Where the register points next
training.gov.au points at nothing after MEM40119: it is the current product, and no replacement is listed.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is MEM40119 on your scope?
This page is the register's record of one product. What it cannot tell you is whether MEM40119 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What MEM40119 is made of
training.gov.au lists 471 units for MEM40119: 12 core and 459 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 12 listed
| Code | Unit | In this product |
|---|---|---|
| MEM09002 | Interpret technical drawing | ●current |
| MEM11011 | Undertake manual handling | ●current |
| MEM12023 | Perform engineering measurements | ●current |
| MEM12024 | Perform computations | ●current |
| MEM13015 | Work safely and effectively in manufacturing and engineering | ●current |
| MEM14006 | Plan work activities | ●current |
| MEM16006 | Organise and communicate information | ●current |
| MEM16008 | Interact with computing technology | ●current |
| MEM17003 | Assist in the provision of on-the-job training | ●current |
| MEM18001 | Use hand tools | ●current |
| MEM18002 | Use power tools/hand held operations | ●current |
| MSMENV272 | Participate in environmentally sustainable work practices | ●current |
Elective units 459 listed
| Code | Unit | In this product |
|---|---|---|
| CPPFES2027 | Inspect, test and maintain non-gaseous pre-engineered fire-suppression systems | ●current |
| CPPFES3042 | Install and commission pre-engineered fire-suppression systems | ●current |
| CPPSEC2021 | Install security equipment and systems | ●current |
| CPPSEC3036 | Program and configure security equipment and systems | ●current |
| CPPSEC3037 | Test installed security equipment and systems | ●current |
| CPPSEC3038 | Commission and decommission security equipment and systems | ●current |
| CPPSEC3039 | Diagnose faults in electronic security equipment and systems | ●current |
| CPPSEC3041 | Conduct routine service of security equipment and systems | ●current |
| CPPSEC3047 | Provide estimate and quote on security system installations | ●current |
| MEM03001 | Perform manual production assembly | ●current |
| MEM03002 | Perform precision assembly | ●current |
| MEM03003 | Perform sheet and plate assembly | ●current |
| MEM03004 | Perform electronic/electrical assembly (production) | ●current |
| MEM03005 | Rework and repair (electrical/electronic production) | ●current |
| MEM03006 | Set assembly stations | ●current |
| MEM04001 | Operate melting furnaces | ●current |
| MEM04002 | Perform gravity die casting | ●current |
| MEM04003 | Operate pressure die casting machine | ●current |
| MEM04004 | Prepare and mix sand for metal moulding | ●current |
| MEM04006 | Operate sand moulding and core making machines | ●current |
| MEM04007 | Pour molten metal | ●current |
| MEM04008 | Fettle and trim metal castings/forgings | ●current |
| MEM04018 | Perform general woodworking machine operations | ●current |
| MEM04019 | Perform refractory installation and repair | ●current |
| MEM04020 | Supervise individual ferrous melting and casting operation | ●current |
| MEM04021 | Supervise individual non-ferrous melting and casting operation | ●current |
| MEM04022 | Examine appropriateness of methoding for mould design | ●current |
| MEM04023 | Undertake prescribed tests on foundry-related materials | ●current |
| MEM04024 | Produce moulds and cores by hand | ●current |
| MEM04025 | Produce moulds and cores by hand (advanced) | ●current |
Show the remaining 429 elective units
| Code | Unit | In this product |
|---|---|---|
| MEM04026 | Develop and manufacture spur gear patterns | ●current |
| MEM04027 | Develop and manufacture bevel gear patterns | ●current |
| MEM04028 | Develop and manufacture chain gear and sprocket patterns | ●current |
| MEM04029 | Develop and manufacture conveyor screw patterns | ●current |
| MEM04030 | Develop and manufacture propeller patterns | ●current |
| MEM04031 | Develop and manufacture flat back wood patterns | ●current |
| MEM04032 | Develop and manufacture irregular joint wood patterns | ●current |
| MEM04033 | Develop and manufacture turned wood patterns | ●current |
| MEM04034 | Develop and manufacture wooden wheel patterns | ●current |
| MEM04035 | Develop and manufacture pipe patterns | ●current |
