Where the register points next
training.gov.au points at nothing after PMB30121: it is the current product, and no replacement is listed.
This product is listed on the National Schedule of Training Product Development: under review by Manufacturing Industry Skills Alliance (Polymer Technician and Processing), with submission to the Assurance Body expected by 14 August 2026. That date has passed, so a revised product can reach the register at any time — but submission is not publication, and the record above is still what the register says today.
Source: National Schedule of Training Product Development, training.gov.au (© Commonwealth of Australia), licensed under Creative Commons Attribution 4.0. Excludes the Commonwealth Coat of Arms, trademarks and third-party material. View the Schedule. Schedule read on 25 August 2026 UTC.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is PMB30121 on your scope?
This page is the register's record of one product. What it cannot tell you is whether PMB30121 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What PMB30121 is made of
training.gov.au lists 141 units for PMB30121: 1 core and 140 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 1 listed
| Code | Unit | In this product |
|---|---|---|
| MSS402051 | Apply quality standards | !not current |
Elective units 140 listed
| Code | Unit | In this product |
|---|---|---|
| MEM05050 | Perform routine gas metal arc welding | ●current |
| MEM09002 | Interpret technical drawing | ●current |
| MEM09202A | Produce freehand sketches | !not current |
| MEM11011 | Undertake manual handling | ●current |
| MEM12023 | Perform engineering measurements | ●current |
| MEM12024 | Perform computations | ●current |
| MEM13003 | Work safely with industrial chemicals and materials | ●current |
| MEM13015 | Work safely and effectively in manufacturing and engineering | ●current |
| MEM16006 | Organise and communicate information | ●current |
| MEM30031A | Operate computer-aided design (CAD) system to produce basic drawing elements | !not current |
| MEM30033A | Use computer-aided design (CAD) to create and display 3-D models | !not current |
| MSMENV272 | Participate in environmentally sustainable work practices | ●current |
| MSMOPS100 | Use equipment | ●current |
| MSMOPS101 | Make measurements | ●current |
| MSMOPS102 | Perform tasks to support production | ●current |
| MSMOPS200 | Operate equipment | ●current |
| MSMOPS212 | Use organisation computers or data systems | ●current |
| MSMOPS244 | Lay out and cut materials | ●current |
| MSMOPS363 | Organise on-site work | ●current |
| MSMSUP100 | Apply workplace context to own job | ●current |
| MSMSUP102 | Communicate in the workplace | ●current |
| MSMSUP106 | Work in a team | ●current |
| MSMSUP200 | Achieve work outcomes | ●current |
| MSMSUP210 | Process and record information | ●current |
| MSMSUP240 | Undertake minor maintenance | ●current |
| MSMSUP291 | Participate in continuous improvement | ●current |
| MSMSUP292 | Sample and test materials and product | ●current |
| MSMSUP300 | Identify and apply process improvements | ●current |
| MSMSUP303 | Identify equipment faults | ●current |
| MSMSUP382 | Provide coaching/mentoring in the workplace | ●current |
Show the remaining 110 elective units
| Code | Unit | In this product |
|---|---|---|
| MSMWHS100 | Follow WHS procedures | ●current |
| MSMWHS200 | Work safely | ●current |
| MSS402040 | Apply 5S procedures | !not current |
| PMBFIN201E | Finish components and products | ●current |
| PMBFIN202E | Fit attachments and assemble components for customised polymer products | ●current |
| PMBFIN203E | Rework product imperfections | ●current |
| PMBFIN205E | Hand decorate products | ●current |
| PMBHAN103E | Shift materials safely by hand | ●current |
| PMBPREP201E | Prepare moulds for composites production | ●current |
| PMBPREP205E | Assemble materials and equipment for production | ●current |
| PMBPREP206E | Prepare polymer materials to specified formulae | ●current |
| PMBPREP301E | Set up and prepare for batch production | ●current |
| PMBPREP303E | Set up equipment for continuous operation | ●current |
| PMBPREP304E | Set a die for injection moulding production | ●current |
| PMBPREP305E | Change extrusion die and calibrator | ●current |
| PMBPROD206E | Operate ancillary equipment | ●current |
| PMBPROD207E | Operate rubber calendering equipment | ●current |
| PMBPROD209E | Operate cable winding equipment | ●current |
| PMBPROD210E | Operate injection moulding equipment | ●current |
| PMBPROD213E | Operate polymer extruders | ●current |
| PMBPROD216E | Operate blown film equipment | ●current |
| PMBPROD221E | Operate rotational moulding equipment | ●current |
| PMBPROD235E | Use materials and process knowledge to complete work operations | ●current |
| PMBPROD236E | Operate hand-held air or power equipment for production processes | ●current |
| PMBPROD238E | Perform creel rack operations for belting production | ●current |
| PMBPROD239E | Build fabric-reinforced conveyor belts | ●current |
| PMBPROD241E | Install rubber lining or pulley lagging using lay-up techniques | ●current |
| PMBPROD242E | Bond polymers to surfaces | ●current |
| PMBPROD243E | Cut rubber materials | ●current |
| PMBPROD245E | Fabricate products with rubber or plastics | ●current |
| PMBPROD246E | Hand mix materials | ●current |
| PMBPROD247E | Create composite laminates using hand lay-up techniques | ●current |
| PMBPROD248E | Prepare surfaces for coating | ●current |
| PMBPROD249E | Apply liquid surface coatings | ●current |
