Where the register points next
training.gov.au points at nothing after CPC32720: it is the current product, and no replacement is listed.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is CPC32720 on your scope?
This page is the register's record of one product. What it cannot tell you is whether CPC32720 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What CPC32720 is made of
training.gov.au lists 47 units for CPC32720: 26 core and 21 elective. To complete it, the register publishes a rule of 26 core units plus 5 electives — 31 units in all.
Core units 26 listed
| Code | Unit | In this product |
|---|---|---|
| CPCCCM2012 | Work safely at heights | ●current |
| CPCCWHS2001 | Apply WHS requirements, policies and procedures in the construction industry | ●current |
| CPCPCM2039 | Carry out interactive workplace communication | ●current |
| CPCPCM2040 | Read plans, calculate quantities and mark out materials | ●current |
| CPCPCM2041 | Work effectively in the plumbing services sector | ●current |
| CPCPCM2043 | Carry out WHS requirements | ●current |
| CPCPCM2045 | Handle and store plumbing materials | ●current |
| CPCPCM2046 | Use plumbing hand and power tools | ●current |
| CPCPCM2047 | Carry out levelling | ●current |
| CPCPCM2048 | Cut and join sheet metal | ●current |
| CPCPCM2055 | Work safely on roofs | ●current |
| CPCPCM3021 | Flash penetrations through roofs and walls | ●current |
| CPCPCM3022 | Weld polymer pipes using fusion method | ●current |
| CPCPCM3023 | Fabricate and install non-ferrous pressure piping | ●current |
| CPCPGS3046 | Install LPG systems in caravans, mobile homes and mobile workplaces | ●current |
| CPCPGS3047 | Install LPG systems in marine craft | ●current |
| CPCPGS3048 | Install gas pressure control equipment | ●current |
| CPCPGS3049 | Install gas appliance flues | ●current |
| CPCPGS3051 | Purge consumer piping | ●current |
| CPCPGS3052 | Maintain Type A gas appliances | ●current |
| CPCPGS3053 | Disconnect and reconnect Type A gas appliances | ●current |
| CPCPGS3054 | Calculate and install natural ventilation for Type A gas appliances | ●current |
| CPCPGS3056 | Size and install consumer gas piping systems | ●current |
| CPCPGS3059 | Install LPG storage of aggregate storage capacity up to 500 litres | ●current |
| CPCPGS3061 | Install and commission Type A gas appliances | ●current |
| HLTAID011 | Provide First Aid | ●current |
Elective units 21 listed
| Code | Unit | In this product |
|---|---|---|
| CPCCCM2008 | Erect and dismantle restricted height scaffolding | ●current |
| CPCCCM3001 | Operate elevated work platforms up to 11 metres | ●current |
| CPCCRI3001 | Operate personnel and materials hoists | ●current |
| CPCCST2005 | Carry out load slinging of off-site materials | ●current |
| CPCPCM2049 | Cut using oxy-acetylene equipment | ●current |
| CPCPCM2053 | Weld using metal arc welding equipment | ●current |
| CPCPCM2054 | Carry out simple concreting and rendering | ●current |
| CPCPCM3024 | Prepare simple drawings | ●current |
| CPCPCM3025 | Install trench support | ●current |
| CPCPCM4013 | Produce 2-D architectural drawings using design software | ●current |
| CPCPGS3055 | Install gas sub-meters | ●current |
| CPCPGS3060 | Install LPG storage of aggregate storage capacity exceeding 500 litres and less than 8 kl | ●current |
| CPCPGS4011 | Design and size consumer gas installations | ●current |
| CPCPMS3031 | Fabricate and install steel pressure piping | ●current |
| CPCPMS3033 | Install small bore heating systems | ●current |
| MEM05049 | Perform routine gas tungsten arc welding | ●current |
| MEM05050 | Perform routine gas metal arc welding | ●current |
| MEM11011 | Undertake manual handling | ●current |
| MEM13015 | Work safely and effectively in manufacturing and engineering | ●current |
| MEM16006 | Organise and communicate information | ●current |
| UEERL0004 | Disconnect - reconnect electrical equipment connected to low voltage (LV) installation wiring | ●current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every CPC training product on the register · Search all training products
Deliver this? We read the register nightly — get the free breakdown of your whole scope, and hear the day CPC32720 or anything else on it is superseded.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.