| MEM04037 | Develop and manufacture split patterns | ●current |
| MEM04038 | Produce polymer patterns | ●current |
| MEM04039 | Assemble plated patterns | ●current |
| MEM04040 | Develop and manufacture polystyrene patterns | ●current |
| MEM04041 | Develop and manufacture production patterns | ●current |
| MEM04042 | Develop and manufacture vacuum forming moulds and associated equipment | ●current |
| MEM04043 | Develop and manufacture precision models | ●current |
| MEM05001 | Perform manual soldering/desoldering - electrical/electronic components | ●current |
| MEM05002 | Perform high reliability soldering and desoldering | ●current |
| MEM05003 | Perform soft soldering | ●current |
| MEM05004 | Perform routine oxy fuel gas welding | ●current |
| MEM05005 | Carry out mechanical cutting | ●current |
| MEM05006 | Perform brazing and/or silver soldering | ●current |
| MEM05007 | Perform manual heating and thermal cutting | ●current |
| MEM05009 | Perform automated thermal cutting | ●current |
| MEM05010 | Apply fabrication, forming and shaping techniques | ●current |
| MEM05012 | Perform routine manual metal arc welding | ●current |
| MEM05013 | Perform manual production welding | ●current |
| MEM05014 | Monitor quality of production welding/fabrications | ●current |
| MEM05037 | Perform geometric development | ●current |
| MEM05038 | Perform advanced geometric development - cylindrical/rectangular | ●current |
| MEM05039 | Perform advanced geometric development - conical | ●current |
| MEM05040 | Perform advanced geometric development - transitions | ●current |
| MEM05049 | Perform routine gas tungsten arc welding | ●current |
| MEM05050 | Perform routine gas metal arc welding | ●current |
| MEM05052 | Apply safe welding practices | ●current |
| MEM05056 | Perform routine flux core arc welding | ●current |
| MEM05057 | Perform routine submerged arc welding | ●current |
| MEM05060 | Perform welds to code standards using submerged arc welding process | ●current |
| MEM05061 | Apply basic metallurgy principles to welding applications | ●current |
| MEM05062 | Apply welding and welding related codes and standards | ●current |
| MEM05063 | Write and proof robotic welding system programs | ●current |
| MEM05064 | Establish and maintain a weld record management system | ●current |
| MEM05065 | Maintain weld records | ●current |
| MEM05066 | Develop and maintain welding procedures | ●current |
| MEM05067 | Establish and maintain a welding procedure management system | ●current |
| MEM05068 | Apply welding procedure specifications | ●current |
| MEM05069 | Undertake advanced weld repair and maintenance | ●current |
| MEM05070 | Write and proof programs for NC/CNC thermal cutting machines | ●current |
| MEM05071 | Perform advanced manual thermal cutting, gouging and shaping | ●current |
| MEM05072 | Perform advanced welding using manual metal arc welding process | ●current |
| MEM05073 | Perform advanced welding using gas metal arc welding process | ●current |
| MEM05074 | Perform advanced welding using gas tungsten arc welding process | ●current |
| MEM05075 | Perform advanced welding using oxy acetylene welding process | ●current |
| MEM05076 | Perform welding supervision | ●current |
| MEM05077 | Perform welding inspection | ●current |
| MEM05078 | Apply welding principles | ●current |
| MEM05079 | Perform welds to code standards using flux core arc welding process | ●current |
| MEM05080 | Perform welds to code standards using gas metal arc welding process | ●current |
| MEM05081 | Perform welds to code standards using gas tungsten arc welding process | ●current |
| MEM05082 | Perform pipe welds to code standards using manual metal arc welding process | ●current |
| MEM05083 | Perform welds to code standards using manual metal arc welding process | ●current |
| MEM05084 | Perform advanced welding using flux core arc welding process | ●current |
| MEM05085 | Select welding processes | ●current |
| MEM05086 | Set and edit computer controlled thermal cutting machines | ●current |
| MEM05087 | Write basic NC/CNC programs for thermal cutting machines | ●current |
| MEM05088 | Perform welds to code standards using oxy fuel gas welding process | ●current |
| MEM05089 | Assemble fabricated components | ●current |
| MEM05090 | Weld using manual metal arc welding process | ●current |
