Current 133
The register lists these as current today. Nothing here is superseded.
Qualification 4
Training package 1
- PMBPlastics, Rubber and Cablemaking
Unit of competency 128
- PMBFIN201EFinish components and products
- PMBFIN202EFit attachments and assemble components for customised polymer products
- PMBFIN203ERework product imperfections
- PMBFIN205EHand decorate products
- PMBHAN103EShift materials safely by hand
- PMBPREP201EPrepare moulds for composites production
- PMBPREP205EAssemble materials and equipment for production
- PMBPREP206EPrepare polymer materials to specified formulae
- PMBPREP301ESet up and prepare for batch production
- PMBPREP303ESet up equipment for continuous operation
- PMBPREP304ESet a die for injection moulding production
- PMBPREP305EChange extrusion die and calibrator
- PMBPROD206EOperate ancillary equipment
- PMBPROD207EOperate rubber calendering equipment
- PMBPROD209EOperate cable winding equipment
- PMBPROD210EOperate injection moulding equipment
- PMBPROD213EOperate polymer extruders
- PMBPROD216EOperate blown film equipment
- PMBPROD217EOperate printing equipment
- PMBPROD221EOperate rotational moulding equipment
- PMBPROD235EUse materials and process knowledge to complete work operations
- PMBPROD236EOperate hand-held air or power equipment for production processes
- PMBPROD238EPerform creel rack operations for belting production
- PMBPROD239EBuild fabric-reinforced conveyor belts
- PMBPROD240ECut plastic materials
- PMBPROD241EInstall rubber lining or pulley lagging using lay-up techniques
- PMBPROD242EBond polymers to surfaces
- PMBPROD243ECut rubber materials
- PMBPROD245EFabricate products with rubber or plastics
- PMBPROD246EHand mix materials
- PMBPROD247ECreate composite laminates using hand lay-up techniques
- PMBPROD248EPrepare surfaces for coating
- PMBPROD249EApply liquid surface coatings
- PMBPROD251EApply gel coat or other polymer surface finish
- PMBPROD252EOperate polymer compounding equipment
- PMBPROD253EOperate an internal mill blender
- PMBPROD254EOperate an open mill blender
- PMBPROD255EOperate polymer mixing equipment
- PMBPROD261EOperate continuous vulcanising equipment
- PMBPROD265EOperate portable vulcanising equipment
- PMBPROD280EOperate a chopper gun to lay-up composites
- PMBPROD281EFinish composite products
- PMBPROD282EReassemble production mould components
- PMBPROD283EDemould polymer products
- PMBPROD287EWeld thermoplastics materials
- PMBPROD293ECreate composite laminates using vacuum-assisted closed-moulding processes
- PMBPROD300EProduce products
- PMBPROD301EDraw wire
- PMBPROD302EBunch and strand wire
- PMBPROD303EProduce cable and tape lay-up cables
- PMBPROD304EWind up wire or belts
- PMBPROD306EPrepare and start equipment for production
- PMBPROD307EProduce calendered rubber or vinyl products
- PMBPROD308ETake a machine out of production
- PMBPROD310EProduce injection moulded products
- PMBPROD311EProduce blow moulded products
- PMBPROD313EProduce extruded polymer products
- PMBPROD316EProduce blown film
- PMBPROD321EProduce rotational moulded products
- PMBPROD325ELay on tyre retreads
- PMBPROD326EInspect tyres
- PMBPROD328EProduce sheet-fed vacuum-formed products
- PMBPROD330EMake moulds for thermoformed products
- PMBPROD336EInspect heavy off-the-road tyres
- PMBPROD337EPrepare heavy off-the-road tyres for repair
- PMBPROD338ERepair heavy off-the-road tyres
- PMBPROD339EProduce steel cord-reinforced conveyor belts
- PMBPROD340ECure heavy off-the-road tyre repairs
- PMBPROD341EFinish heavy off-the-road tyre repairs
- PMBPROD343EShut down plant area
- PMBPROD347EMould composites products using hand lay-up techniques
