Where the register points next
training.gov.au points at nothing after CPC20220: it is the current product, and no replacement is listed.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is CPC20220 on your scope?
This page is the register's record of one product. What it cannot tell you is whether CPC20220 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What CPC20220 is made of
training.gov.au lists 45 units for CPC20220: 5 core and 40 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 5 listed
| Code | Unit | In this product |
|---|---|---|
| CPCCOM1012 | Work effectively and sustainably in the construction industry | ●current |
| CPCCOM1013 | Plan and organise work | ●current |
| CPCCOM1015 | Carry out measurements and calculations | ●current |
| CPCCVE1011 | Undertake a basic construction project | ●current |
| CPCCWHS2001 | Apply WHS requirements, policies and procedures in the construction industry | ●current |
Elective units 40 listed
| Code | Unit | In this product |
|---|---|---|
| CPCCBL2001 | Handle and prepare bricklaying and blocklaying materials | ●current |
| CPCCBL2002 | Use bricklaying and blocklaying tools and equipment | ●current |
| CPCCCA2002 | Use carpentry tools and equipment | ●current |
| CPCCCA2011 | Handle carpentry materials | ●current |
| CPCCCM1011 | Undertake basic estimation and costing | ●current |
| CPCCCM2004 | Handle construction materials | ●current |
| CPCCCM2006 | Apply basic levelling procedures | ●current |
| CPCCCM2009 | Carry out basic demolition | ●current |
| CPCCCM2012 | Work safely at heights | ●current |
| CPCCCM2013 | Undertake basic installation of wall tiles | ●current |
| CPCCCO2013 | Carry out concreting to simple forms | ●current |
| CPCCJN2001 | Assemble components | ●current |
| CPCCJN3004 | Manufacture and assemble joinery components | ●current |
| CPCCJN3100 | Process materials to produce components using static machines | ●current |
| CPCCPD2011 | Handle and store painting and decorating materials | ●current |
| CPCCPD2012 | Use painting and decorating tools and equipment | ●current |
| CPCCPD3021 | Prepare existing coated surface for painting | ●current |
| CPCCPD3022 | Apply paint by brush and roller | ●current |
| CPCCSH2003 | Apply and install sealant and sealant devices | ●current |
| CPCCSP2001 | Handle solid plastering materials | ●current |
| CPCCSP2002 | Use solid plastering tools and equipment | ●current |
| CPCCSP2003 | Prepare surfaces for plastering | ●current |
| CPCCST2006 | Identify and use stone products | ●current |
| CPCCST2007 | Use stonemasonry tools, plant and equipment | ●current |
| CPCCWF2002 | Use wall and floor tiling tools and equipment | ●current |
| CPCCWF3004 | Repair wall and floor tiling | ●current |
| CPCCWP2001 | Handle waterproofing materials and components | ●current |
| CPCCWP2002 | Use waterproofing tools and equipment | ●current |
| CPCPCM2043 | Carry out WHS requirements | ●current |
| CPCPCM2055 | Work safely on roofs | ●current |
Show the remaining 10 elective units
| Code | Unit | In this product |
|---|---|---|
| CPCPRF2022 | Select and install roof sheeting and wall cladding | ●current |
| MEM05050 | Perform routine gas metal arc welding | ●current |
| MEM11011 | Undertake manual handling | ●current |
| MEM13015 | Work safely and effectively in manufacturing and engineering | ●current |
| MEM16006 | Organise and communicate information | ●current |
| RIICCM210E | Install trench support | ●current |
| RIIWHS205E | Control traffic with stop-slow bat | ●current |
| RIIWMG203E | Drain and dewater civil construction sites | ●current |
| UEECD0007 | Apply work health and safety regulations, codes and practices in the workplace | ●current |
| UEERL0003 | Conduct in-service safety testing of electrical cord connected equipment and cord assemblies | ●current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every CPC training product on the register · Search all training products
Deliver this? We read the register nightly — get the free breakdown of your whole scope, and hear the day CPC20220 or anything else on it is superseded.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.