| MEM05091 | Weld using gas metal arc welding process | ●current |
| MEM05092 | Weld using gas tungsten arc welding process | ●current |
| MEM05093 | Weld using submerged arc welding process | ●current |
| MEM05094 | Repair, replace and/or modify fabrications | ●current |
| MEM05095 | Weld using flame powder spraying | ●current |
| MEM05096 | Weld using flux core arc welding process | ●current |
| MEM05097 | Weld using oxy fuel gas welding process | ●current |
| MEM06003 | Carry out heat treatment | ●current |
| MEM06004 | Select heat treatment processes and test finished product | ●current |
| MEM06007 | Perform basic incidental heat/quenching, tempering and annealing | ●current |
| MEM06010 | Perform hand forging | ●current |
| MEM06011 | Perform power hammer forging | ●current |
| MEM06012 | Perform drop and upset forging | ●current |
| MEM06013 | Repair springs | ●current |
| MEM06014 | Perform power hammer forging of complex shapes | ●current |
| MEM06015 | Hand forge complex shapes | ●current |
| MEM06016 | Perform press forging | ●current |
| MEM06017 | Perform press forging of complex shapes | ●current |
| MEM07001 | Perform operational maintenance of machines/equipment | ●current |
| MEM07002 | Perform precision shaping/planing/slotting operations | ●current |
| MEM07003 | Perform routine machine setting | ●current |
| MEM07004 | Perform complex machine setting | ●current |
| MEM07005 | Perform general machining | ●current |
| MEM07006 | Perform lathe operations | ●current |
| MEM07007 | Perform milling operations | ●current |
| MEM07008 | Perform grinding operations | ●current |
| MEM07009 | Perform precision jig boring operations | ●current |
| MEM07010 | Perform tool and cutter grinding operations | ●current |
| MEM07011 | Perform complex milling operations | ●current |
| MEM07012 | Perform complex grinding operations | ●current |
| MEM07013 | Perform machining operations using horizontal and vertical boring machines | ●current |
| MEM07014 | Perform electro-discharge machining (EDM) operations | ●current |
| MEM07015 | Set computer controlled machines and processes | ●current |
| MEM07016 | Set and edit computer controlled machines and processes | ●current |
| MEM07018 | Write basic NC and CNC programs | ●current |
| MEM07019 | Program NC and CNC machining centre | ●current |
| MEM07020 | Program multiple spindle and multiple axis NC and CNC machining centre | ●current |
| MEM07021 | Perform complex lathe operations | ●current |
| MEM07022 | Program CNC wire cut machines | ●current |
| MEM07023 | Program and set up CNC manufacturing cell | ●current |
| MEM07024 | Operate and monitor machine and process | ●current |
| MEM07025 | Perform advanced machine and process operation | ●current |
| MEM07026 | Perform advanced plastic processing | ●current |
| MEM07027 | Perform advanced press operations | ●current |
| MEM07028 | Operate computer controlled machines and processes | ●current |
| MEM07029 | Perform routine sharpening and maintenance of production tools and cutters | ●current |
| MEM07030 | Perform basic metal spinning lathe operations | ●current |
| MEM07031 | Perform complex metal spinning lathe operations | ●current |
| MEM07032 | Use workshop machines for basic operations | ●current |
| MEM07033 | Operate and monitor basic boiler | ●current |
| MEM07039 | Write programs for industrial robots | ●current |
| MEM07040 | Set multistage integrated processes | ●current |
| MEM07041 | Perform production machining | ●current |
| MEM08001 | Perform wire, jig and barrel load/unload work | ●current |
| MEM08002 | Pre-treat work for subsequent surface coating | ●current |
| MEM08003 | Perform electroplating operations | ●current |
| MEM08004 | Finish work using wet, dry and vapour deposition methods | ●current |
| MEM08005 | Prepare and produce specialised coatings | ●current |
| MEM08006 | Produce clear and/or coloured and/or sealed anodised films on aluminium | ●current |
| MEM08007 | Control surface finish production and finished product quality | ●current |
| MEM08008 | Operate and control surface finishing waste treatment process | ●current |
| MEM08009 | Make up solutions | ●current |
| MEM08010 | Manually finish/polish materials | ●current |
| MEM08011 | Prepare surfaces using solvents and/or mechanical means | ●current |
