Where the register points next
training.gov.au points at nothing after MEM20219: it is the current product, and no replacement is listed.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is MEM20219 on your scope?
This page is the register's record of one product. What it cannot tell you is whether MEM20219 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What MEM20219 is made of
training.gov.au lists 122 units for MEM20219: 7 core and 115 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 7 listed
| Code | Unit | In this product |
|---|---|---|
| MEM11011 | Undertake manual handling | ●current |
| MEM12023 | Perform engineering measurements | ●current |
| MEM13015 | Work safely and effectively in manufacturing and engineering | ●current |
| MEM16006 | Organise and communicate information | ●current |
| MEM17003 | Assist in the provision of on-the-job training | ●current |
| MEM18001 | Use hand tools | ●current |
| MSMENV272 | Participate in environmentally sustainable work practices | ●current |
Elective units 115 listed
| Code | Unit | In this product |
|---|---|---|
| CPCCLDG3001 | Licence to perform dogging | ●current |
| CPCCLRG3001 | Licence to perform rigging basic level | ●current |
| CPCCLSF2001 | Licence to erect, alter and dismantle scaffolding basic level | ●current |
| CPCCLSF3001 | Licence to erect, alter and dismantle scaffolding intermediate level | ●current |
| MEM03001 | Perform manual production assembly | ●current |
| MEM03002 | Perform precision assembly | ●current |
| MEM03003 | Perform sheet and plate assembly | ●current |
| MEM03004 | Perform electronic/electrical assembly (production) | ●current |
| MEM03005 | Rework and repair (electrical/electronic production) | ●current |
| MEM03006 | Set assembly stations | ●current |
| MEM04001 | Operate melting furnaces | ●current |
| MEM04002 | Perform gravity die casting | ●current |
| MEM04003 | Operate pressure die casting machine | ●current |
| MEM04004 | Prepare and mix sand for metal moulding | ●current |
| MEM04006 | Operate sand moulding and core making machines | ●current |
| MEM04007 | Pour molten metal | ●current |
| MEM04008 | Fettle and trim metal castings/forgings | ●current |
| MEM04018 | Perform general woodworking machine operations | ●current |
| MEM04019 | Perform refractory installation and repair | ●current |
| MEM05001 | Perform manual soldering/desoldering - electrical/electronic components | ●current |
| MEM05002 | Perform high reliability soldering and desoldering | ●current |
| MEM05003 | Perform soft soldering | ●current |
| MEM05004 | Perform routine oxy fuel gas welding | ●current |
| MEM05005 | Carry out mechanical cutting | ●current |
| MEM05006 | Perform brazing and/or silver soldering | ●current |
| MEM05007 | Perform manual heating and thermal cutting | ●current |
| MEM05009 | Perform automated thermal cutting | ●current |
| MEM05012 | Perform routine manual metal arc welding | ●current |
| MEM05013 | Perform manual production welding | ●current |
| MEM05014 | Monitor quality of production welding/fabrications | ●current |
Show the remaining 85 elective units
| Code | Unit | In this product |
|---|---|---|
| MEM05027 | Perform aluminothermic welding | ●current |
| MEM05049 | Perform routine gas tungsten arc welding | ●current |
| MEM05050 | Perform routine gas metal arc welding | ●current |
| MEM05057 | Perform routine submerged arc welding | ●current |
| MEM06007 | Perform basic incidental heat/quenching, tempering and annealing | ●current |
| MEM06010 | Perform hand forging | ●current |
| MEM07001 | Perform operational maintenance of machines/equipment | ●current |
| MEM07003 | Perform routine machine setting | ●current |
| MEM07004 | Perform complex machine setting | ●current |
| MEM07015 | Set computer controlled machines and processes | ●current |
| MEM07024 | Operate and monitor machine and process | ●current |
| MEM07028 | Operate computer controlled machines and processes | ●current |
| MEM07029 | Perform routine sharpening and maintenance of production tools and cutters | ●current |
| MEM07030 | Perform basic metal spinning lathe operations | ●current |
| MEM07032 | Use workshop machines for basic operations | ●current |
| MEM07033 | Operate and monitor basic boiler | ●current |
| MEM07041 | Perform production machining | ●current |
| MEM08001 | Perform wire, jig and barrel load/unload work | ●current |
| MEM08002 | Pre-treat work for subsequent surface coating | ●current |
| MEM08003 | Perform electroplating operations | ●current |
| MEM08004 | Finish work using wet, dry and vapour deposition methods | ●current |
| MEM08005 | Prepare and produce specialised coatings | ●current |
