Where the register points next
training.gov.au points at nothing after MEM30119: it is the current product, and no replacement is listed.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is MEM30119 on your scope?
This page is the register's record of one product. What it cannot tell you is whether MEM30119 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What MEM30119 is made of
training.gov.au lists 157 units for MEM30119: 12 core and 145 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 12 listed
| Code | Unit | In this product |
|---|---|---|
| MEM09002 | Interpret technical drawing | ●current |
| MEM11011 | Undertake manual handling | ●current |
| MEM12023 | Perform engineering measurements | ●current |
| MEM12024 | Perform computations | ●current |
| MEM13015 | Work safely and effectively in manufacturing and engineering | ●current |
| MEM14006 | Plan work activities | ●current |
| MEM16006 | Organise and communicate information | ●current |
| MEM16008 | Interact with computing technology | ●current |
| MEM17003 | Assist in the provision of on-the-job training | ●current |
| MEM18001 | Use hand tools | ●current |
| MEM18002 | Use power tools/hand held operations | ●current |
| MSMENV272 | Participate in environmentally sustainable work practices | ●current |
Elective units 145 listed
| Code | Unit | In this product |
|---|---|---|
| CPCCLDG3001 | Licence to perform dogging | ●current |
| CPCCLRG3001 | Licence to perform rigging basic level | ●current |
| CPCCLSF2001 | Licence to erect, alter and dismantle scaffolding basic level | ●current |
| CPCCLSF3001 | Licence to erect, alter and dismantle scaffolding intermediate level | ●current |
| MEM03001 | Perform manual production assembly | ●current |
| MEM03002 | Perform precision assembly | ●current |
| MEM03003 | Perform sheet and plate assembly | ●current |
| MEM03004 | Perform electronic/electrical assembly (production) | ●current |
| MEM03005 | Rework and repair (electrical/electronic production) | ●current |
| MEM03006 | Set assembly stations | ●current |
| MEM04001 | Operate melting furnaces | ●current |
| MEM04002 | Perform gravity die casting | ●current |
| MEM04003 | Operate pressure die casting machine | ●current |
| MEM04004 | Prepare and mix sand for metal moulding | ●current |
| MEM04006 | Operate sand moulding and core making machines | ●current |
| MEM04007 | Pour molten metal | ●current |
| MEM04008 | Fettle and trim metal castings/forgings | ●current |
| MEM04018 | Perform general woodworking machine operations | ●current |
| MEM04019 | Perform refractory installation and repair | ●current |
| MEM05001 | Perform manual soldering/desoldering - electrical/electronic components | ●current |
| MEM05002 | Perform high reliability soldering and desoldering | ●current |
| MEM05003 | Perform soft soldering | ●current |
| MEM05004 | Perform routine oxy fuel gas welding | ●current |
| MEM05005 | Carry out mechanical cutting | ●current |
| MEM05006 | Perform brazing and/or silver soldering | ●current |
| MEM05007 | Perform manual heating and thermal cutting | ●current |
| MEM05009 | Perform automated thermal cutting | ●current |
| MEM05012 | Perform routine manual metal arc welding | ●current |
| MEM05013 | Perform manual production welding | ●current |
| MEM05014 | Monitor quality of production welding/fabrications | ●current |
Show the remaining 115 elective units
| Code | Unit | In this product |
|---|---|---|
| MEM05027 | Perform aluminothermic welding | ●current |
| MEM05049 | Perform routine gas tungsten arc welding | ●current |
| MEM05050 | Perform routine gas metal arc welding | ●current |
| MEM05052 | Apply safe welding practices | ●current |
| MEM05085 | Select welding processes | ●current |
| MEM05086 | Set and edit computer controlled thermal cutting machines | ●current |
| MEM05095 | Weld using flame powder spraying | ●current |
| MEM05097 | Weld using oxy fuel gas welding process | ●current |