- PMBPROD352EProduce compounded materials
- PMBPROD355EMake pattern or plug for composites moulds
- PMBPROD356EConstruct moulds for composite products
- PMBPROD357EConstruct jigs and fixtures
- PMBPROD358EDevelop polymer product patterns
- PMBPROD360EProduce polyurethane products using centrifugal casting
- PMBPROD362EProduce polyurethane products using gravity casting
- PMBPROD367ERemove and replace conveyor belts
- PMBPROD368ERepair conveyor belt carcasses
- PMBPROD369ERepair conveyor belt covers
- PMBPROD370EProduce injection blow moulded products
- PMBPROD375EVulcanise products using an autoclave
- PMBPROD376ESplice steel cord conveyor belts
- PMBPROD377ESplice fabric ply conveyor belts
- PMBPROD378ESplice solid woven conveyor belts
- PMBPROD380EProduce composites products using mechanised open mould wet lay-up
- PMBPROD384EOperate multi-axis router
- PMBPROD385EProgram computer-controlled equipment
- PMBPROD390EProduce composites using filament winding
- PMBPROD391EProduce composites using resin infusion
- PMBPROD392EProduce thermoset composites using pultrusion
- PMBPROD393EProduce composites using vacuum bagging
- PMBPROD394EProduce composites using resin transfer moulding
- PMBPROD398EProduce composites using prepregs
- PMBPROD430ETrial a new injection moulding die
- PMBPROD431ETrial a new production mould assembly
- PMBTECH301EOptimise polymer processing operations
- PMBTECH302EModify existing compounds
- PMBTECH303EMake minor modifications to products
- PMBTECH401EPredict polymer properties and characteristics
- PMBTECH402ESet advanced or complex injection moulding dies
- PMBTECH403ETest thermoset composite laminates and materials
- PMBTECH404EMould composites with chemically-resistant or fire-retardant properties
- PMBTECH405ERepair damaged fibre-composites structures
- PMBTECH406EDiagnose production equipment problems
- PMBTECH407EProduce composite products using cored-laminate techniques
- PMBTECH501EAnalyse equipment performance
- PMBTECH502EAnalyse production trials
- PMBTECH505EChoose polymer materials for an application
- PMBTECH506EAnalyse the design of products and tools for polymer injection moulding
- PMBTECH507EDevelop fibre-composite products using cored-laminate techniques
- PMBTECH508EDevelop a new compound
- PMBTECH509EModify an existing product
- PMBTECH601EDevelop a new product
- PMBTECH602EDevelop a new die or tool
- PMBTECH603EDesign structural or mechanical polymer components
- PMBWELD301EJoin polyethylene plastic pipelines using butt welding
- PMBWELD302EJoin polyethylene plastic pipelines using electrofusion welding
- PMBWELD303EInstall polyethylene plastic pipelines for non-pressure drainage
- PMBWELD304EDesign polyethylene plastic pipelines for non-pressure drainage
- PMBWELD305EInstall polyethylene plastic pipelines for pressurised applications
- PMBWELD306EDesign polyethylene plastic pipelines for pressurised applications
- PMBWELD307EInstall plastic pipelines for high temperature applications
- PMBWELD308EInstall PVC plastic pipelines for pressurised applications
- PMBWELD309EWeld plastic using extrusion techniques
- PMBWELD310EDesign PVC plastic pipelines for pressure applications
- PMBWELD311EDesign plastic pipelines for high temperature and pressure applications
Superseded — replacement not equivalent 2
The register has superseded these and declares the replacement NOT equivalent: the content moved, so assessment tools, mapping and trainer files have to be revisited rather than renumbered.
Superseded — replacement equivalent 477
The register has superseded these and declares the replacement equivalent to what it replaced.