| MEM08006 | Produce clear and/or coloured and/or sealed anodised films on aluminium | ●current |
| MEM08007 | Control surface finish production and finished product quality | ●current |
| MEM08008 | Operate and control surface finishing waste treatment process | ●current |
| MEM08009 | Make up solutions | ●current |
| MEM08010 | Manually finish/polish materials | ●current |
| MEM08011 | Prepare surfaces using solvents and/or mechanical means | ●current |
| MEM08012 | Prepare surfaces by abrasive blasting (basic) | ●current |
| MEM08013 | Prepare surfaces by abrasive blasting (advanced) | ●current |
| MEM08014 | Apply protective coatings (basic) | ●current |
| MEM08015 | Apply protective coatings (advanced) | ●current |
| MEM08016 | Control blast coating by-products, materials and emissions | ●current |
| MEM08018 | Electroplate engineering coatings | ●current |
| MEM08019 | Electroplate protective finishes | ●current |
| MEM09002 | Interpret technical drawing | ●current |
| MEM10002 | Terminate and connect electrical wiring | ●current |
| MEM10013 | Install split air conditioning systems and associated pipework | ●current |
| MEM11001 | Erect/dismantle scaffolding and equipment | ●current |
| MEM11002 | Erect/dismantle intermediate scaffolding and equipment | ●current |
| MEM11004 | Undertake dogging | ●current |
| MEM11005 | Pick and process order | ●current |
| MEM11006 | Perform production packaging | ●current |
| MEM11007 | Administer inventory procedures | ●current |
| MEM11008 | Package materials (stores and warehouse) | ●current |
| MEM11009 | Handle/move bulk fluids/gases | ●current |
| MEM11010 | Operate mobile load shifting equipment | ●current |
| MEM11013 | Undertake warehouse receival process | ●current |
| MEM11014 | Undertake warehouse dispatch process | ●current |
| MEM11016 | Order materials | ●current |
| MEM11019 | Undertake tool store procedures | ●current |
| MEM11021 | Perform advanced operation of load shifting equipment | ●current |
| MEM11022 | Operate fixed/moveable load shifting equipment | ●current |
| MEM11023 | Operate a bridge and gantry crane | ●current |
| MEM11024 | Undertake basic rigging | ●current |
| MEM11025 | Operate a non-slewing mobile crane of greater than three tonnes capacity | ●current |
| MEM12001 | Use comparison and basic measuring devices | ●current |
| MEM12002 | Perform electrical/electronic measurement | ●current |
| MEM12019 | Measure components using coordinate measuring machines | ●current |
| MEM12024 | Perform computations | ●current |
| MEM13001 | Perform emergency first aid | ●current |
| MEM13003 | Work safely with industrial chemicals and materials | ●current |
| MEM13004 | Work safely with molten metals/glass | ●current |
| MEM13007 | Maintain water treatment systems for cooling towers | ●current |
| MEM13018 | Work safely with ionizing radiation | ●current |
| MEM13019 | Undertake work health and safety activities in the workplace | ●current |
| MEM14006 | Plan work activities | ●current |
| MEM15001 | Perform basic statistical quality control | ●current |
| MEM15003 | Use improvement processes in team activities | ●current |
| MEM15004 | Perform inspection | ●current |
| MEM16004 | Perform internal/external customer service | ●current |
| MEM16005 | Operate as a team member to conduct manufacturing, engineering or related activities | ●current |
| MEM16008 | Interact with computing technology | ●current |
| MEM18002 | Use power tools/hand held operations | ●current |
| MEM18055 | Dismantle, replace and assemble engineering components | ●current |
| MEM18083 | Handle fluorocarbon refrigerants according to regulations | ●current |
| MEM18084 | Commission and decommission split air conditioning systems | ●current |
| MEM18086 | Test, recover, evacuate and charge refrigeration systems | ●current |
| MEM18098 | Prepare to perform work associated with fuel system installation and servicing | ●current |
| MEM27029 | Maintain wheels and tyres | ●current |
| MEM27032 | Service combustion engines | ●current |
| TLILIC0003 | Licence to operate a forklift truck | ●current |
| TLILIC0004 | Licence to operate an order picking forklift truck | ●current |
| TLILIC0016 | Licence to operate a bridge and gantry crane | ●current |
| TLILIC0040 | Licence to operate a non-slewing mobile crane (greater than 3 tonnes capacity) | ●current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every MEM training product on the register · Search all training products
Deliver this? We read the register nightly — get the free breakdown of your whole scope, and hear the day MEM20219 or anything else on it is superseded.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.