MSAPMSUP205A Transfer loads

Supersededtraining.gov.au: supersededEquivalent

The currency period for MSAPMSUP205A ended on 31 May 2016 — 10 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 2 June 2017. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Unit of competency
Training package
MSA07 — Manufacturing Training Package
Currency period ends
31 May 2016
Latest release
Release 1 · 11 November 2010
Supersedes
nothing — no earlier product listed
Superseded by
MSMSUP205 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. MSAPMSUP205ASuperseded — equivalentTransfer loads
  2. equivalent
  3. MSMSUP205CurrentTransfer loads

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • MSAPMSUP205AMSMSUP205equivalent1 June 2016

    Supersedes and is equivalent to MSAPMSUP205A Transfer loads

Official documents on the register

What training.gov.au lists for MSAPMSUP205A and for its training package MSA07 (release 8.4), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

Is MSAPMSUP205A on your scope?

This page is the register's record of one product. What it cannot tell you is whether MSAPMSUP205A sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

Where MSAPMSUP205A is used

training.gov.au lists MSAPMSUP205A inside 13 training products, none of them current. Every one of them is below, with the register's own core or elective flag for MSAPMSUP205A in that product.

Products no longer current 13 listed

The register still records MSAPMSUP205A inside these, but it no longer recommends them as current. They are here because a scope history or an old enrolment can still point at them.

CodeTraining productTypeMSAPMSUP205A is
MSA20107Certificate II in Process ManufacturingQualificationelective
MSA30107Certificate III in Process ManufacturingQualificationelective
MSA40311Certificate IV in Process ManufacturingQualificationelective
PMA20108Certificate II in Process Plant OperationsQualificationelective
PMA20113Certificate II in Process Plant OperationsQualificationelective
PMA30108Certificate III in Process Plant OperationsQualificationelective
PMA30113Certificate III in Process Plant OperationsQualificationelective
PMA40108Certificate IV in Process Plant TechnologyQualificationelective
PMA40113Certificate IV in Process Plant TechnologyQualificationelective
PMASS00008Offshore crane driverSkill setelective
Show the remaining 3 products no longer current
CodeTraining productTypeMSAPMSUP205A is
PMB20107Certificate II in Polymer ProcessingQualificationelective
PMB30107Certificate III in Polymer ProcessingQualificationelective
PMB40107Certificate IV in Polymer TechnologyQualificationelective

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every MSA training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is MSAPMSUP205A still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.