Qualification 14
- PMB20101Certificate II in Plastics
- PMB20107Certificate II in Polymer Processing
- PMB20116Certificate II in Polymer Processing
- PMB30101Certificate III in Plastics
- PMB30107Certificate III in Polymer Processing
- PMB30116Certificate III in Polymer Processing
- PMB40101Certificate IV in Polymer Technology
- PMB40107Certificate IV in Polymer Technology
- PMB40116Certificate IV in Polymer Technology
- PMB50101Diploma of Polymer Technology
- PMB50107Diploma of Polymer Technology
- PMB50116Diploma of Polymer Technology
- PMB60101Advanced Diploma of Polymer Technology
- PMB60107Advanced Diploma of Polymer Technology
Training package 1
- PMB07Plastics, Rubber and Cablemaking Training Package
Unit of competency 462
- PMBFIN201Finish products and components
- PMBFIN201BFinish products and components
- PMBFIN201CFinish products and components
- PMBFIN202Fit attachments to products
- PMBFIN202BFit attachments to products
- PMBFIN202CFit attachments to products
- PMBFIN203Repair product imperfections
- PMBFIN203BRepair product imperfections
- PMBFIN203CRepair product imperfections
- PMBFIN205Hand decorate products
- PMBFIN205BHand decorate products
- PMBFIN205CHand decorate products
- PMBHAN103Shift materials safely by hand
- PMBHAN103BShift materials safely by hand
- PMBHAN103CShift materials safely by hand
- PMBHAN208BStore products
- PMBHAN208CStore products
- PMBPREP201Prepare moulds for composites production
- PMBPREP201APrepare moulds for composites production
- PMBPREP201BPrepare moulds for composites production
- PMBPREP205Assemble materials and equipment for production
- PMBPREP205BAssemble materials and equipment for production
- PMBPREP205CAssemble materials and equipment for production
- PMBPREP206Prepare materials to formulae
- PMBPREP206BPrepare materials to formulae
- PMBPREP206CPrepare materials to formulae
- PMBPREP301Set up and prepare for production
- PMBPREP301BSet up and prepare for production
- PMBPREP301CSet up and prepare for production
- PMBPREP303Set up equipment for continuous operation
- PMBPREP303BSet up equipment for continuous operation
- PMBPREP303CSet up equipment for continuous operation
- PMBPREP304Set a die
- PMBPREP304BChange equipment dies
- PMBPREP304CSet a die
- PMBPREP305Change extrusion die and setup
- PMBPREP305AChange extrusion die and calibration setup
- PMBPREP305BChange extrusion die and setup
- PMBPROD206Operate ancillary equipment
- PMBPROD206AOperate ancillary equipment
- PMBPROD206BOperate ancillary equipment
- PMBPROD207Operate calender
- PMBPROD207AOperate calender
- PMBPROD207BOperate calender
- PMBPROD209Operate cable winding equipment
- PMBPROD209BOperate cable winding equipment
- PMBPROD209COperate cable winding equipment
- PMBPROD210Operate injection moulding equipment
- PMBPROD210AOperate injection moulding equipment
- PMBPROD210BOperate injection moulding equipment
- PMBPROD211AOperate blow moulding equipment
- PMBPROD211BOperate blow moulding equipment
- PMBPROD212AOperate thermoforming equipment
- PMBPROD212BOperate thermoforming equipment
- PMBPROD213Operate extruders
- PMBPROD213AOperate extruders
- PMBPROD213BOperate extruders
- PMBPROD216Operate blown film equipment
- PMBPROD216AOperate blown film equipment
- PMBPROD216BOperate blown film equipment
- PMBPROD217Operate printing equipment
- PMBPROD217AOperate printing equipment
- PMBPROD217BOperate printing equipment
- PMBPROD221Operate rotational moulding equipment
- PMBPROD221AOperate rotational moulding equipment
- PMBPROD221BOperate rotational moulding equipment
- PMBPROD229AOperate polystyrene shape moulding equipment
- PMBPROD229BOperate polystyrene shape moulding equipment
- PMBPROD233AOperate film conversion equipment
- PMBPROD233BOperate film conversion equipment
- PMBPROD235Use materials and process knowledge to complete work operations
- PMBPROD235BUse materials and process knowledge to complete work operations
