When must new enrolments into PMB30107 stop?

New enrolments are not permitted from 22 June 2017 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in PMB30107?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

PMB30107 Certificate III in Polymer Processing

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

PMB30107Superseded — equivalentCertificate III in Polymer Processing
equivalent
PMB30116Superseded — equivalentCertificate III in Polymer Processing
equivalent
PMB30121CurrentCertificate III in Polymer Processing

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

PMB30101PMB30107equivalent30 April 2011
The register records this supersession but attaches no note on what changed.
PMB30107PMB30116equivalent21 June 2016
The register records this supersession but attaches no note on what changed.

Is PMB30107 on your scope?

This page is the register's record of one product. What it cannot tell you is whether PMB30107 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What PMB30107 is made of

training.gov.au lists 239 units for PMB30107. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 239 listed

Code	Unit	Core or elective	In this product
FPICOT2206B	Cross cut materials with a hand-held chainsaw	`N/A`	not current
LMTGN2008B	Coordinate work of team or section	`N/A`	not current
MEM03001B	Perform manual production assembly	`N/A`	not current
MEM03006B	Set assembly stations	`N/A`	not current
MEM09002B	Interpret technical drawing	`N/A`	not current
MEM09003B	Prepare basic engineering drawing	`N/A`	not current
MEM11005B	Pick and process order	`N/A`	not current
MEM11006B	Perform production packaging	`N/A`	not current
MEM11007B	Administer inventory procedures	`N/A`	not current
MEM12023A	Perform engineering measurements	`N/A`	not current
MEM13003B	Work safely with industrial chemicals and materials	`N/A`	not current
MEM15001B	Perform basic statistical quality control	`N/A`	not current
MEM15003B	Use improvement processes in team activities	`N/A`	not current
MEM15004B	Perform inspection	`N/A`	not current
MEM16006A	Organise and communicate information	`N/A`	not current
MEM16007A	Work with others in a manufacturing, engineering or related environment	`N/A`	not current
MEM16008A	Interact with computing technology	`N/A`	not current
MEM18001C	Use hand tools	`N/A`	not current
MEM18002B	Use power tools/hand held operations	`N/A`	not current
MSAENV272B	Participate in environmentally sustainable work practices	`N/A`	not current
MSAPMOHS100A	Follow OHS procedures	`N/A`	not current
MSAPMOHS110A	Follow emergency response procedures	`N/A`	not current
MSAPMOHS200A	Work safely	`N/A`	not current
MSAPMOHS205A	Control minor incidents	`N/A`	not current
MSAPMOHS210B	Undertake first response to non-fire incidents	`N/A`	not current
MSAPMOHS212A	Undertake first response to fire incidents	`N/A`	not current
MSAPMOHS216A	Operate breathing apparatus	`N/A`	not current
MSAPMOHS217A	Gas test atmospheres	`N/A`	not current
MSAPMOHS220A	Provide initial First Aid response	`N/A`	current
MSAPMOHS300A	Facilitate the implementation of OHS for a work group	`N/A`	not current