| MEM08012 | Prepare surfaces by abrasive blasting (basic) | ●current |
| MEM08013 | Prepare surfaces by abrasive blasting (advanced) | ●current |
| MEM08014 | Apply protective coatings (basic) | ●current |
| MEM08015 | Apply protective coatings (advanced) | ●current |
| MEM08016 | Control blast coating by-products, materials and emissions | ●current |
| MEM08018 | Electroplate engineering coatings | ●current |
| MEM08019 | Electroplate protective finishes | ●current |
| MEM08020 | Electroplate decorative finishes | ●current |
| MEM09003 | Prepare basic engineering drawing | ●current |
| MEM09004 | Perform electrical or electronic detail drafting | ●current |
| MEM09005 | Perform basic engineering detail drafting | ●current |
| MEM09006 | Perform advanced engineering detail drafting | ●current |
| MEM09007 | Perform advanced mechanical detail drafting | ●current |
| MEM09008 | Perform advanced structural detail drafting | ●current |
| MEM09009 | Create 2-D drawings using computer-aided design system | ●current |
| MEM09010 | Create 3-D models using computer-aided design system | ●current |
| MEM09011 | Apply basic engineering design concepts | ●current |
| MEM09021 | Interpret and produce drawings of curved 3-D shapes | ●current |
| MEM09022 | Create 2-D code files using computer-aided manufacturing system | ●current |
| MEM09023 | Create 3-D code files using computer-aided manufacturing system | ●current |
| MEM10002 | Terminate and connect electrical wiring | ●current |
| MEM10003 | Install and test electrical wiring and circuits up to 1000 volts a.c. and 1500 volts d.c. | ●current |
| MEM10004 | Enter and change programmable controller operational parameters | ●current |
| MEM10005 | Commission programmable controller programs | ●current |
| MEM10006 | Install machine/plant | ●current |
| MEM10007 | Modify control systems | ●current |
| MEM10008 | Undertake commissioning procedures for plant and/or equipment | ●current |
| MEM10009 | Install refrigeration and air conditioning plant and equipment | ●current |
| MEM10010 | Install pipework and pipework assemblies | ●current |
| MEM10011 | Terminate and connect specialist cables | ●current |
| MEM10012 | Erect structures | ●current |
| MEM10013 | Install split air conditioning systems and associated pipework | ●current |
| MEM11001 | Erect/dismantle scaffolding and equipment | ●current |
| MEM11002 | Erect/dismantle intermediate scaffolding and equipment | ●current |
| MEM11003 | Coordinate erection/dismantling of complex scaffolding/equipment | ●current |
| MEM11004 | Undertake dogging | ●current |
| MEM11005 | Pick and process order | ●current |
| MEM11006 | Perform production packaging | ●current |
| MEM11007 | Administer inventory procedures | ●current |
| MEM11008 | Package materials (stores and warehouse) | ●current |
| MEM11009 | Handle/move bulk fluids/gases | ●current |
| MEM11010 | Operate mobile load shifting equipment | ●current |
| MEM11012 | Purchase materials | ●current |
| MEM11013 | Undertake warehouse receival process | ●current |
| MEM11014 | Undertake warehouse dispatch process | ●current |
| MEM11015 | Manage warehouse inventory system | ●current |
| MEM11016 | Order materials | ●current |
| MEM11017 | Organise and lead stocktakes | ●current |
| MEM11018 | Organise and maintain warehouse stock receival and dispatch system | ●current |
| MEM11019 | Undertake tool store procedures | ●current |
| MEM11020 | Perform advanced warehouse computer operations | ●current |
| MEM11021 | Perform advanced operation of load shifting equipment | ●current |
| MEM11022 | Operate fixed/moveable load shifting equipment | ●current |
| MEM12001 | Use comparison and basic measuring devices | ●current |
| MEM12002 | Perform electrical/electronic measurement | ●current |
| MEM12003 | Perform precision mechanical measurement | ●current |
| MEM12004 | Perform precision electrical/electronic measurement | ●current |
| MEM12005 | Calibrate measuring equipment | ●current |
| MEM12006 | Mark off/out (general engineering) | ●current |
| MEM12007 | Mark off/out structural fabrications and shapes | ●current |
| MEM12019 | Measure components using coordinate measuring machines | ●current |
| MEM12020 | Set and operate coordinate measuring machines | ●current |
| MEM12021 | Program coordinate measuring machines | ●current |
