not current
MEM11014B	Undertake warehouse dispatch process	`N/A`	not current
MEM11015B	Manage warehouse inventory system	`N/A`	not current
MEM11016B	Order materials	`N/A`	not current
MEM11017B	Organise and lead stocktakes	`N/A`	not current
MEM11018B	Organise and maintain warehouse stock receival and/or dispatch system	`N/A`	not current
MEM11019B	Undertake tool store procedures	`N/A`	not current
MEM11020B	Perform advanced warehouse computer operations	`N/A`	not current
MEM11021B	Perform advanced operation of load shifting equipment	`N/A`	not current
MEM11022B	Operate fixed/moveable load shifting equipment	`N/A`	not current
MEM11023A	Operate a bridge and gantry crane	`N/A`	not current
MEM11024A	Undertake basic rigging	`N/A`	not current
MEM11025A	Operate a non-slewing mobile crane of greater than three tonnes capacity	`N/A`	not current
MEM12001B	Use comparison and basic measuring devices	`N/A`	not current
MEM12002B	Perform electrical/electronic measurement	`N/A`	not current
MEM12019B	Measure components using coordinate measuring machines	`N/A`	not current
MEM12020B	Set and operate coordinate measuring machines	`N/A`	not current
MEM12023A	Perform engineering measurements	`N/A`	not current
MEM12024A	Perform computations	`N/A`	not current
MEM13001B	Perform emergency first aid	`N/A`	not current
MEM13002B	Undertake occupational health and safety activities in the workplace	`N/A`	not current
MEM13003B	Work safely with industrial chemicals and materials	`N/A`	not current
MEM13004B	Work safely with molten metals/glass	`N/A`	not current
MEM13007B	Maintain water treatment systems for cooling towers	`N/A`	not current
MEM13013B	Work safely with ionizing radiation	`N/A`	not current
MEM13014A	Apply principles of occupational health and safety in the work environment	`N/A`	not current
MEM14004A	Plan to undertake a routine task	`N/A`	not current
MEM14005A	Plan a complete activity	`N/A`	not current
MEM15001B	Perform basic statistical quality control	`N/A`	not current
MEM15002A	Apply quality systems	`N/A`	not current
MEM15003B	Use improvement processes in team activities	`N/A`	not current
MEM15004B	Perform inspection	`N/A`	not current
MEM15024A	Apply quality procedures	`N/A`	not current
MEM16002C	Conduct formal interviews and negotiations	`N/A`	not current
MEM16004B	Perform internal/external customer service	`N/A`	not current
MEM16005A	Operate as a team member to conduct manufacturing, engineering or related activities	`N/A`	not current
MEM16006A	Organise and communicate information	`N/A`	not current
MEM16007A	Work with others in a manufacturing, engineering or related environment	`N/A`	not current
MEM16008A	Interact with computing technology	`N/A`	not current
MEM16013A	Operate in a self-directed team	`N/A`	not current
MEM17001B	Assist in development and deliver training in the workplace	`N/A`	not current
MEM17002B	Conduct workplace assessment	`N/A`	not current
MEM17003A	Assist in the provision of on the job training	`N/A`	not current
MEM18001C	Use hand tools	`N/A`	not current
MEM18002B	Use power tools/hand held operations	`N/A`	not current
MEM18003C	Use tools for precision work	`N/A`	not current
MEM18013B	Perform gland packing	`N/A`	not current
MEM18024B	Maintain engine cooling systems	`N/A`	not current
MEM18025B	Service combustion engines	`N/A`	not current
MEM18026C	Test compression ignition fuel systems	`N/A`	not current
MEM18027C	Overhaul engine fuel system components	`N/A`	not current
MEM18028B	Maintain engine lubrication systems	`N/A`	not current
MEM18029B	Tune diesel engines	`N/A`	not current
MEM18030B	Diagnose and rectify low voltage electrical systems	`N/A`	not current
