Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
FPI20311FWP20316=equivalent12 May 2016
The register records this supersession but attaches no note on what changed.
FWP20316FWP20322≠not equivalent24 January 2023
Qualification merged with FWP20516 Certificate II in Timber Manufactured Products. Title changed. Revised packaging rules. Reduced the number of core units. Revised the structure (groups) of the elective units. Imported elective units from other training packages. Added new units and revised existing units
Is FWP20316 on your scope?
This page is the register's record of one product. What it cannot tell you is whether FWP20316 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What FWP20316 is made of
training.gov.au lists 65 units for FWP20316: 5 core and 60 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 5 listed
| Code | Unit | In this product |
|---|---|---|
| FWPCOR2201 | Work effectively in the forest and forest products industry | !not current |
| FWPCOR2202 | Communicate and interact effectively in the workplace | !not current |
| FWPCOR2203 | Follow environmental care procedures | !not current |
| FWPCOR2205 | Follow WHS policies and procedures | !not current |
| FWPCOR2207 | Maintain quality and product care | !not current |
Elective units 60 listed
| Code | Unit | In this product |
|---|---|---|
| AHCCHM201 | Apply chemicals under supervision | ●current |
| AHCMOM207 | Conduct front-end loader operations | ●current |
| AHCWRK312 | Operate in isolated and remote situations | !not current |
| BSBINS201 | Process and maintain workplace information | ●current |
| BSBTEC201 | Use business software applications | ●current |
| FWPCOT2202 | Rack material | !not current |
| FWPCOT2206 | Stack and bind material | ●current |
| FWPCOT2209 | Produce finger jointed timber | !not current |
| FWPCOT2231 | Pack products | !not current |
| FWPCOT2233 | Navigate in forest areas | !not current |
| FWPCOT2234 | Dock material to length | !not current |
| FWPCOT2240 | Cut material with a pole saw | !not current |
| FWPCOT2243 | Tail out timber product and waste material | ●current |
| FWPCOT2244 | Operate and maintain a thicknesser | ●current |
| FWPCOT2245 | Operate and maintain a table saw | !not current |
| FWPCOT2246 | Appearance grade hardwood sawn and milled products | ●current |
| FWPCOT2249 | Visually stress grade hardwood | ●current |
| FWPCOT2250 | Visually stress grade softwood | ●current |
| FWPCOT2251 | Visually stress grade cypress | ●current |
| FWPCOT2254 | Maintain chainsaws | ●current |
| FWPCOT2255 | Store materials | ●current |
| FWPCOT2257 | Use hand-held tools | ●current |
| FWPCOT2258 | Assemble products | ●current |
| FWPCOT2259 | Cut materials with a hand-held chainsaw | ●current |
| FWPCOT2260 | Tally material | ●current |
| FWPCOT2261 | Process orders and prepare for despatch | ●current |
| FWPCOT2263 | Cross cut materials with a fixed saw | ●current |
| FWPCOT3203 | Weigh loads | !not current |
| FWPCOT3259 | Operate a four wheel drive on unsealed roads | !not current |
| FWPCOT3263 | Maintain and contribute to energy efficiency | !not current |
Show the remaining 30 elective units
| Code | Unit | In this product |
|---|---|---|
| FWPCOT3271 | Hand sharpen knives and blades for commercial and domestic cutting services | ●current |
| FWPCOT3276 | Sharpen cutters using a straight knife grinder | ●current |
| FWPCOT3290 | Apply knowledge of timber properties, sawmill operations and sawmilling equipment | ●current |
| FWPCOT3302 | Access and provide timber and wood product information | ●current |
| FWPCOT3320 | Build and maintain timber stacks | ●current |
| FWPSAW2201 | Grade round poles and debarked logs | !not current |
| FWPSAW2202 | Sort boards manually | !not current |
| FWPSAW2204 | Dock boards with mechanical feed | !not current |
| FWPSAW2206 | De-stack seasoning racks | !not current |
| FWPSAW2209 | Dismantle, transport and assemble hand portable sawmill | !not current |
| FWPSAW2212 | Assemble materials using nail plates | ●current |
| FWPSAW3247 | Replace tungsten tips | ●current |
| HLTAID011 | Provide First Aid | ●current |
| MEM05006 | Perform brazing and/or silver soldering | ●current |
| MEM11011 | Undertake manual handling | ●current |
| MEM13015 | Work safely and effectively in manufacturing and engineering | ●current |
| MEM16006 | Organise and communicate information | ●current |
| MEM18011 | Shut down and isolate machines/equipment | ●current |
| MSS402001 | Apply competitive systems and practices | !not current |
| SIRXCEG001 | Engage the customer | ●current |
| TLIC2002 | Drive light rigid vehicle | ●current |
| TLIC3003 | Drive medium rigid vehicle | ●current |
| TLID0006 | Move materials mechanically using automated equipment | ●current |
| TLID0007 | Operate specialised load shifting equipment | ●current |
| TLID1001 | Shift materials safely using manual handling methods | !not current |
| TLID2004 | Load and unload goods/cargo | !not current |
| TLID2010 | Operate a forklift | !not current |
| TLID2047 | Prepare cargo for transfer with slings | ●current |
| TLIF1002 | Conduct housekeeping activities | !not current |
| TLILIC0003 | Licence to operate a forklift truck | ●current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every FWP training product on the register · Search all training products
Is FWP20316 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.