- PMBPROD235CUse materials and process knowledge to complete work operations
- PMBPROD236Operate hand held air/power equipment for production processes
- PMBPROD236BOperate hand held air/power equipment for production processes
- PMBPROD236COperate hand held air/power equipment for production processes
- PMBPROD237BSplice cables
- PMBPROD237CSplice cables
- PMBPROD238Perform creel rack operations
- PMBPROD238APerform creel rack operations
- PMBPROD239Build reinforced conveyor belts
- PMBPROD239ABuild reinforced conveyor belts
- PMBPROD240Cut materials
- PMBPROD240BCut materials
- PMBPROD240CCut materials
- PMBPROD241Lay up rubber lining or lag pulleys
- PMBPROD241ALay up rubber lining
- PMBPROD241CLay up rubber lining or lag pulleys
- PMBPROD242Bond polymers to surfaces
- PMBPROD242ABond polymers to surfaces
- PMBPROD245Fabricate materials
- PMBPROD245BFabricate materials
- PMBPROD245CFabricate materials
- PMBPROD246Hand mix materials
- PMBPROD246BHand mix materials
- PMBPROD246CHand mix materials
- PMBPROD247Hand lay up composites
- PMBPROD247BHand lay up composites
- PMBPROD247CHand lay up composites
- PMBPROD248Prepare surfaces for coating
- PMBPROD248BPrepare surfaces for coating
- PMBPROD248CPrepare surfaces for coating
- PMBPROD249Apply liquid surface coatings
- PMBPROD249AApply liquid surface coatings
- PMBPROD249BApply liquid surface coatings
- PMBPROD251Apply gel coat or other polymer surface finish
- PMBPROD251AApply gel coat or other polymer surface finish
- PMBPROD251BApply gel coat or other polymer surface finish
- PMBPROD252Operate compounding equipment
- PMBPROD252BOperate compounding equipment
- PMBPROD252COperate compounding equipment
- PMBPROD253Operate an internal mill blender
- PMBPROD253BOperate an internal mill blender
- PMBPROD253COperate an internal mill blender
- PMBPROD254Operate an open mill blender
- PMBPROD254BOperate an open mill blender
- PMBPROD254COperate an open mill blender
- PMBPROD255Operate mixing equipment
- PMBPROD255BOperate mixing equipment
- PMBPROD255COperate mixing equipment
- PMBPROD259BOperate granulating equipment
- PMBPROD259COperate granulating equipment
- PMBPROD261Operate continuous vulcanising equipment
- PMBPROD261AOperate continuous vulcanising equipment
- PMBPROD261BOperate continuous vulcanising equipment
- PMBPROD262AOperate tyre curing equipment
- PMBPROD262BOperate tyre curing equipment
- PMBPROD263AOperate retread curing equipment
- PMBPROD263BOperate retread curing equipment
- PMBPROD264BCheck recycle wash process
- PMBPROD265Operate portable vulcanising equipment
- PMBPROD265BOperate portable vulcanising equipment
- PMBPROD265COperate portable vulcanising equipment
- PMBPROD266APrepare tyre casings for retreading
- PMBPROD266BPrepare tyre casings for retreading
- PMBPROD267AOperate steel cutting equipment
- PMBPROD267BOperate steel cutting equipment
- PMBPROD268AOperate bead coiling equipment
- PMBPROD268BOperate bead coiling equipment
- PMBPROD270AOperate injection blow moulding equipment
- PMBPROD270BOperate injection blow moulding equipment
- PMBPROD280Operate resin-glass depositor equipment
- PMBPROD280AOperate resin-glass depositor equipment
- PMBPROD280BOperate resin-glass depositor equipment
- PMBPROD281Finish composite products
- PMBPROD281AFinish composite products
- PMBPROD281BFinish composite products
- PMBPROD282Assemble mould
- PMBPROD282AAssemble mould
- PMBPROD282BAssemble mould
- PMBPROD283Demould product
- PMBPROD283ADemould product
- PMBPROD283BDemould product
- PMBPROD284AOperate open flame moulding equipment
- PMBPROD284BOperate open flame moulding equipment
- PMBPROD285AOperate computer controlled equipment
- PMBPROD287Weld plastics materials
- PMBPROD287AWeld plastics materials
- PMBPROD287BWeld plastics materials
- PMBPROD290AOperate filament winding equipment
- PMBPROD290BOperate filament winding equipment
- PMBPROD291AOperate resin infusion moulding equipment
- PMBPROD291BOperate resin infusion moulding equipment