Show the remaining 209 units

Code	Unit	Core or elective	In this product
MSAPMOPS100A	Use equipment	`N/A`	not current
MSAPMOPS101A	Make measurements	`N/A`	not current
MSAPMOPS102A	Perform tasks to support production	`N/A`	not current
MSAPMOPS200A	Operate equipment	`N/A`	not current
MSAPMOPS212A	Use organisation computers or data systems	`N/A`	not current
MSAPMOPS244A	Layout and cut materials	`N/A`	not current
MSAPMOPS363A	Organise on site work	`N/A`	not current
MSAPMPER201A	Monitor and control work permits	`N/A`	not current
MSAPMPER300C	Issue work permits	`N/A`	not current
MSAPMSUP100A	Apply workplace procedures	`N/A`	not current
MSAPMSUP101A	Clean workplace or equipment	`N/A`	not current
MSAPMSUP102A	Communicate in the workplace	`N/A`	not current
MSAPMSUP106A	Work in a team	`N/A`	not current
MSAPMSUP172A	Identify and minimise environmental hazards	`N/A`	not current
MSAPMSUP200A	Achieve work outcomes	`N/A`	not current
MSAPMSUP201A	Receive or despatch goods	`N/A`	current
MSAPMSUP204A	Pack products or materials	`N/A`	not current
MSAPMSUP205A	Transfer loads	`N/A`	not current
MSAPMSUP210A	Process and record information	`N/A`	not current
MSAPMSUP230A	Monitor process operations	`N/A`	not current
MSAPMSUP240A	Undertake minor maintenance	`N/A`	not current
MSAPMSUP273A	Handle goods	`N/A`	not current
MSAPMSUP280A	Manage conflict at work	`N/A`	not current
MSAPMSUP291A	Participate in continuous improvement	`N/A`	not current
MSAPMSUP292A	Sample and test materials and product	`N/A`	not current
MSAPMSUP300A	Identify and implement opportunities to maximise production efficiencies	`N/A`	not current
MSAPMSUP301A	Apply HACCP to the workplace	`N/A`	not current
MSAPMSUP303A	Identify equipment faults	`N/A`	not current
MSAPMSUP309A	Maintain and organise workplace records	`N/A`	not current
MSAPMSUP310A	Contribute to the development of plant documentation	`N/A`	not current
MSAPMSUP330A	Develop and adjust a production schedule	`N/A`	not current
MSAPMSUP382A	Provide coaching/mentoring in the workplace	`N/A`	not current
MSAPMSUP383A	Facilitate a team	`N/A`	not current
MSAPMSUP390A	Use structured problem solving tools	`N/A`	not current
MSL973001A	Perform basic tests	`N/A`	not current
MSS402002A	Sustain process improvements	`N/A`	not current
MSS402020A	Apply quick changeover procedures	`N/A`	not current
MSS402021A	Apply Just in Time procedures	`N/A`	not current
MSS402030A	Apply cost factors to work practices	`N/A`	not current
MSS402040A	Apply 5S procedures	`N/A`	not current
MSS402050A	Monitor process capability	`N/A`	not current
MSS402051A	Apply quality standards	`N/A`	not current
MSS402060A	Use planning software systems in operations	`N/A`	not current
MSS402080A	Undertake root cause analysis	`N/A`	not current
PMBFIN201C	Finish products and components	`N/A`	not current
PMBFIN202C	Fit attachments to products	`N/A`	not current
PMBFIN203C	Repair product imperfections	`N/A`	not current
PMBFIN205C	Hand decorate products	`N/A`	not current
PMBHAN103C	Shift materials safely by hand	`N/A`	not current
PMBHAN208C	Store products	`N/A`	not current
PMBPREP201B	Prepare moulds for composites production	`N/A`	not current
PMBPREP205C	Assemble materials and equipment for production	`N/A`	not current
PMBPREP206C	Prepare materials to formulae	`N/A`	not current
PMBPREP301C	Set up and prepare for production	`N/A`	not current
PMBPREP303C	Set up equipment for continuous operation	`N/A`	not current
PMBPREP304C	Set a die	`N/A`	not current
PMBPREP305B	Change extrusion die and setup	`N/A`	not current
PMBPROD206B	Operate ancillary equipment	`N/A`	not current
PMBPROD207B	Operate calender	`N/A`	not current
PMBPROD209C	Operate cable winding equipment	`N/A`	not current
PMBPROD210B	Operate injection moulding equipment	`N/A`	not current
PMBPROD211B	Operate blow moulding equipment	`N/A`	not current
PMBPROD212B	Operate thermoforming equipment	`N/A`	not current
PMBPROD213B	Operate extruders	`N/A`	not current
PMBPROD216B	Operate blown film equipment	`N/A`	not current
PMBPROD217B	Operate printing equipment	`N/A`	not current
PMBPROD221B	Operate rotational moulding equipment	`N/A`	not current
PMBPROD229B	Operate polystyrene shape moulding equipment	`N/A`	not current
PMBPROD233B	Operate film conversion equipment	`N/A`	not current
PMBPROD235C	Use materials and process knowledge to complete work operations	`N/A`	not current
PMBPROD236C	Operate hand held air/power equipment for production processes	`N/A`	not current
PMBPROD237C	Splice cables	`N/A`	not current