| MEM06003 | Carry out heat treatment | ●current |
| MEM06007 | Perform basic incidental heat/quenching, tempering and annealing | ●current |
| MEM06010 | Perform hand forging | ●current |
| MEM06013 | Repair springs | ●current |
| MEM07001 | Perform operational maintenance of machines/equipment | ●current |
| MEM07003 | Perform routine machine setting | ●current |
| MEM07004 | Perform complex machine setting | ●current |
| MEM07015 | Set computer controlled machines and processes | ●current |
| MEM07016 | Set and edit computer controlled machines and processes | ●current |
| MEM07024 | Operate and monitor machine and process | ●current |
| MEM07025 | Perform advanced machine and process operation | ●current |
| MEM07026 | Perform advanced plastic processing | ●current |
| MEM07027 | Perform advanced press operations | ●current |
| MEM07028 | Operate computer controlled machines and processes | ●current |
| MEM07029 | Perform routine sharpening and maintenance of production tools and cutters | ●current |
| MEM07030 | Perform basic metal spinning lathe operations | ●current |
| MEM07031 | Perform complex metal spinning lathe operations | ●current |
| MEM07032 | Use workshop machines for basic operations | ●current |
| MEM07033 | Operate and monitor basic boiler | ●current |
| MEM07040 | Set multistage integrated processes | ●current |
| MEM07041 | Perform production machining | ●current |
| MEM07042 | Undertake corrections and basic maintenance to aluminium extrusion dies and die support systems | ●current |
| MEM07043 | Identify causes of faulty aluminium extrusions | ●current |
| MEM07044 | Test a new aluminium extrusion die | ●current |
| MEM08001 | Perform wire, jig and barrel load/unload work | ●current |
| MEM08002 | Pre-treat work for subsequent surface coating | ●current |
| MEM08003 | Perform electroplating operations | ●current |
| MEM08004 | Finish work using wet, dry and vapour deposition methods | ●current |
| MEM08005 | Prepare and produce specialised coatings | ●current |
| MEM08006 | Produce clear and/or coloured and/or sealed anodised films on aluminium | ●current |
| MEM08007 | Control surface finish production and finished product quality | ●current |
| MEM08008 | Operate and control surface finishing waste treatment process | ●current |
| MEM08009 | Make up solutions | ●current |
| MEM08010 | Manually finish/polish materials | ●current |
| MEM08011 | Prepare surfaces using solvents and/or mechanical means | ●current |
| MEM08012 | Prepare surfaces by abrasive blasting (basic) | ●current |
| MEM08013 | Prepare surfaces by abrasive blasting (advanced) | ●current |
| MEM08014 | Apply protective coatings (basic) | ●current |
| MEM08015 | Apply protective coatings (advanced) | ●current |
| MEM08016 | Control blast coating by-products, materials and emissions | ●current |
| MEM08018 | Electroplate engineering coatings | ●current |
| MEM08019 | Electroplate protective finishes | ●current |
| MEM08020 | Electroplate decorative finishes | ●current |
| MEM10002 | Terminate and connect electrical wiring | ●current |
| MEM10004 | Enter and change programmable controller operational parameters | ●current |
| MEM10011 | Terminate and connect specialist cables | ●current |
| MEM10013 | Install split air conditioning systems and associated pipework | ●current |
| MEM11001 | Erect/dismantle scaffolding and equipment | ●current |
| MEM11002 | Erect/dismantle intermediate scaffolding and equipment | ●current |
| MEM11003 | Coordinate erection/dismantling of complex scaffolding/equipment | ●current |
| MEM11004 | Undertake dogging | ●current |
| MEM11005 | Pick and process order | ●current |
| MEM11006 | Perform production packaging | ●current |
| MEM11007 | Administer inventory procedures | ●current |
| MEM11008 | Package materials (stores and warehouse) | ●current |
| MEM11009 | Handle/move bulk fluids/gases | ●current |
| MEM11010 | Operate mobile load shifting equipment | ●current |
