Where the register points next
training.gov.au points at nothing after MEM11011: it is the current product, and no replacement is listed.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is MEM11011 on your scope?
This page is the register's record of one product. What it cannot tell you is whether MEM11011 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
Where MEM11011 is used
training.gov.au lists MEM11011 inside 83 training products, 67 of them current. Every one of them is below, with the register's own core or elective flag for MEM11011 in that product.
Current products 67 listed
| Code | Training product | Type | MEM11011 is |
|---|---|---|---|
| AHC20324 | Certificate II in Production Horticulture | Qualification | ◇elective |
| AHC21624 | Certificate II in Landscaping | Qualification | ◇elective |
| AHC32424 | Certificate III in Irrigation Technology | Qualification | ◇elective |
| AUR20320 | Certificate II in Bicycle Mechanical Technology | Qualification | ◇elective |
| AUR30220 | Certificate III in Bicycle Workshop Operations | Qualification | ◇elective |
| AUR30720 | Certificate III in Outdoor Power Equipment Technology | Qualification | ◇elective |
| AUR30920 | Certificate III in Motor Sport Technology | Qualification | ◇elective |
| AUR31520 | Certificate III in Automotive Diesel Engine Technology | Qualification | ◇elective |
| AUR32126 | Certificate III in Automotive Body Repair Technology | Qualification | ◇elective |
| CPC20220 | Certificate II in Construction Pathways | Qualification | ◇elective |
| CPC32420 | Certificate III in Plumbing | Qualification | ◇elective |
| CPC32620 | Certificate III in Roof Plumbing | Qualification | ◇elective |
| CPC32720 | Certificate III in Gas Fitting | Qualification | ◇elective |
| CUA30425 | Certificate III in Live Production and Technical Services | Qualification | ◇elective |
| FWP20322 | Certificate II in Timber and Wood Products Operations | Qualification | ◇elective |
| FWP31021 | Certificate III in Saw Technology | Qualification | ◇elective |
| FWPSS00039 | Skill Set for Hydraulic Maintenance of Saw Technology | Skill set | ◇elective |
| FWPSS00040 | Skill Set for Pneumatic Maintenance of Saw Technology | Skill set | ◇elective |
| MEM10119 | Certificate I in Engineering | Qualification | ◇elective |
| MEM10222 | Certificate I in Boating Services | Qualification | ◇elective |
| MEM20219 | Certificate II in Engineering - Production Technology | Qualification | ◆core |
| MEM20322 | Certificate II in Boating Services | Qualification | ◇elective |
| MEM20422 | Certificate II in Engineering Pathways | Qualification | ◇elective |
| MEM30119 | Certificate III in Engineering - Production Systems | Qualification | ◆core |
| MEM30219 | Certificate III in Engineering - Mechanical Trade | Qualification | ◆core |
Show the remaining 42 current products
| Code | Training product | Type | MEM11011 is |
|---|---|---|---|
| MEM30422 | Certificate III in Engineering - Electronic Trade | Qualification | ◆core |
| MEM30522 | Certificate III in Engineering - Technical | Qualification | ◇elective |
| MEM30619 | Certificate III in Jewellery Manufacture | Qualification | ◆core |
| MEM30719 | Certificate III in Marine Craft Construction | Qualification | ◆core |
| MEM30819 | Certificate III in Locksmithing | Qualification | ◆core |
| MEM30919 | Certificate III in Boating Services | Qualification | ◇elective |
| MEM31019 | Certificate III in Watch and Clock Service and Repair | Qualification | ◆core |
| MEM31119 | Certificate III in Engineering - Composites Trade | Qualification | ◆core |
| MEM31322 | Certificate III in Refrigeration and Air Conditioning | Qualification | ◆core |
| MEM31419 | Certificate III in Engineering - Fixed and Mobile Plant Mechanic | Qualification | ◆core |
| MEM31519 | Certificate III in Engineering - Toolmaking Trade | Qualification | ◆core |
| MEM31622 | Certificate III in Engineering - Patternmaking Trade | Qualification | ◆core |
| MEM31719 | Certificate III in Engineering - Casting and Moulding Trade | Qualification | ◆core |
| MEM31822 | Certificate III in Engineering - Textile Mechanic | Qualification | ◆core |
| MEM31925 | Certificate III in Engineering - Fabrication Trade | Qualification | ◆core |
| MEM40119 | Certificate IV in Engineering | Qualification | ◆core |