- PMBPROD292AOperate pultrusion equipment
- PMBPROD292BOperate pultrusion equipment
- PMBPROD293Operate vacuum bagging equipment
- PMBPROD293AOperate vacuum bagging equipment
- PMBPROD293BOperate vacuum bagging equipment
- PMBPROD294AOperate resin transfer moulding equipment
- PMBPROD294BOperate resin transfer moulding equipment
- PMBPROD295AOperate composite sheeting equipment
- PMBPROD295BOperate composite sheeting equipment
- PMBPROD296AOperate centrifugal casting equipment
- PMBPROD296BOperate centrifugal casting equipment
- PMBPROD297AOperate equipment using moulding compounds
- PMBPROD297BOperate equipment using moulding compounds
- PMBPROD298AOperate equipment using pre-preg material
- PMBPROD298BOperate equipment using pre-preg material
- PMBPROD300Produce products
- PMBPROD300AProduce products
- PMBPROD300BProduce products
- PMBPROD301Draw wire
- PMBPROD301BDraw wire
- PMBPROD301CDraw wire
- PMBPROD302Bunch and strand wire
- PMBPROD302BBunch and strand wire
- PMBPROD302CBunch and strand wire
- PMBPROD303Lay up and tape cables
- PMBPROD303BLay up and tape cables
- PMBPROD303CLay up and tape cables
- PMBPROD304Wind products onto drums
- PMBPROD304BWind products onto drums
- PMBPROD304CWind products onto drums
- PMBPROD305BColour optical fibre
- PMBPROD305CColour optical fibre
- PMBPROD306Prepare and start equipment for production
- PMBPROD306APrepare and start equipment for production
- PMBPROD306BPrepare and start equipment for production
- PMBPROD307Produce calendered products
- PMBPROD307BProduce calendered products
- PMBPROD307CProduce calendered products
- PMBPROD308Take a machine out of production
- PMBPROD308ATake a machine out of production
- PMBPROD308BTake a machine out of production
- PMBPROD309BProduce electroplated products
- PMBPROD309CProduce electroplated products
- PMBPROD310Produce injection moulded products
- PMBPROD310BProduce injection moulded products
- PMBPROD310CProduce injection moulded products
- PMBPROD311Produce blow moulded products
- PMBPROD311BProduce blow moulded products
- PMBPROD311CProduce blow moulded products
- PMBPROD312BProduce continuous thermoforming products
- PMBPROD312CProduce continuous thermoforming products
- PMBPROD313Produce extruded products
- PMBPROD313BProduce extruded products
- PMBPROD313CProduce extruded products
- PMBPROD314BProduce compression moulded products
- PMBPROD314CProduce compression moulded products
- PMBPROD315BProduce polyurethane foam
- PMBPROD315CProduce polyurethane foam
- PMBPROD316Produce blown film
- PMBPROD316BProduce blown film
- PMBPROD316CProduce blown film
- PMBPROD317BPrint and decorate rigid products
- PMBPROD317CPrint and decorate rigid products
- PMBPROD318BBuild first stage tyres
- PMBPROD319BBuild up rollers
- PMBPROD319CBuild up rollers
- PMBPROD320BProduce foam injected mouldings
- PMBPROD320CProduce foam injected mouldings
- PMBPROD321Produce rotational moulded products
- PMBPROD321AProduce rotational moulded products
- PMBPROD321BProduce rotational moulded products
- PMBPROD323BProduce powder coated products
- PMBPROD323CProduce powder coated products
- PMBPROD324AInspect tyres for retreading
- PMBPROD324BInspect tyres for retreading
- PMBPROD325Lay on tyre retreads
- PMBPROD325ALay on tyre retreads
- PMBPROD325BLay on tyre retreads
- PMBPROD326Inspect tyres
- PMBPROD326AInspect tyres
- PMBPROD326BInspect tyres
- PMBPROD327AProduce finished tyres
- PMBPROD328Produce sheet feed vacuum forming products
- PMBPROD328BProduce sheet feed vacuum forming products
- PMBPROD328CProduce sheet feed vacuum forming products
- PMBPROD329BProduce polystyrene shape moulded products
- PMBPROD329CProduce polystyrene shape moulded products
- PMBPROD330Make moulds for formed products
- PMBPROD330AMake moulds for formed products
- PMBPROD331BProduce printed and decorated film
- PMBPROD331CProduce printed and decorated film
- PMBPROD332BProduce thermally bent products