MEM18031B	Diagnose and rectify low voltage starting systems	`N/A`	not current
MEM18032B	Maintain induction/exhaust systems	`N/A`	not current
MEM18033B	Perform engine bottom-end overhaul	`N/A`	not current
MEM18035B	Diagnose and rectify braking systems	`N/A`	not current
MEM18037B	Diagnose and rectify low voltage charging systems	`N/A`	not current
MEM18038B	Maintain wheels and tyres	`N/A`	not current
MEM18039B	Diagnose and rectify track type undercarriage	`N/A`	not current
MEM18040B	Maintain suspension systems	`N/A`	not current
MEM18041B	Maintain steering systems	`N/A`	not current
MEM18042C	Diagnose and rectify manual transmissions	`N/A`	not current
MEM18043C	Diagnose and rectify automatic transmissions	`N/A`	not current
MEM18044C	Diagnose and rectify drive line and final drives	`N/A`	not current
MEM18055B	Dismantle, replace and assemble engineering components	`N/A`	not current
MEM18063B	Terminate signal and data cables	`N/A`	not current
MEM18071B	Connect/disconnect fluid conveying system components	`N/A`	not current
MEM18072B	Manufacture fluid conveying conductor assemblies	`N/A`	not current
MEM18084A	Commission and decommission split air conditioning systems	`N/A`	not current
MEM18085A	Install, service and repair domestic air conditioning and refrigeration appliances	`N/A`	not current
MEM18086B	Test, recover, evacuate and charge refrigeration systems	`N/A`	not current
MEM18098A	Prepare to perform work associated with fuel system installation and servicing	`N/A`	not current
MEM19001B	Perform jewellery metal casting	`N/A`	not current
MEM19002B	Prepare jewellery illustrations	`N/A`	not current
MEM19003B	Handle gem materials	`N/A`	not current
MEM19004B	Handle and examine gemstone materials	`N/A`	not current
MEM19005B	Produce three-dimensional precision items	`N/A`	not current
MEM19006B	Replace watch batteries	`N/A`	not current
MEM19007B	Perform gemstone setting	`N/A`	not current
MEM19008B	Prepare jewellery designs	`N/A`	not current
MEM19009B	Perform investment procedures for lost wax casting process	`N/A`	not current
MEM19010B	Produce rubber moulds for lost wax casting process	`N/A`	not current
MEM19011B	Perform wax injection of moulds for lost wax casting process	`N/A`	not current
MEM19012B	Produce jewellery wax model	`N/A`	not current
MEM19013B	Produce jewellery metal masters	`N/A`	not current
MEM19014B	Perform hand engraving	`N/A`	not current
MEM19015B	Perform jewellery enamelling	`N/A`	not current
MEM19016B	Construct jewellery components	`N/A`	not current
MEM19017B	Fabricate jewellery items	`N/A`	not current
MEM19018B	Repair jewellery items	`N/A`	not current
MEM19020B	Fault-find and maintain micro-mechanisms	`N/A`	not current
MEM19021B	Diagnose and service micro-mechanisms	`N/A`	not current
MEM20001A	Produce keys	`N/A`	not current
MEM20002A	Assemble and test lock mechanisms	`N/A`	not current
MEM20003A	Install and upgrade locks and hardware	`N/A`	not current
MEM20004A	Gain entry	`N/A`	not current
MEM20006A	Maintain and service mechanical locking devices	`N/A`	not current
MEM20014A	Perform a site security survey	`N/A`	not current
MEM21001A	Replace watch batteries, capacitors and bands	`N/A`	not current
MEM21002A	Perform watch movement exchange	`N/A`	not current
MEM21003A	Perform watch case servicing, repair and refurbishment	`N/A`	not current
MEM21004A	Clean watch and clock components	`N/A`	not current
MEM21005A	Diagnose faults in quartz watches	`N/A`	not current
MEM21006A	Service quartz watches	`N/A`	not current
MEM21007A	Service complex quartz watches	`N/A`	not current
MEM21008A	Service mechanical watches	`N/A`	not current
MEM24001B	Perform basic penetrant testing	`N/A`	not current