| PMBPROD251E | Apply gel coat or other polymer surface finish | ●current |
| PMBPROD252E | Operate polymer compounding equipment | ●current |
| PMBPROD254E | Operate an open mill blender | ●current |
| PMBPROD261E | Operate continuous vulcanising equipment | ●current |
| PMBPROD265E | Operate portable vulcanising equipment | ●current |
| PMBPROD280E | Operate a chopper gun to lay-up composites | ●current |
| PMBPROD281E | Finish composite products | ●current |
| PMBPROD282E | Reassemble production mould components | ●current |
| PMBPROD283E | Demould polymer products | ●current |
| PMBPROD287E | Weld thermoplastics materials | ●current |
| PMBPROD293E | Create composite laminates using vacuum-assisted closed-moulding processes | ●current |
| PMBPROD300E | Produce products | ●current |
| PMBPROD301E | Draw wire | ●current |
| PMBPROD302E | Bunch and strand wire | ●current |
| PMBPROD303E | Produce cable and tape lay-up cables | ●current |
| PMBPROD304E | Wind up wire or belts | ●current |
| PMBPROD306E | Prepare and start equipment for production | ●current |
| PMBPROD307E | Produce calendered rubber or vinyl products | ●current |
| PMBPROD308E | Take a machine out of production | ●current |
| PMBPROD310E | Produce injection moulded products | ●current |
| PMBPROD311E | Produce blow moulded products | ●current |
| PMBPROD313E | Produce extruded polymer products | ●current |
| PMBPROD316E | Produce blown film | ●current |
| PMBPROD321E | Produce rotational moulded products | ●current |
| PMBPROD325E | Lay on tyre retreads | ●current |
| PMBPROD326E | Inspect tyres | ●current |
| PMBPROD328E | Produce sheet-fed vacuum-formed products | ●current |
| PMBPROD330E | Make moulds for thermoformed products | ●current |
| PMBPROD336E | Inspect heavy off-the-road tyres | ●current |
| PMBPROD337E | Prepare heavy off-the-road tyres for repair | ●current |
| PMBPROD338E | Repair heavy off-the-road tyres | ●current |
| PMBPROD339E | Produce steel cord-reinforced conveyor belts | ●current |
| PMBPROD340E | Cure heavy off-the-road tyre repairs | ●current |
| PMBPROD341E | Finish heavy off-the-road tyre repairs | ●current |
| PMBPROD347E | Mould composites products using hand lay-up techniques | ●current |
| PMBPROD352E | Produce compounded materials | ●current |
| PMBPROD355E | Make pattern or plug for composites moulds | ●current |
| PMBPROD356E | Construct moulds for composite products | ●current |
| PMBPROD357E | Construct jigs and fixtures | ●current |
| PMBPROD358E | Develop polymer product patterns | ●current |
| PMBPROD360E | Produce polyurethane products using centrifugal casting | ●current |
| PMBPROD362E | Produce polyurethane products using gravity casting | ●current |
| PMBPROD367E | Remove and replace conveyor belts | ●current |
| PMBPROD368E | Repair conveyor belt carcasses | ●current |
| PMBPROD369E | Repair conveyor belt covers | ●current |
| PMBPROD370E | Produce injection blow moulded products | ●current |
| PMBPROD375E | Vulcanise products using an autoclave | ●current |
| PMBPROD376E | Splice steel cord conveyor belts | ●current |
| PMBPROD377E | Splice fabric ply conveyor belts | ●current |
| PMBPROD378E | Splice solid woven conveyor belts | ●current |
| PMBPROD380E | Produce composites products using mechanised open mould wet lay-up | ●current |
| PMBPROD384E | Operate multi-axis router | ●current |
| PMBPROD385E | Program computer-controlled equipment | ●current |
| PMBPROD390E | Produce composites using filament winding | ●current |
| PMBPROD391E | Produce composites using resin infusion | ●current |
| PMBPROD392E | Produce thermoset composites using pultrusion | ●current |
| PMBPROD393E | Produce composites using vacuum bagging | ●current |
| PMBPROD394E | Produce composites using resin transfer moulding | ●current |
| PMBPROD398E | Produce composites using prepregs | ●current |
| PMBPROD430E | Trial a new injection moulding die | ●current |
| PMBTECH301E | Optimise polymer processing operations | ●current |
| PMBTECH403E | Test thermoset composite laminates and materials | ●current |
| PMBTECH404E | Mould composites with chemically-resistant or fire-retardant properties | ●current |
| PMBTECH405E | Repair damaged fibre-composites structures | ●current |
| PMBTECH407E | Produce composite products using cored-laminate techniques | ●current |
| PMBWELD301E | Join polyethylene plastic pipelines using butt welding | ●current |
| PMBWELD302E | Join polyethylene plastic pipelines using electrofusion welding | ●current |
| PMBWELD303E | Install polyethylene plastic pipelines for non-pressure drainage | ●current |
| PMBWELD304E | Design polyethylene plastic pipelines for non-pressure drainage | ●current |
| PMBWELD305E | Install polyethylene plastic pipelines for pressurised applications | ●current |
| PMBWELD306E | Design polyethylene plastic pipelines for pressurised applications | ●current |
| PMBWELD307E | Install plastic pipelines for high temperature applications | ●current |
| PMBWELD308E | Install PVC plastic pipelines for pressurised applications | ●current |
| PMBWELD309E | Weld plastic using extrusion techniques | ●current |
| PMBWELD310E | Design PVC plastic pipelines for pressure applications | ●current |
| PMBWELD311E | Design plastic pipelines for high temperature and pressure applications | ●current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every PMB training product on the register · Search all training products
Deliver this? We read the register nightly — get the free breakdown of your whole scope, and hear the day PMB30121 or anything else on it is superseded.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.