- PMBPROD332CProduce thermally bent products
- PMBPROD333AConvert plastic film
- PMBPROD333BConvert plastic film
- PMBPROD334AProduce products using twin screw extruders
- PMBPROD335BBuild second stage tyres
- PMBPROD336Inspect heavy off-the-road tyres
- PMBPROD336AInspect heavy off-the-road tyres
- PMBPROD337Prepare heavy off-the-road tyres for repair
- PMBPROD337APrepare heavy off-the-road tyres for repair
- PMBPROD338Repair heavy off-the-road tyres
- PMBPROD338ARepair heavy off-the-road tyres
- PMBPROD339Produce reinforced conveyor belts
- PMBPROD339AProduce reinforced conveyor belts
- PMBPROD340Cure heavy off-the-road tyre repairs
- PMBPROD340ACure heavy off-the-road tyre repairs
- PMBPROD341Finish heavy off-the-road tyre repairs
- PMBPROD341AFinish heavy off-the-road tyre repairs
- PMBPROD343Shut down plant area
- PMBPROD343BShut down plant or plant area
- PMBPROD343CShut down plant area
- PMBPROD347Produce composites using hand lamination
- PMBPROD347AProduce composites using hand lamination
- PMBPROD347BProduce composites using hand lamination
- PMBPROD349AProduce liquid surface coated products
- PMBPROD349BProduce liquid surface coated products
- PMBPROD352Produce compounded materials
- PMBPROD352AProduce compounded materials
- PMBPROD353ACompound materials using an internal mill blender
- PMBPROD353BCompound materials using an internal mill blender
- PMBPROD354ACompound materials using an open mill blender
- PMBPROD354BCompound materials using an open mill blender
- PMBPROD355Make pattern/plug for composites moulds
- PMBPROD355AMake pattern/plug for composites moulds
- PMBPROD355BMake pattern/plug for composites moulds
- PMBPROD356Construct moulds for composite products
- PMBPROD356BConstruct composite moulds
- PMBPROD356CConstruct moulds for composite products
- PMBPROD357Construct jigs and fixtures
- PMBPROD357BConstruct jigs and fixtures
- PMBPROD357CConstruct jigs and fixtures
- PMBPROD358Develop patterns
- PMBPROD358BDevelop patterns
- PMBPROD358CDevelop patterns
- PMBPROD360Produce centrifugally cast polyurethane products
- PMBPROD360AProduce centrifugally cast polyurethane products
- PMBPROD360BProduce centrifugally cast polyurethane products
- PMBPROD362Produce gravity cast polyurethane products
- PMBPROD362AProduce gravity cast polyurethane products
- PMBPROD362BProduce gravity cast polyurethane products
- PMBPROD367Remove and replace conveyor belts
- PMBPROD367ARemove and replace belts
- PMBPROD367BRemove and replace conveyor belts
- PMBPROD368Repair conveyor belt carcass
- PMBPROD368ARepair conveyor belt carcass
- PMBPROD368BRepair conveyor belt carcass
- PMBPROD369Repair conveyor belt covers
- PMBPROD369ARepair conveyor belt covers
- PMBPROD369BRepair conveyor belt covers
- PMBPROD370Produce injection blow moulded products
- PMBPROD370AProduce injection blow moulded products
- PMBPROD370BProduce injection blow moulded products
- PMBPROD372AProduce fibre optic preforms
- PMBPROD372BProduce fibre optic preforms
- PMBPROD373ADraw optical fibre
- PMBPROD373BDraw optical fibre
- PMBPROD375Vulcanise products using an autoclave
- PMBPROD375AVulcanise products using an autoclave
- PMBPROD375BVulcanise products using an autoclave
- PMBPROD376Splice steel cord conveyor belts
- PMBPROD376ASplice steel cord conveyor belts
- PMBPROD377Splice fabric ply conveyor belts
- PMBPROD377ASplice fabric ply conveyor belts
- PMBPROD378Splice solid woven conveyor belts
- PMBPROD378ASplice solid woven conveyor belts
- PMBPROD380Produce composites using chopper gun/depositor
- PMBPROD380AProduce composites using chopper gun/depositor
- PMBPROD380BProduce composites using chopper gun/depositor
- PMBPROD384Operate multi-axis router
- PMBPROD384AOperate multi-axis router
- PMBPROD385Program computer controlled equipment
- PMBPROD385AProgram computer controlled equipment
- PMBPROD387AProduce welded plastics materials
- PMBPROD387BProduce welded plastics materials
- PMBPROD390Produce composites using filament winding