PMBPROD238A	Perform creel rack operations	`N/A`	not current
PMBPROD239A	Build reinforced conveyor belts	`N/A`	not current
PMBPROD240C	Cut materials	`N/A`	not current
PMBPROD241C	Lay up rubber lining or lag pulleys	`N/A`	not current
PMBPROD242A	Bond polymers to surfaces	`N/A`	not current
PMBPROD245C	Fabricate materials	`N/A`	not current
PMBPROD246C	Hand mix materials	`N/A`	not current
PMBPROD247C	Hand lay up composites	`N/A`	not current
PMBPROD248C	Prepare surfaces for coating	`N/A`	not current
PMBPROD249B	Apply liquid surface coatings	`N/A`	not current
PMBPROD251B	Apply gel coat or other polymer surface finish	`N/A`	not current
PMBPROD252C	Operate compounding equipment	`N/A`	not current
PMBPROD253C	Operate an internal mill blender	`N/A`	not current
PMBPROD254C	Operate an open mill blender	`N/A`	not current
PMBPROD255C	Operate mixing equipment	`N/A`	not current
PMBPROD259C	Operate granulating equipment	`N/A`	not current
PMBPROD261B	Operate continuous vulcanising equipment	`N/A`	not current
PMBPROD262B	Operate tyre curing equipment	`N/A`	not current
PMBPROD263B	Operate retread curing equipment	`N/A`	not current
PMBPROD264C	Check recycle wash process	`N/A`	not current
PMBPROD265C	Operate portable vulcanising equipment	`N/A`	not current
PMBPROD266B	Prepare tyre casings for retreading	`N/A`	not current
PMBPROD267B	Operate steel cutting equipment	`N/A`	not current
PMBPROD268B	Operate bead coiling equipment	`N/A`	not current
PMBPROD270B	Operate injection blow moulding equipment	`N/A`	not current
PMBPROD280B	Operate resin-glass depositor equipment	`N/A`	not current
PMBPROD281B	Finish composite products	`N/A`	not current
PMBPROD282B	Assemble mould	`N/A`	not current
PMBPROD283B	Demould product	`N/A`	not current
PMBPROD284B	Operate open flame moulding equipment	`N/A`	not current
PMBPROD285A	Operate computer controlled equipment	`N/A`	not current
PMBPROD287B	Weld plastics materials	`N/A`	not current
PMBPROD290B	Operate filament winding equipment	`N/A`	not current
PMBPROD291B	Operate resin infusion moulding equipment	`N/A`	not current
PMBPROD292B	Operate pultrusion equipment	`N/A`	not current
PMBPROD293B	Operate vacuum bagging equipment	`N/A`	not current
PMBPROD294B	Operate resin transfer moulding equipment	`N/A`	not current
PMBPROD295B	Operate composite sheeting equipment	`N/A`	not current
PMBPROD296B	Operate centrifugal casting equipment	`N/A`	not current
PMBPROD297B	Operate equipment using moulding compounds	`N/A`	not current
PMBPROD298B	Operate equipment using pre-preg material	`N/A`	not current
PMBPROD300B	Produce products	`N/A`	not current
PMBPROD301C	Draw wire	`N/A`	not current
PMBPROD302C	Bunch and strand wire	`N/A`	not current
PMBPROD303C	Lay up and tape cables	`N/A`	not current
PMBPROD304C	Wind products onto drums	`N/A`	not current
PMBPROD305C	Colour optical fibre	`N/A`	not current
PMBPROD306B	Prepare and start equipment for production	`N/A`	not current
PMBPROD307C	Produce calendered products	`N/A`	not current
PMBPROD308B	Take a machine out of production	`N/A`	not current
PMBPROD309C	Produce electroplated products	`N/A`	not current
PMBPROD310C	Produce injection moulded products	`N/A`	not current
PMBPROD311C	Produce blow moulded products	`N/A`	not current
PMBPROD312C	Produce continuous thermoforming products	`N/A`	not current
PMBPROD313C	Produce extruded products	`N/A`	not current
PMBPROD314C	Produce compression moulded products	`N/A`	not current
PMBPROD315C	Produce polyurethane foam	`N/A`	not current
PMBPROD316C	Produce blown film	`N/A`	not current
PMBPROD317C	Print and decorate rigid products	`N/A`	not current
PMBPROD318C	Build first stage tyres	`N/A`	not current
PMBPROD319C	Build up rollers	`N/A`	not current
PMBPROD320C	Produce foam injected mouldings	`N/A`	not current
PMBPROD321B	Produce rotational moulded products	`N/A`	not current
PMBPROD323C	Produce powder coated products	`N/A`	not current
PMBPROD324B	Inspect tyres for retreading	`N/A`	not current
PMBPROD325B	Lay on tyre retreads	`N/A`	not current
PMBPROD326B	Inspect tyres	`N/A`	not current
PMBPROD327B	Produce finished tyres	`N/A`	not current
PMBPROD328C	Produce sheet feed vacuum forming products	`N/A`	not current
PMBPROD329C	Produce polystyrene shape moulded products	`N/A`	not current
PMBPROD330A	Make moulds for formed products	`N/A`	not current
PMBPROD331C	Produce printed and decorated film	`N/A`	not current
PMBPROD332C	Produce thermally bent products	`N/A`	not current
PMBPROD333B	Convert plastic film	`N/A`	not current