| MEM12022 | Program coordinate measuring machines (advanced) | ●current |
| MEM12025 | Use graphical techniques and perform simple statistical computations | ●current |
| MEM12026 | Perform advanced trade calculations in a manufacturing, engineering or related environment | ●current |
| MEM13001 | Perform emergency first aid | ●current |
| MEM13003 | Work safely with industrial chemicals and materials | ●current |
| MEM13004 | Work safely with molten metals/glass | ●current |
| MEM13006 | Collect and evaluate work health and safety data for an enterprise or section of an enterprise | ●current |
| MEM13007 | Maintain water treatment systems for cooling towers | ●current |
| MEM13018 | Work safely with ionizing radiation | ●current |
| MEM13019 | Undertake work health and safety activities in the workplace | ●current |
| MEM13020 | Supervise work health and safety in an industrial work environment | ●current |
| MEM14001 | Schedule material deliveries | ●current |
| MEM14002 | Undertake basic process planning | ●current |
| MEM14003 | Undertake production scheduling | ●current |
| MEM15001 | Perform basic statistical quality control | ●current |
| MEM15003 | Use improvement processes in team activities | ●current |
| MEM15004 | Perform inspection | ●current |
| MEM15005 | Select and control inspection processes and procedures | ●current |
| MEM15007 | Conduct product and/or process capability studies | ●current |
| MEM15008 | Perform advanced statistical quality control | ●current |
| MEM15010 | Perform laboratory procedures | ●current |
| MEM15011 | Exercise external quality assurance | ●current |
| MEM15012 | Maintain/supervise the application of quality procedures | ●current |
| MEM15015 | Examine trading practices | ●current |
| MEM15016 | Inspect pre-packed articles | ●current |
| MEM15017 | Use and maintain reference standards | ●current |
| MEM15018 | Investigate consumer complaints | ●current |
| MEM15019 | Conduct a field inspection | ●current |
| MEM15020 | Perform inspection of measuring instruments | ●current |
| MEM15021 | Conduct audits of servicing licensees and public weighbridge licensees | ●current |
| MEM15022 | Verify reference standards | ●current |
| MEM16001 | Give formal presentations and take part in meetings | ●current |
| MEM16002 | Conduct formal interviews and negotiations | ●current |
| MEM16003 | Provide advanced customer service | ●current |
| MEM16004 | Perform internal/external customer service | ●current |
| MEM16005 | Operate as a team member to conduct manufacturing, engineering or related activities | ●current |
| MEM16009 | Research and analyse engineering information | ●current |
| MEM16010 | Write reports | ●current |
| MEM16011 | Communicate with individuals and small groups | ●current |
| MEM16012 | Interpret technical specifications and manuals | ●current |
| MEM16013 | Operate in a self-directed team | ●current |
| MEM16014 | Report technical information | ●current |
| MEM17001 | Assist in development and deliver training in the workplace | ●current |
| MEM17002 | Conduct workplace assessment | ●current |
| MEM18003 | Use tools for precision work | ●current |
| MEM18004 | Maintain and overhaul mechanical equipment | ●current |
| MEM18005 | Perform fault diagnosis, installation and removal of bearings | ●current |
| MEM18006 | Perform precision fitting of engineering components | ●current |
| MEM18007 | Maintain and repair mechanical drives and mechanical transmission assemblies | ●current |
| MEM18008 | Balance equipment | ●current |
| MEM18009 | Perform precision levelling and alignment of machines and engineering components | ●current |
| MEM18010 | Perform equipment condition monitoring and recording | ●current |
| MEM18011 | Shut down and isolate machines/equipment | ●current |
| MEM18012 | Perform installation and removal of mechanical seals | ●current |
| MEM18013 | Perform gland packing | ●current |
| MEM18014 | Manufacture press tools and gauges | ●current |
| MEM18015 | Maintain tools and dies | ●current |
| MEM18016 | Analyse plant and equipment condition monitoring results | ●current |
| MEM18017 | Modify mechanical systems and equipment | ●current |
| MEM18018 | Maintain pneumatic system components | ●current |
| MEM18019 | Maintain pneumatic systems | ●current |