MEM24003B	Perform basic magnetic particle testing	`N/A`	not current
MEM25001B	Apply fibre-reinforced materials	`N/A`	not current
MEM25002B	Form and integrate fibre-reinforced structures	`N/A`	not current
MEM25004B	Fair and shape surfaces	`N/A`	not current
MEM25006B	Undertake marine sheathing operations	`N/A`	not current
MEM25007B	Maintain marine vessel surfaces	`N/A`	not current
MEM25011B	Install marine systems	`N/A`	not current
MEM25012B	Install and test operations of marine auxiliary systems	`N/A`	not current
MEM25014B	Perform marine slipping operations	`N/A`	not current
MEM25015A	Assemble and install equipment and accessories/ancillaries	`N/A`	not current
MEM26001A	Lay up composites using open moulding techniques	`N/A`	not current
MEM26002A	Lay up composites using vacuum closed moulding techniques	`N/A`	not current
MEM26003A	Lay up composites using pressure closed moulding techniques	`N/A`	not current
MEM26004A	Make basic plugs for composites fabrication	`N/A`	not current
MEM26005A	Make basic moulds for composites fabrication	`N/A`	not current
MEM26006A	Mark and cut out sheets for composite use	`N/A`	not current
MEM26007A	Select and use reinforcing appropriate for product	`N/A`	not current
MEM26008A	Select and use resin systems appropriate for product	`N/A`	not current
MEM26009A	Select and use cores and fillers appropriate for product	`N/A`	not current
MEM26010A	Store and handle composite materials	`N/A`	not current
MEM26011A	Determine materials and techniques for a composite component or product	`N/A`	not current
MEM26012A	Record and trial work processes for one-off composite products	`N/A`	not current
MEM26013A	Select and use composite processes or systems appropriate for product	`N/A`	not current
MEM26014A	Adjust resin chemicals for current conditions	`N/A`	not current
MEM26015A	Select and apply repair techniques	`N/A`	not current
MEM26016A	Select and use joining techniques	`N/A`	not current
MEM26017A	Prepare composite or other substrate surfaces	`N/A`	not current
MEM26018A	Organise composite trials	`N/A`	not current
MEM26019A	Finish a composite product	`N/A`	not current
MEM26020A	Identify and interpret required standards for composites	`N/A`	not current
MEM50002B	Work safely on marine craft	`N/A`	not current
MEM50003B	Follow work procedures to maintain the marine environment	`N/A`	not current
MEM50004B	Maintain quality of environment by following marina codes	`N/A`	not current
MEM50009B	Safely operate a mechanically powered recreational boat	`N/A`	not current
MSAENV272B	Participate in environmentally sustainable work practices	`N/A`	not current
PMBPROD291B	Operate resin infusion moulding equipment	`N/A`	not current
PMBPROD294B	Operate resin transfer moulding equipment	`N/A`	not current
PMBPROD298B	Operate equipment using pre-preg material	`N/A`	not current
PMBPROD391B	Produce composites using resin infusion	`N/A`	not current
PMBPROD394B	Produce composites using resin transfer moulding	`N/A`	not current
PMBPROD398B	Produce composites using pre-pregs	`N/A`	not current
TLILIC0012A	Licence to operate a vehicle loading crane (capacity 10 metre tonnes and above)	`N/A`	not current
TLILIC2001A	Licence to operate a forklift truck	`N/A`	not current
TLILIC2002A	Licence to operate an order picking forklift truck	`N/A`	not current
TLILIC3003A	Licence to operate a bridge and gantry crane	`N/A`	not current
TLILIC3006A	Licence to operate a non-slewing mobile crane (greater than 3 tonnes capacity)	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every MEM training product on the register · Search all training products

Is MEM20205 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.