- PMBPROD390AProduce composites using filament winding
- PMBPROD390BProduce composites using filament winding
- PMBPROD391Produce composites using resin infusion
- PMBPROD391AProduce composites using resin infusion
- PMBPROD391BProduce composites using resin infusion
- PMBPROD392Produce composites using pultrusion
- PMBPROD392AProduce composites using pultrusion
- PMBPROD392BProduce composites using pultrusion
- PMBPROD393Produce composites using vacuum bagging
- PMBPROD393AProduce composites using vacuum bagging
- PMBPROD393BProduce composites using vacuum bagging
- PMBPROD394Produce composites using resin transfer moulding
- PMBPROD394AProduce composites using resin transfer moulding
- PMBPROD394BProduce composites using resin transfer moulding
- PMBPROD395AProduce composite sheet products
- PMBPROD395BProduce composite sheet products
- PMBPROD396AProduce composites using centrifugal casting
- PMBPROD396BProduce composites using centrifugal casting
- PMBPROD397AProduce composites using moulding compounds
- PMBPROD397BProduce composites using moulding compounds
- PMBPROD398Produce composites using pre-pregs
- PMBPROD398AProduce composites using pre-pregs
- PMBPROD398BProduce composites using pre-pregs
- PMBPROD430Trial a new die/tool
- PMBPROD430ATrial a new die/tool
- PMBPROD430BTrial a new die/tool
- PMBPROD431Trial a new, advanced or complex mould
- PMBPROD431ATrial a new, advanced or complex mould
- PMBPROD431BTrial a new, advanced or complex mould
- PMBTECH301Use material and process knowledge to solve problems
- PMBTECH301AUse material and process knowledge to solve problems
- PMBTECH301BUse material and process knowledge to solve problems
- PMBTECH302Modify existing compounds
- PMBTECH302AModify existing compounds
- PMBTECH303Make minor modifications to products
- PMBTECH303AMake minor modifications to products
- PMBTECH401Predict polymer properties and characteristics
- PMBTECH401APredict polymer properties and characteristics
- PMBTECH401BPredict polymer properties and characteristics
- PMBTECH402Set advanced or complex dies
- PMBTECH402ASet up and remove complex dies
- PMBTECH402BSet advanced or complex dies
- PMBTECH403Test fibre-composites materials and laminates
- PMBTECH403ATest fibre-composites materials and laminates
- PMBTECH403BTest fibre-composites materials and laminates
- PMBTECH404Mould chemical resistant and/or fire retardant fibre-composites
- PMBTECH404AMould chemical resistant and/or fire retardant fibre-composites
- PMBTECH404BMould chemical resistant and/or fire retardant fibre-composites
- PMBTECH405Repair damaged fibre-composites structures
- PMBTECH405ARepair damaged fibre-composites structures
- PMBTECH405BRepair damaged fibre-composites structures
- PMBTECH406Diagnose production equipment problems
- PMBTECH406ADiagnose production equipment problems
- PMBTECH501Analyse equipment performance
- PMBTECH501AAnalyse equipment performance
- PMBTECH501BAnalyse equipment performance
- PMBTECH502Review and analyse production trials and specify retrials
- PMBTECH502AReview and analyse production trials and specify retrials
- PMBTECH502BReview and analyse production trials and specify retrials
- PMBTECH503ADetermine rheology and output of plastics materials from processing equipment
- PMBTECH503BDetermine rheology and output of plastics materials from processing equipment
- PMBTECH504ADetermine heat transfer loads for processing equipment
- PMBTECH504BDetermine heat transfer loads for processing equipment
- PMBTECH505Choose polymer materials for an application
- PMBTECH505AChoose polymer materials for an application
- PMBTECH505BChoose polymer materials for an application
- PMBTECH506Analyse the design of products and tools
- PMBTECH506AAnalyse the design of products and tools
- PMBTECH506BAnalyse the design of products and tools
- PMBTECH507Develop fibre-composite products using cored-laminate techniques