| MEM18020 | Maintain hydraulic system components | ●current |
| MEM18021 | Maintain hydraulic systems | ●current |
| MEM18022 | Maintain fluid power controls | ●current |
| MEM18023 | Modify fluid power system operation | ●current |
| MEM18045 | Fault find and repair electrical equipment/components up to 250 volts single phase supply | ●current |
| MEM18046 | Fault find and repair electrical equipment/components up to 1000 volts a.c./1500 volts d.c. | ●current |
| MEM18048 | Fault find and repair/rectify basic electrical circuits | ●current |
| MEM18049 | Disconnect/reconnect fixed wired equipment up to 1000 volts a.c./1500 volts d.c. | ●current |
| MEM18050 | Disconnect/reconnect fixed wired equipment over 1000 volts a.c./1500 volts d.c. | ●current |
| MEM18051 | Fault find and repair/rectify complex electrical circuits | ●current |
| MEM18053 | Modify fluid power control systems | ●current |
| MEM18054 | Fault find, test and calibrate instrumentation systems and equipment | ●current |
| MEM18055 | Dismantle, replace and assemble engineering components | ●current |
| MEM18056 | Diagnose and repair analog equipment and components | ●current |
| MEM18057 | Maintain/service analog/digital electronic equipment | ●current |
| MEM18058 | Modify electronic equipment | ●current |
| MEM18059 | Modify electronic systems | ●current |
| MEM18060 | Maintain, repair control instrumentation - single and multiple loop control systems | ●current |
| MEM18061 | Maintain/calibrate complex control systems | ●current |
| MEM18062 | Install, maintain and calibrate instrumentation sensors, transmitters and final control elements | ●current |
| MEM18063 | Terminate signal and data cables | ●current |
| MEM18064 | Maintain instrumentation system components | ●current |
| MEM18065 | Diagnose and repair digital equipment and components | ●current |
| MEM18066 | Diagnose and repair microprocessor-based equipment | ●current |
| MEM18067 | Tune control loops - multi controller or multi element systems | ●current |
| MEM18069 | Maintain, repair instrumentation process control analysers | ●current |
| MEM18070 | Modify complex electrical circuits and systems | ●current |
| MEM18071 | Connect and disconnect fluid conveying system components | ●current |
| MEM18072 | Manufacture fluid conveying conductor assemblies | ●current |
| MEM18083 | Handle fluorocarbon refrigerants according to regulations | ●current |
| MEM18084 | Commission and decommission split air conditioning systems | ●current |
| MEM18085 | Install, service and repair domestic air conditioning and refrigeration appliances | ●current |
| MEM18086 | Test, recover, evacuate and charge refrigeration systems | ●current |
| MEM18087 | Service and repair domestic and light commercial refrigeration and air conditioning equipment | ●current |
| MEM18088 | Maintain and repair commercial air conditioning systems and components | ●current |
| MEM18089 | Maintain and repair central air handling systems | ●current |
| MEM18090 | Maintain and repair industrial refrigeration systems and components | ●current |
| MEM18091 | Maintain and repair multistage, cascade and/or ultra-cold industrial refrigeration systems | ●current |
| MEM18092 | Maintain and repair commercial and/or industrial refrigeration and/or air conditioning controls | ●current |
| MEM18093 | Maintain and repair integrated industrial refrigeration and/or large air handling system controls | ●current |
| MEM18094 | Service and repair commercial refrigeration | ●current |
| MEM18095 | Maintain and repair cooling towers/evaporative condensers and associated equipment | ●current |
| MEM18096 | Maintain, repair/replace and adjust refrigerant flow controls and associated equipment | ●current |
| MEM18097 | Manufacture cavity dies | ●current |
| MEM18098 | Prepare to perform work associated with fuel system installation and servicing | ●current |
| MEM18110 | Perform basic penetrant testing | ●current |
| MEM18111 | Perform basic magnetic particle testing | ●current |
| MEM18112 | Perform basic eddy current testing | ●current |
| MEM18113 | Perform ultrasonic thickness testing | ●current |
| MEM18114 | Perform basic radiographic testing | ●current |
| MEM19001 | Perform jewellery metal casting | ●current |
| MEM19002 | Prepare jewellery illustrations | ●current |
| MEM19003 | Handle gem materials | ●current |