PMBPROD334A	Produce products using twin screw extruders	`N/A`	not current
PMBPROD335C	Build second stage tyres	`N/A`	not current
PMBPROD336A	Inspect heavy off-the-road tyres	`N/A`	not current
PMBPROD337A	Prepare heavy off-the-road tyres for repair	`N/A`	not current
PMBPROD338A	Repair heavy off-the-road tyres	`N/A`	not current
PMBPROD339A	Produce reinforced conveyor belts	`N/A`	not current
PMBPROD340A	Cure heavy off-the-road tyre repairs	`N/A`	not current
PMBPROD341A	Finish heavy off-the-road tyre repairs	`N/A`	not current
PMBPROD343C	Shut down plant area	`N/A`	not current
PMBPROD347B	Produce composites using hand lamination	`N/A`	not current
PMBPROD349B	Produce liquid surface coated products	`N/A`	not current
PMBPROD352A	Produce compounded materials	`N/A`	not current
PMBPROD353B	Compound materials using an internal mill blender	`N/A`	not current
PMBPROD354B	Compound materials using an open mill blender	`N/A`	not current
PMBPROD355B	Make pattern/plug for composites moulds	`N/A`	not current
PMBPROD356C	Construct moulds for composite products	`N/A`	not current
PMBPROD357C	Construct jigs and fixtures	`N/A`	not current
PMBPROD358C	Develop patterns	`N/A`	not current
PMBPROD360B	Produce centrifugally cast polyurethane products	`N/A`	not current
PMBPROD362B	Produce gravity cast polyurethane products	`N/A`	not current
PMBPROD367B	Remove and replace conveyor belts	`N/A`	not current
PMBPROD368B	Repair conveyor belt carcass	`N/A`	not current
PMBPROD369B	Repair conveyor belt covers	`N/A`	not current
PMBPROD370B	Produce injection blow moulded products	`N/A`	not current
PMBPROD372B	Produce fibre optic preforms	`N/A`	not current
PMBPROD373B	Draw optical fibre	`N/A`	not current
PMBPROD375B	Vulcanise products using an autoclave	`N/A`	not current
PMBPROD376A	Splice steel cord conveyor belts	`N/A`	not current
PMBPROD377A	Splice fabric ply conveyor belts	`N/A`	not current
PMBPROD378A	Splice solid woven conveyor belts	`N/A`	not current
PMBPROD380B	Produce composites using chopper gun/depositor	`N/A`	not current
PMBPROD384A	Operate multi-axis router	`N/A`	not current
PMBPROD385A	Program computer controlled equipment	`N/A`	not current
PMBPROD387B	Produce welded plastics materials	`N/A`	not current
PMBPROD390B	Produce composites using filament winding	`N/A`	not current
PMBPROD391B	Produce composites using resin infusion	`N/A`	not current
PMBPROD392B	Produce composites using pultrusion	`N/A`	not current
PMBPROD393B	Produce composites using vacuum bagging	`N/A`	not current
PMBPROD394B	Produce composites using resin transfer moulding	`N/A`	not current
PMBPROD395B	Produce composite sheet products	`N/A`	not current
PMBPROD396B	Produce composites using centrifugal casting	`N/A`	not current
PMBPROD397B	Produce composites using moulding compounds	`N/A`	not current
PMBPROD398B	Produce composites using pre-pregs	`N/A`	not current
PMBTECH301B	Use material and process knowledge to solve problems	`N/A`	not current
PMBTECH302A	Modify existing compounds	`N/A`	not current
PMBTECH303A	Make minor modifications to products	`N/A`	not current
PMBWASTE101C	Collect waste for recycling or safe disposal	`N/A`	not current
PMBWASTE302C	Coordinate waste disposal	`N/A`	not current
PMBWELD301B	Butt weld polyethylene plastic pipelines	`N/A`	not current
PMBWELD302B	Electrofusion weld polyethylene pipelines	`N/A`	not current
PMBWELD303B	Install polyethylene (non-pressure) drainage pipelines	`N/A`	not current
PMBWELD304B	Design polyethylene (non-pressure) drainage pipelines	`N/A`	not current
PMBWELD305B	Install polyethylene plastic pressure pipelines	`N/A`	not current
PMBWELD306B	Design polyethylene plastic pressure pipelines	`N/A`	not current
PMBWELD307B	Install high temperature plastic pressure pipelines	`N/A`	not current
PMBWELD308B	Install PVC plastic pressure pipelines	`N/A`	not current
PMBWELD309B	Weld plastic using extrusion techniques	`N/A`	not current
PMBWELD310B	Design PVC plastic pressure pipelines	`N/A`	not current
PMBWELD311B	Design high temperature plastic pressure pipelines	`N/A`	not current
RIIRIS201B	Conduct local risk control	`N/A`	not current
TAEDEL301A	Provide work skill instruction	`N/A`	not current
TLID2010A	Operate a forklift	`N/A`	not current
TLID3011A	Conduct specialised forklift operations	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every PMB training product on the register · Search all training products

Is PMB30107 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.