Where the register points next
training.gov.au points at nothing after MEM31019: it is the current product, and no replacement is listed.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is MEM31019 on your scope?
This page is the register's record of one product. What it cannot tell you is whether MEM31019 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What MEM31019 is made of
training.gov.au lists 47 units for MEM31019: 12 core and 35 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 12 listed
| Code | Unit | In this product |
|---|---|---|
| MEM09002 | Interpret technical drawing | ●current |
| MEM11011 | Undertake manual handling | ●current |
| MEM12023 | Perform engineering measurements | ●current |
| MEM12024 | Perform computations | ●current |
| MEM13015 | Work safely and effectively in manufacturing and engineering | ●current |
| MEM14006 | Plan work activities | ●current |
| MEM16006 | Organise and communicate information | ●current |
| MEM16008 | Interact with computing technology | ●current |
| MEM17003 | Assist in the provision of on-the-job training | ●current |
| MEM18001 | Use hand tools | ●current |
| MEM18002 | Use power tools/hand held operations | ●current |
| MSMENV272 | Participate in environmentally sustainable work practices | ●current |
Elective units 35 listed
| Code | Unit | In this product |
|---|---|---|
| MEM05001 | Perform manual soldering/desoldering - electrical/electronic components | ●current |
| MEM06007 | Perform basic incidental heat/quenching, tempering and annealing | ●current |
| MEM07005 | Perform general machining | ●current |
| MEM12002 | Perform electrical/electronic measurement | ●current |
| MEM13001 | Perform emergency first aid | ●current |
| MEM13019 | Undertake work health and safety activities in the workplace | ●current |
| MEM15004 | Perform inspection | ●current |
| MEM16004 | Perform internal/external customer service | ●current |
| MEM16005 | Operate as a team member to conduct manufacturing, engineering or related activities | ●current |
| MEM16012 | Interpret technical specifications and manuals | ●current |
| MEM18003 | Use tools for precision work | ●current |
| MEM21001 | Replace watch batteries, capacitors and bands | ●current |
| MEM21002 | Perform watch movement exchange | ●current |
| MEM21003 | Perform watch case servicing, repair and refurbishment | ●current |
| MEM21004 | Clean watch and clock components | ●current |
| MEM21005 | Diagnose faults in quartz watches | ●current |
| MEM21006 | Service quartz watches | ●current |
| MEM21007 | Service complex quartz watches | ●current |
| MEM21008 | Service mechanical watches | ●current |
| MEM21009 | Inspect, diagnose, adjust and repair mechanical watches | ●current |
| MEM21010 | Service watch power generating systems | ●current |
| MEM21011 | Service calendar and other dial indication mechanisms for watches | ●current |
| MEM21012 | Service and repair mechanical watch oscillating systems | ●current |
| MEM21013 | Service, test and adjust watch escapements | ●current |
| MEM21014 | Service mechanical chronograph watches | ●current |
| MEM21015 | Perform precision watch timing and adjustment | ●current |
| MEM21016 | Install and set up clocks | ●current |
| MEM21017 | Service and repair clock timepieces | ●current |
| MEM21018 | Service clock escapements and oscillating systems | ●current |
| MEM21019 | Service and repair clock striking mechanisms | ●current |
Show the remaining 5 elective units
| Code | Unit | In this product |
|---|---|---|
| MEM21020 | Service and repair clock chiming mechanisms | ●current |
| MEM21021 | Restore clockwork mechanisms | ●current |
| MEM21022 | Manufacture watch and clock components | ●current |
| MEM21023 | Plan, set up and operate horological workshop or service centre | ●current |
| MEM30025 | Analyse a simple electrical system circuit | ●current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every MEM training product on the register · Search all training products
Deliver this? We read the register nightly — get the free breakdown of your whole scope, and hear the day MEM31019 or anything else on it is superseded.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.