| MEM19004 | Handle and examine gemstone materials | ●current |
| MEM19005 | Produce three-dimensional precision items | ●current |
| MEM19006 | Replace watch batteries | ●current |
| MEM19007 | Perform gemstone setting | ●current |
| MEM19009 | Perform investment procedures for lost wax casting process | ●current |
| MEM19010 | Produce rubber moulds for lost wax casting process | ●current |
| MEM19011 | Perform wax injection of moulds for lost wax casting process | ●current |
| MEM19012 | Produce jewellery wax model | ●current |
| MEM19014 | Perform hand engraving | ●current |
| MEM19015 | Perform jewellery enamelling | ●current |
| MEM19016 | Construct jewellery components | ●current |
| MEM19017 | Fabricate jewellery items | ●current |
| MEM19020 | Fault find and maintain micro-mechanisms | ●current |
| MEM19021 | Diagnose and service micro-mechanisms | ●current |
| MEM20015 | Produce hand cut keys | ●current |
| MEM20016 | Produce keys by cutting to code | ●current |
| MEM20017 | Produce keys by duplication | ●current |
| MEM20018 | Identify and program transponder keys | ●current |
| MEM20019 | Service automotive transponder systems using diagnostic equipment | ●current |
| MEM20020 | Use EEPROM programmers to service automotive transponder systems | ●current |
| MEM20022 | Modify and repair security equipment and systems | ●current |
| MEM20023 | Assemble and test lock mechanisms | ●current |
| MEM20024 | Install and upgrade locks and hardware | ●current |
| MEM20025 | Gain entry | ●current |
| MEM20026 | Install and maintain door control devices and systems | ●current |
| MEM20027 | Maintain and service mechanical locking devices | ●current |
| MEM20028 | Plan and prepare a master key system | ●current |
| MEM20029 | Develop and implement a master key system | ●current |
| MEM20030 | Gain entry and reinstate fire and security containers | ●current |
| MEM20031 | Gain entry and reinstate automotive locking systems | ●current |
| MEM20032 | Service and repair fire and security containers | ●current |
| MEM20033 | Service and repair mechanical automotive locking systems | ●current |
| MEM20035 | Perform a site security survey | ●current |
| MEM21001 | Replace watch batteries, capacitors and bands | ●current |
| MEM21002 | Perform watch movement exchange | ●current |
| MEM21003 | Perform watch case servicing, repair and refurbishment | ●current |
| MEM21004 | Clean watch and clock components | ●current |
| MEM21005 | Diagnose faults in quartz watches | ●current |
| MEM21006 | Service quartz watches | ●current |
| MEM21007 | Service complex quartz watches | ●current |
| MEM21008 | Service mechanical watches | ●current |
| MEM21009 | Inspect, diagnose, adjust and repair mechanical watches | ●current |
| MEM21010 | Service watch power generating systems | ●current |
| MEM21011 | Service calendar and other dial indication mechanisms for watches | ●current |
| MEM21012 | Service and repair mechanical watch oscillating systems | ●current |
| MEM21013 | Service, test and adjust watch escapements | ●current |
| MEM21014 | Service mechanical chronograph watches | ●current |
| MEM21015 | Perform precision watch timing and adjustment | ●current |
| MEM21016 | Install and set up clocks | ●current |
| MEM21017 | Service and repair clock timepieces | ●current |
| MEM21018 | Service clock escapements and oscillating systems | ●current |
| MEM21019 | Service and repair clock striking mechanisms | ●current |
| MEM21020 | Service and repair clock chiming mechanisms | ●current |
| MEM21021 | Restore clockwork mechanisms | ●current |
| MEM21022 | Manufacture watch and clock components | ●current |
| MEM21023 | Plan, set up and operate horological workshop or service centre | ●current |
| MEM24012 | Apply metallurgical principles | ●current |
| MEM24022 | Undertake penetrant tests | ●current |
| MEM24024 | Undertake magnetic particle tests | ●current |
| MEM24026 | Undertake eddy current tests | ●current |
| MEM24028 | Undertake ultrasonic tests | ●current |
| MEM24030 | Undertake radiographic tests | ●current |
| MEM24031 | Establish procedures for non-destructive tests | ●current |
| MEM25001 | Apply fibre-reinforced materials | ●current |
| MEM25002 | Form and integrate fibre-reinforced structures | ●current |
| MEM25003 | Set up marine vessel structures | ●current |