- PMBTECH507ADevelop fibre composite products using cored-laminate techniques
- PMBTECH507BDevelop fibre composite products using cored-laminate techniques
- PMBTECH508Develop a new compound
- PMBTECH508ADevelop a new compound
- PMBTECH509Modify an existing product
- PMBTECH509AModify an existing product
- PMBTECH510AAnalyse failure in polymeric materials
- PMBTECH601Develop a new product
- PMBTECH601ADevelop a new product
- PMBTECH601BDevelop a new product
- PMBTECH602Develop a new die or tool
- PMBTECH602ADevelop a new die or tool
- PMBTECH602BDevelop a new die or tool
- PMBTECH603Design structural/mechanical polymer components
- PMBTECH603ADesign structural/mechanical polymer components
- PMBTECH603BDesign structural/mechanical polymer components
- PMBWASTE101BCollect waste for recycling or safe disposal
- PMBWASTE101CCollect waste for recycling or safe disposal
- PMBWASTE302BCoordinate waste disposal
- PMBWASTE302CCoordinate waste disposal
- PMBWELD301Butt weld polyethylene plastic pipelines
- PMBWELD301AButt weld polyethylene plastic pipelines
- PMBWELD301BButt weld polyethylene plastic pipelines
- PMBWELD302Electrofusion weld polyethylene pipelines
- PMBWELD302AElectrofusion weld polyethylene pipelines
- PMBWELD302BElectrofusion weld polyethylene pipelines
- PMBWELD303Install polyethylene (non-pressure) drainage pipelines
- PMBWELD303AInstall polyethylene (non-pressure) drainage pipelines
- PMBWELD303BInstall polyethylene (non-pressure) drainage pipelines
- PMBWELD304Design polyethylene (non-pressure) drainage pipelines
- PMBWELD304ADesign polyethylene (non-pressure) drainage pipelines
- PMBWELD304BDesign polyethylene (non-pressure) drainage pipelines
- PMBWELD305Install polyethylene plastic pressure pipelines
- PMBWELD305AInstall polyethylene plastic pressure pipelines
- PMBWELD305BInstall polyethylene plastic pressure pipelines
- PMBWELD306Design polyethylene plastic pressure pipelines
- PMBWELD306ADesign polyethylene plastic pressure pipelines
- PMBWELD306BDesign polyethylene plastic pressure pipelines
- PMBWELD307Install high temperature plastic pressure pipelines
- PMBWELD307AInstall high temperature plastic pressure pipelines
- PMBWELD307BInstall high temperature plastic pressure pipelines
- PMBWELD308Install PVC plastic pressure pipelines
- PMBWELD308AInstall PVC plastic pressure pipelines
- PMBWELD308BInstall PVC plastic pressure pipelines
- PMBWELD309Weld plastic using extrusion techniques
- PMBWELD309AWeld plastics using extrusion and injection techniques
- PMBWELD309BWeld plastic using extrusion techniques
- PMBWELD310Design PVC plastic pressure pipelines
- PMBWELD310ADesign PVC plastic pressure pipelines
- PMBWELD310BDesign PVC plastic pressure pipelines
- PMBWELD311Design high temperature plastic pressure pipelines
- PMBWELD311ADesign high temperature plastic pressure pipelines
- PMBWELD311BDesign high temperature plastic pressure pipelines
What this list leaves out
Products the register has deleted, cancelled, let lapse or is still re-accrediting. Across the whole register that is 56,180 products; nobody can deliver any of them, so listing them here would be noise. Every one of them still has a page: search for the code and we will read the register live and tell you exactly what it says.
And the one thing no page on this site can show: which RTOs deliver a given product. The national register does not publish that, so we do not have it and we will not estimate it.
This is as far as the register goes. What comes after it, we don't know.
Is any of this sitting on your scope?
The free scope check reads your RTO's live scope from the register and flags every superseded product on it — and every replacement the register calls not equivalent.
Check my scopeSearch all 69,829 products
Background reading: equivalent vs not equivalent, checking a superseded qualification by hand, live scope vs scope history, and the 1,020 of 3,884 RTOs carrying a superseded qualification on live scope.