| MEM40222 | Certificate IV in Boating Services | Qualification | ◇elective |
| MEM40322 | Certificate IV in Advanced Jewellery Manufacture | Qualification | ◆core |
| MEM50119 | Diploma of Engineering - Advanced Trade | Qualification | ◆core |
| MEM50222 | Diploma of Engineering - Technical | Qualification | ◇elective |
| MEM50322 | Diploma of Jewellery and Object Design | Qualification | ◇elective |
| MEM50425 | Diploma of Engineering - Non-Destructive Testing | Qualification | ◇elective |
| MEM50522 | Diploma of Engineering - Materials | Qualification | ◇elective |
| MEM50622 | Diploma of Engineering - Prototyping | Qualification | ◇elective |
| MEM50722 | Diploma of Engineering - Planning | Qualification | ◇elective |
| MEM60122 | Advanced Diploma of Engineering | Qualification | ◇elective |
| MEM60222 | Advanced Diploma of Jewellery and Object Design | Qualification | ◇elective |
| MEM60322 | Advanced Diploma of Engineering - Planning | Qualification | ◇elective |
| MSM41122 | Certificate IV in Recreational Vehicles | Qualification | ◇elective |
| PMA30120 | Certificate III in Process Plant Operations | Qualification | ◇elective |
| PMB20121 | Certificate II in Polymer Processing | Qualification | ◇elective |
| PMB30121 | Certificate III in Polymer Processing | Qualification | ◇elective |
| PMB40121 | Certificate IV in Polymer Technology | Qualification | ◇elective |
| RII21222 | Certificate II in Autonomous Workplace Operations | Qualification | ◇elective |
| TLI29921 | Certificate II in Rolling Stock Maintenance | Qualification | ◇elective |
| TLISS00227 | Rolling Stock Maintenance (Mechanical) Skill Set | Skill set | ◆core |
| UEP20122 | Certificate II in ESI Generation - Operations Support | Qualification | ◇elective |
| UEP20222 | Certificate II in Remote Area Essential Service | Qualification | ◇elective |
| UEP30322 | Certificate III in ESI Generation | Qualification | ◇elective |
| UEP40122 | Certificate IV in ESI Generation | Qualification | ◇elective |
| UEP40422 | Certificate IV in ESI Generation Maintenance (Fabrication) | Qualification | ◇elective |
| UEP40522 | Certificate IV in ESI Generation Maintenance (Mechanical) | Qualification | ◇elective |
Products no longer current 16 listed
The register still records MEM11011 inside these, but it no longer recommends them as current. They are here because a scope history or an old enrolment can still point at them.
| Code | Training product | Type | MEM11011 is |
|---|---|---|---|
| AHC20320 | Certificate II in Production Horticulture | Qualification | ◇elective |
| AHC21621 | Certificate II in Landscaping | Qualification | ◇elective |
| AHC32422 | Certificate III in Irrigation Technology | Qualification | ◇elective |
| AUR32120 | Certificate III in Automotive Body Repair Technology | Qualification | ◇elective |
| CUA30420 | Certificate III in Live Production and Technical Services | Qualification | ◇elective |
| FWP20316 | Certificate II in Sawmilling and Processing | Qualification | ◇elective |
| FWP20416 | Certificate II in Wood Panel Products | Qualification | ◇elective |
| FWP30316 | Certificate III in Sawmilling and Processing | Qualification | ◇elective |
| FWP30416 | Certificate III in Wood Panel Products | Qualification | ◇elective |
| FWP31019 | Certificate III in Saw Technology | Qualification | ◇elective |
Show the remaining 6 products no longer current
| Code | Training product | Type | MEM11011 is |
|---|---|---|---|
| MEM30319 | Certificate III in Engineering - Fabrication Trade | Qualification | ◆core |
| MEM31319 | Certificate III in Refrigeration and Air Conditioning | Qualification | ◆core |
| MEM31922 | Certificate III in Engineering - Fabrication Trade | Qualification | ◆core |
| MEM50422 | Diploma of Engineering - Non-Destructive Testing | Qualification | ◇elective |
| MEMSS00002 | Non-Destructive Testing - Level 2 NDT practitioner | Skill set | ◇elective |
| UEP30122 | Certificate III in ESI Generation | Qualification | ◇elective |
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every MEM training product on the register · Search all training products
Deliver this? We read the register nightly — get the free breakdown of your whole scope, and hear the day MEM11011 or anything else on it is superseded.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.