Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is MEM31922 on your scope?
This page is the register's record of one product. What it cannot tell you is whether MEM31922 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What MEM31922 is made of
training.gov.au lists 113 units for MEM31922: 12 core and 101 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 12 listed
| Code | Unit | In this product |
|---|---|---|
| MEM09002 | Interpret technical drawing | ●current |
| MEM11011 | Undertake manual handling | ●current |
| MEM12023 | Perform engineering measurements | ●current |
| MEM12024 | Perform computations | ●current |
| MEM13015 | Work safely and effectively in manufacturing and engineering | ●current |
| MEM14006 | Plan work activities | ●current |
| MEM16006 | Organise and communicate information | ●current |
| MEM16008 | Interact with computing technology | ●current |
| MEM17003 | Assist in the provision of on-the-job training | ●current |
| MEM18001 | Use hand tools | ●current |
| MEM18002 | Use power tools/hand held operations | ●current |
| MSMENV272 | Participate in environmentally sustainable work practices | ●current |
Elective units 101 listed
| Code | Unit | In this product |
|---|---|---|
| MEM05001 | Perform manual soldering/desoldering - electrical/electronic components | ●current |
| MEM05002 | Perform high reliability soldering and desoldering | ●current |
| MEM05003 | Perform soft soldering | ●current |
| MEM05004 | Perform routine oxy fuel gas welding | ●current |
| MEM05005 | Carry out mechanical cutting | ●current |
| MEM05006 | Perform brazing and/or silver soldering | ●current |
| MEM05007 | Perform manual heating and thermal cutting | ●current |
| MEM05009 | Perform automated thermal cutting | ●current |
| MEM05010 | Apply fabrication, forming and shaping techniques | ●current |
| MEM05012 | Perform routine manual metal arc welding | ●current |
| MEM05014 | Monitor quality of production welding/fabrications | ●current |
| MEM05027 | Perform aluminothermic welding | ●current |
| MEM05037 | Perform geometric development | ●current |
| MEM05049 | Perform routine gas tungsten arc welding | ●current |
| MEM05050 | Perform routine gas metal arc welding | ●current |
| MEM05052 | Apply safe welding practices | ●current |
| MEM05056 | Perform routine flux core arc welding | ●current |
| MEM05057 | Perform routine submerged arc welding | ●current |
| MEM05059 | Perform advanced welding using submerged arc welding | ●current |
| MEM05065 | Maintain weld records | ●current |
| MEM05071 | Perform advanced manual thermal cutting, gouging and shaping | ●current |
| MEM05072 | Perform advanced welding using manual metal arc welding process | ●current |
| MEM05073 | Perform advanced welding using gas metal arc welding process | ●current |
| MEM05074 | Perform advanced welding using gas tungsten arc welding process | ●current |
| MEM05075 | Perform advanced welding using oxy acetylene welding process | ●current |
| MEM05084 | Perform advanced welding using flux core arc welding process | ●current |
| MEM05085 | Select welding processes | ●current |
| MEM05086 | Set and edit computer controlled thermal cutting machines | ●current |
| MEM05089 | Assemble fabricated components | ●current |
| MEM05090 | Weld using manual metal arc welding process | ●current |
Show the remaining 71 elective units
| Code | Unit | In this product |
|---|---|---|
| MEM05091 | Weld using gas metal arc welding process | ●current |
| MEM05092 | Weld using gas tungsten arc welding process | ●current |
| MEM05093 | Weld using submerged arc welding process | ●current |
| MEM05094 | Repair, replace and/or modify fabrications | ●current |
| MEM05095 | Weld using flame powder spraying | ●current |
| MEM05096 | Weld using flux core arc welding process | ●current |
| MEM05097 | Weld using oxy fuel gas welding process | ●current |
| MEM06001 | Perform hand forging | !not current |
| MEM06002 | Perform hammer forging | !not current |
| MEM06003 | Carry out heat treatment | ●current |
| MEM06004 | Select heat treatment processes and test finished product | ●current |
| MEM06005 | Perform drop and upset forging | !not current |
| MEM06006 | Repair springs | !not current |
