Where the register points next
training.gov.au points at nothing after MEM30819: it is the current product, and no replacement is listed.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is MEM30819 on your scope?
This page is the register's record of one product. What it cannot tell you is whether MEM30819 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What MEM30819 is made of
training.gov.au lists 52 units for MEM30819: 12 core and 40 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 12 listed
| Code | Unit | In this product |
|---|---|---|
| MEM09002 | Interpret technical drawing | ●current |
| MEM11011 | Undertake manual handling | ●current |
| MEM12023 | Perform engineering measurements | ●current |
| MEM12024 | Perform computations | ●current |
| MEM13015 | Work safely and effectively in manufacturing and engineering | ●current |
| MEM14006 | Plan work activities | ●current |
| MEM16006 | Organise and communicate information | ●current |
| MEM16008 | Interact with computing technology | ●current |
| MEM17003 | Assist in the provision of on-the-job training | ●current |
| MEM18001 | Use hand tools | ●current |
| MEM18002 | Use power tools/hand held operations | ●current |
| MSMENV272 | Participate in environmentally sustainable work practices | ●current |
Elective units 40 listed
| Code | Unit | In this product |
|---|---|---|
| CPPSEC2021 | Install security equipment and systems | ●current |
| CPPSEC3036 | Program and configure security equipment and systems | ●current |
| CPPSEC3037 | Test installed security equipment and systems | ●current |
| CPPSEC3038 | Commission and decommission security equipment and systems | ●current |
| CPPSEC3039 | Diagnose faults in electronic security equipment and systems | ●current |
| CPPSEC3041 | Conduct routine service of security equipment and systems | ●current |
| CPPSEC3047 | Provide estimate and quote on security system installations | ●current |
| MEM05007 | Perform manual heating and thermal cutting | ●current |
| MEM07001 | Perform operational maintenance of machines/equipment | ●current |
| MEM07024 | Operate and monitor machine and process | ●current |
| MEM07032 | Use workshop machines for basic operations | ●current |
| MEM12001 | Use comparison and basic measuring devices | ●current |
| MEM12003 | Perform precision mechanical measurement | ●current |
| MEM13001 | Perform emergency first aid | ●current |
| MEM13019 | Undertake work health and safety activities in the workplace | ●current |
| MEM15004 | Perform inspection | ●current |
| MEM16004 | Perform internal/external customer service | ●current |
| MEM16005 | Operate as a team member to conduct manufacturing, engineering or related activities | ●current |
| MEM16012 | Interpret technical specifications and manuals | ●current |
| MEM18003 | Use tools for precision work | ●current |
| MEM20015 | Produce hand cut keys | ●current |
| MEM20016 | Produce keys by cutting to code | ●current |
| MEM20017 | Produce keys by duplication | ●current |
| MEM20018 | Identify and program transponder keys | ●current |
| MEM20019 | Service automotive transponder systems using diagnostic equipment | ●current |
| MEM20020 | Use EEPROM programmers to service automotive transponder systems | ●current |
| MEM20021 | Perform a building security inspection | ●current |
| MEM20022 | Modify and repair security equipment and systems | ●current |
| MEM20023 | Assemble and test lock mechanisms | ●current |
| MEM20024 | Install and upgrade locks and hardware | ●current |
Show the remaining 10 elective units
| Code | Unit | In this product |
|---|---|---|
| MEM20025 | Gain entry | ●current |
| MEM20026 | Install and maintain door control devices and systems | ●current |
| MEM20027 | Maintain and service mechanical locking devices | ●current |
| MEM20028 | Plan and prepare a master key system | ●current |
| MEM20029 | Develop and implement a master key system | ●current |
| MEM20030 | Gain entry and reinstate fire and security containers | ●current |
| MEM20031 | Gain entry and reinstate automotive locking systems | ●current |
| MEM20032 | Service and repair fire and security containers | ●current |
| MEM20033 | Service and repair mechanical automotive locking systems | ●current |
| MEM20035 | Perform a site security survey | ●current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every MEM training product on the register · Search all training products
Deliver this? We read the register nightly — get the free breakdown of your whole scope, and hear the day MEM30819 or anything else on it is superseded.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.