Where the register points next
training.gov.au points at nothing after PMB20121: it is the current product, and no replacement is listed.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is PMB20121 on your scope?
This page is the register's record of one product. What it cannot tell you is whether PMB20121 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What PMB20121 is made of
training.gov.au lists 95 units for PMB20121: 2 core and 93 elective. To complete it, the register publishes a rule of 2 core units plus 12 electives — 14 units in all.
Core units 2 listed
Elective units 93 listed
| Code | Unit | In this product |
|---|---|---|
| HLTAID011 | Provide First Aid | ●current |
| MEM11011 | Undertake manual handling | ●current |
| MEM13003 | Work safely with industrial chemicals and materials | ●current |
| MEM13015 | Work safely and effectively in manufacturing and engineering | ●current |
| MEM16006 | Organise and communicate information | ●current |
| MEM16008 | Interact with computing technology | ●current |
| MEM18001 | Use hand tools | ●current |
| MEM18002 | Use power tools/hand held operations | ●current |
| MSMENV172 | Identify and minimise environmental hazards | ●current |
| MSMENV272 | Participate in environmentally sustainable work practices | ●current |
| MSMOPS100 | Use equipment | ●current |
| MSMOPS101 | Make measurements | ●current |
| MSMOPS102 | Perform tasks to support production | ●current |
| MSMOPS200 | Operate equipment | ●current |
| MSMOPS212 | Use organisation computers or data systems | ●current |
| MSMOPS244 | Lay out and cut materials | ●current |
| MSMPER200 | Work in accordance with an issued permit | ●current |
| MSMPER201 | Monitor and control work permits | ●current |
| MSMPER205 | Enter confined space | ●current |
| MSMSUP100 | Apply workplace context to own job | ●current |
| MSMSUP101 | Clean workplace or equipment | ●current |
| MSMSUP102 | Communicate in the workplace | ●current |
| MSMSUP106 | Work in a team | ●current |
| MSMSUP200 | Achieve work outcomes | ●current |
| MSMSUP204 | Pack products or materials | ●current |
| MSMSUP205 | Transfer loads | ●current |
| MSMSUP230 | Monitor process operations | ●current |
| MSMSUP240 | Undertake minor maintenance | ●current |
| MSMSUP273 | Handle goods | ●current |
| MSMSUP280 | Manage conflict at work | ●current |
Show the remaining 63 elective units
| Code | Unit | In this product |
|---|---|---|
| MSMSUP291 | Participate in continuous improvement | ●current |
| MSMSUP292 | Sample and test materials and product | ●current |
| MSMWHS100 | Follow WHS procedures | ●current |
| MSMWHS110 | Follow emergency response procedures | ●current |
| MSMWHS205 | Control minor incidents | ●current |
| MSMWHS210 | Undertake first response to non-fire incidents | ●current |
| MSMWHS212 | Undertake first response to fire incidents | ●current |
| MSMWHS216 | Operate breathing apparatus | ●current |
| MSMWHS217 | Gas test atmospheres | ●current |
| MSS402002 | Sustain process improvements | !not current |
| MSS402020 | Apply quick changeover procedures | !not current |
| MSS402021 | Apply Just in Time procedures | !not current |
| MSS402040 | Apply 5S procedures | !not current |
| MSS402050 | Monitor process capability | !not current |
| MSS402051 | Apply quality standards | !not current |
| MSS402080 | Undertake root cause analysis | !not current |
| MSS402082 | Apply cost factors to work practices | !not current |
| MSS402083 | Use planning software systems in operations | !not current |
| MSTGN3009 | Coordinate work of team or section | ●current |
| PMBFIN201E | Finish components and products | ●current |
| PMBFIN202E | Fit attachments and assemble components for customised polymer products | ●current |
| PMBFIN203E | Rework product imperfections | ●current |
| PMBFIN205E | Hand decorate products | ●current |
| PMBHAN103E | Shift materials safely by hand | ●current |
| PMBPREP201E | Prepare moulds for composites production | ●current |
| PMBPREP205E | Assemble materials and equipment for production | ●current |
| PMBPREP206E | Prepare polymer materials to specified formulae | ●current |
| PMBPROD206E | Operate ancillary equipment | ●current |
| PMBPROD207E | Operate rubber calendering equipment | ●current |
| PMBPROD209E | Operate cable winding equipment | ●current |
| PMBPROD210E | Operate injection moulding equipment | ●current |
| PMBPROD213E | Operate polymer extruders | ●current |
| PMBPROD216E | Operate blown film equipment | ●current |
| PMBPROD217E | Operate printing equipment | ●current |
| PMBPROD221E | Operate rotational moulding equipment | ●current |
| PMBPROD235E | Use materials and process knowledge to complete work operations | ●current |
| PMBPROD236E | Operate hand-held air or power equipment for production processes | ●current |
| PMBPROD238E | Perform creel rack operations for belting production | ●current |
| PMBPROD239E | Build fabric-reinforced conveyor belts | ●current |
| PMBPROD240E | Cut plastic materials | ●current |
| PMBPROD241E | Install rubber lining or pulley lagging using lay-up techniques | ●current |
| PMBPROD242E | Bond polymers to surfaces | ●current |
| PMBPROD243E | Cut rubber materials | ●current |
| PMBPROD245E | Fabricate products with rubber or plastics | ●current |
| PMBPROD246E | Hand mix materials | ●current |
| PMBPROD247E | Create composite laminates using hand lay-up techniques | ●current |
| PMBPROD248E | Prepare surfaces for coating | ●current |
| PMBPROD249E | Apply liquid surface coatings | ●current |
| PMBPROD251E | Apply gel coat or other polymer surface finish | ●current |
| PMBPROD252E | Operate polymer compounding equipment | ●current |
| PMBPROD253E | Operate an internal mill blender | ●current |
| PMBPROD254E | Operate an open mill blender | ●current |
| PMBPROD255E | Operate polymer mixing equipment | ●current |
| PMBPROD261E | Operate continuous vulcanising equipment | ●current |
| PMBPROD265E | Operate portable vulcanising equipment | ●current |
| PMBPROD280E | Operate a chopper gun to lay-up composites | ●current |
| PMBPROD281E | Finish composite products | ●current |
| PMBPROD282E | Reassemble production mould components | ●current |
| PMBPROD283E | Demould polymer products | ●current |
| PMBPROD287E | Weld thermoplastics materials | ●current |
| PMBPROD293E | Create composite laminates using vacuum-assisted closed-moulding processes | ●current |
| RIIRIS201D | Conduct local risk control | !not current |
| TLID2010 | Operate a forklift | !not current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every PMB training product on the register · Search all training products
Deliver this? We read the register nightly — get the free breakdown of your whole scope, and hear the day PMB20121 or anything else on it is superseded.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.