| MEM25004 | Fair and shape surfaces | ●current |
| MEM25005 | Construct and assemble marine vessel timber components | ●current |
| MEM25006 | Undertake marine sheathing operations | ●current |
| MEM25007 | Maintain marine vessel surfaces | ●current |
| MEM25008 | Repair marine vessel surfaces and structures | ●current |
| MEM25009 | Form timber shapes using hot processes | ●current |
| MEM25010 | Perform fitout procedures | ●current |
| MEM25011 | Install marine systems | ●current |
| MEM25012 | Install and test operations of marine auxiliary systems | ●current |
| MEM25013 | Produce three-dimensional plugs/moulds | ●current |
| MEM25014 | Perform marine slipping operations | ●current |
| MEM25015 | Assemble and install equipment and accessories/ancillaries | ●current |
| MEM27001 | Maintain and repair stationary and mobile plant engine cooling systems | ●current |
| MEM27002 | Test and repair compression ignition systems | ●current |
| MEM27003 | Overhaul engine fuel system components | ●current |
| MEM27004 | Maintain and repair engine lubrication systems | ●current |
| MEM27005 | Tune diesel engines | ●current |
| MEM27006 | Diagnose and rectify batteries, low voltage sensors and circuits | ●current |
| MEM27007 | Diagnose and rectify low voltage starting systems | ●current |
| MEM27008 | Maintain induction, exhaust and emission control systems | ●current |
| MEM27009 | Diagnose and rectify braking systems | ●current |
| MEM27010 | Diagnose and rectify low voltage charging systems | ●current |
| MEM27011 | Maintain track type undercarriage on mobile plant | ●current |
| MEM27012 | Maintain mobile plant suspension systems | ●current |
| MEM27013 | Maintain steering systems | ●current |
| MEM27014 | Diagnose and rectify automatic transmissions | ●current |
| MEM27015 | Diagnose and rectify drive line and final drives | ●current |
| MEM27016 | Diagnose and maintain electronic controlling systems on mobile and stationary plant | ●current |
| MEM27017 | Maintain, fault find and rectify hydraulic systems for mobile plant | ●current |
| MEM27018 | Test, diagnose and rectify mobile and stationary plant external monitoring and control systems | ●current |
| MEM27019 | Diagnose, repair and replace diesel engines in stationary and mobile plant | ●current |
| MEM27020 | Apply knowledge of large combustion engine operations to service and maintenance tasks | ●current |
| MEM27021 | Maintain, fault find and repair stationary plant gas turbine engines | ●current |
| MEM27022 | Maintain, fault find and repair traction drive mechanics | ●current |
| MEM27023 | Diagnose and rectify fieldbus circuits in mobile and stationary plant and equipment | ●current |
| MEM27024 | Diagnose and rectify mobile plant hydrostatic systems | ●current |
| MEM27026 | Service and repair mobile plant air conditioning systems | ●current |
| MEM27027 | Install or modify mobile plant air conditioning systems | ●current |
| MEM27029 | Maintain wheels and tyres | ●current |
| MEM27030 | Perform engine bottom-end overhaul | ●current |
| MEM27031 | Perform engine top-end overhaul | ●current |
| MEM27032 | Service combustion engines | ●current |
| MEM48004 | Interpret basic binary phase diagrams | ●current |
| MEM50002 | Work safely on marine craft | ●current |
| MEM50003 | Follow work procedures to maintain the marine environment | ●current |
| MEM50004 | Maintain quality of environment by following marina codes | ●current |
| MEM50009 | Safely operate a mechanically powered recreational boat | ●current |
| MSMENV472 | Implement and monitor environmentally sustainable work practices | ●current |
| PMBPROD391E | Produce composites using resin infusion | ●current |
| PMBPROD394E | Produce composites using resin transfer moulding | ●current |
| PMBPROD398E | Produce composites using prepregs | ●current |
| TLILIC0003 | Licence to operate a forklift truck | ●current |
| TLILIC0024 | Licence to operate a vehicle loading crane (capacity 10 metre tonnes and above) | ●current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every MEM training product on the register · Search all training products
Deliver this? We read the register nightly — get the free breakdown of your whole scope, and hear the day MEM40119 or anything else on it is superseded.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.