| MEM06007 | Perform basic incidental heat/quenching, tempering and annealing | ●current |
| MEM06008 | Hammer forge complex shapes | !not current |
| MEM06009 | Hand forge complex shapes | !not current |
| MEM07001 | Perform operational maintenance of machines/equipment | ●current |
| MEM07015 | Set computer controlled machines and processes | ●current |
| MEM07016 | Set and edit computer controlled machines and processes | ●current |
| MEM07024 | Operate and monitor machine and process | ●current |
| MEM07028 | Operate computer controlled machines and processes | ●current |
| MEM07030 | Perform basic metal spinning lathe operations | ●current |
| MEM07031 | Perform complex metal spinning lathe operations | ●current |
| MEM07032 | Use workshop machines for basic operations | ●current |
| MEM08001 | Perform wire, jig and barrel load/unload work | ●current |
| MEM08002 | Pre-treat work for subsequent surface coating | ●current |
| MEM08003 | Perform electroplating operations | ●current |
| MEM08004 | Finish work using wet, dry and vapour deposition methods | ●current |
| MEM08005 | Prepare and produce specialised coatings | ●current |
| MEM08006 | Produce clear and/or coloured and/or sealed anodised films on aluminium | ●current |
| MEM08007 | Control surface finish production and finished product quality | ●current |
| MEM08008 | Operate and control surface finishing waste treatment process | ●current |
| MEM08009 | Make up solutions | ●current |
| MEM08010 | Manually finish/polish materials | ●current |
| MEM08011 | Prepare surfaces using solvents and/or mechanical means | ●current |
| MEM08012 | Prepare surfaces by abrasive blasting (basic) | ●current |
| MEM08013 | Prepare surfaces by abrasive blasting (advanced) | ●current |
| MEM08014 | Apply protective coatings (basic) | ●current |
| MEM08015 | Apply protective coatings (advanced) | ●current |
| MEM08016 | Control blast coating by-products, materials and emissions | ●current |
| MEM08018 | Electroplate engineering coatings | ●current |
| MEM08019 | Electroplate protective finishes | ●current |
| MEM08020 | Electroplate decorative finishes | ●current |
| MEM09003 | Prepare basic engineering drawing | ●current |
| MEM09011 | Apply basic engineering design concepts | ●current |
| MEM10010 | Install pipework and pipework assemblies | ●current |
| MEM10012 | Erect structures | ●current |
| MEM11001 | Erect/dismantle scaffolding and equipment | ●current |
| MEM11009 | Handle/move bulk fluids/gases | ●current |
| MEM11010 | Operate mobile load shifting equipment | ●current |
| MEM11016 | Order materials | ●current |
| MEM11022 | Operate fixed/moveable load shifting equipment | ●current |
| MEM12007 | Mark off/out structural fabrications and shapes | ●current |
| MEM12025 | Use graphical techniques and perform simple statistical computations | ●current |
| MEM13001 | Perform emergency first aid | ●current |
| MEM13003 | Work safely with industrial chemicals and materials | ●current |
| MEM13019 | Undertake work health and safety activities in the workplace | ●current |
| MEM15001 | Perform basic statistical quality control | ●current |
| MEM15003 | Use improvement processes in team activities | ●current |
| MEM15004 | Perform inspection | ●current |
| MEM16004 | Perform internal/external customer service | ●current |
| MEM16005 | Operate as a team member to conduct manufacturing, engineering or related activities | ●current |
| MEM18003 | Use tools for precision work | ●current |
| MEM18011 | Shut down and isolate machines/equipment | ●current |
| MEM18055 | Dismantle, replace and assemble engineering components | ●current |
| MEM24001 | Perform basic penetrant testing | !not current |
| MEM24003 | Perform basic magnetic particle testing | !not current |
| MEM24007 | Perform ultrasonic thickness testing | !not current |
| MSMENV472 | Implement and monitor environmentally sustainable work practices | ●current |
| TLILIC0003 | Licence to operate a forklift truck | ●current |
| TLILIC0024 | Licence to operate a vehicle loading crane (capacity 10 metre tonnes and above) | ●current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every MEM training product on the register · Search all training products
Is MEM31922 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.