| MEM11012 | Purchase materials | ●current |
| MEM11013 | Undertake warehouse receival process | ●current |
| MEM11014 | Undertake warehouse dispatch process | ●current |
| MEM11015 | Manage warehouse inventory system | ●current |
| MEM11016 | Order materials | ●current |
| MEM11017 | Organise and lead stocktakes | ●current |
| MEM11018 | Organise and maintain warehouse stock receival and dispatch system | ●current |
| MEM11019 | Undertake tool store procedures | ●current |
| MEM11020 | Perform advanced warehouse computer operations | ●current |
| MEM11021 | Perform advanced operation of load shifting equipment | ●current |
| MEM11022 | Operate fixed/moveable load shifting equipment | ●current |
| MEM11023 | Operate a bridge and gantry crane | ●current |
| MEM11024 | Undertake basic rigging | ●current |
| MEM11025 | Operate a non-slewing mobile crane of greater than three tonnes capacity | ●current |
| MEM12001 | Use comparison and basic measuring devices | ●current |
| MEM12002 | Perform electrical/electronic measurement | ●current |
| MEM12019 | Measure components using coordinate measuring machines | ●current |
| MEM12020 | Set and operate coordinate measuring machines | ●current |
| MEM12025 | Use graphical techniques and perform simple statistical computations | ●current |
| MEM13001 | Perform emergency first aid | ●current |
| MEM13003 | Work safely with industrial chemicals and materials | ●current |
| MEM13004 | Work safely with molten metals/glass | ●current |
| MEM13018 | Work safely with ionizing radiation | ●current |
| MEM13019 | Undertake work health and safety activities in the workplace | ●current |
| MEM15001 | Perform basic statistical quality control | ●current |
| MEM15003 | Use improvement processes in team activities | ●current |
| MEM15004 | Perform inspection | ●current |
| MEM15005 | Select and control inspection processes and procedures | ●current |
| MEM16004 | Perform internal/external customer service | ●current |
| MEM16005 | Operate as a team member to conduct manufacturing, engineering or related activities | ●current |
| MEM18003 | Use tools for precision work | ●current |
| MEM18055 | Dismantle, replace and assemble engineering components | ●current |
| MEM18063 | Terminate signal and data cables | ●current |
| MEM18071 | Connect and disconnect fluid conveying system components | ●current |
| MEM18072 | Manufacture fluid conveying conductor assemblies | ●current |
| MEM18083 | Handle fluorocarbon refrigerants according to regulations | ●current |
| MEM18084 | Commission and decommission split air conditioning systems | ●current |
| MEM18086 | Test, recover, evacuate and charge refrigeration systems | ●current |
| MEM18098 | Prepare to perform work associated with fuel system installation and servicing | ●current |
| MEM18110 | Perform basic penetrant testing | ●current |
| MEM18111 | Perform basic magnetic particle testing | ●current |
| MSMENV472 | Implement and monitor environmentally sustainable work practices | ●current |
| PMBPROD391E | Produce composites using resin infusion | ●current |
| PMBPROD394E | Produce composites using resin transfer moulding | ●current |
| PMBPROD398E | Produce composites using prepregs | ●current |
| TLILIC0003 | Licence to operate a forklift truck | ●current |
| TLILIC0004 | Licence to operate an order picking forklift truck | ●current |
| TLILIC0016 | Licence to operate a bridge and gantry crane | ●current |
| TLILIC0024 | Licence to operate a vehicle loading crane (capacity 10 metre tonnes and above) | ●current |
| TLILIC0040 | Licence to operate a non-slewing mobile crane (greater than 3 tonnes capacity) | ●current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every MEM training product on the register · Search all training products
Deliver this? We read the register nightly — get the free breakdown of your whole scope, and hear the day MEM30119 or anything else on it is superseded.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.