When must new enrolments into PMB20107 stop?

New enrolments are not permitted from 22 June 2017 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in PMB20107?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

PMB20107 Certificate II in Polymer Processing

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

PMB20107Superseded — equivalentCertificate II in Polymer Processing
equivalent
PMB20116Superseded — equivalentCertificate II in Polymer Processing
equivalent
PMB20121CurrentCertificate II in Polymer Processing

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

PMB20101PMB20107equivalent30 April 2011
The register records this supersession but attaches no note on what changed.
PMB20107PMB20116equivalent21 June 2016
The register records this supersession but attaches no note on what changed.

Is PMB20107 on your scope?

This page is the register's record of one product. What it cannot tell you is whether PMB20107 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What PMB20107 is made of

training.gov.au lists 120 units for PMB20107. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 120 listed

Code	Unit	Core or elective	In this product
FPICOT2206B	Cross cut materials with a hand-held chainsaw	`N/A`	not current
LMTGN2008B	Coordinate work of team or section	`N/A`	not current
MEM13003B	Work safely with industrial chemicals and materials	`N/A`	not current
MEM16006A	Organise and communicate information	`N/A`	not current
MEM16007A	Work with others in a manufacturing, engineering or related environment	`N/A`	not current
MEM16008A	Interact with computing technology	`N/A`	not current
MEM18001C	Use hand tools	`N/A`	not current
MEM18002B	Use power tools/hand held operations	`N/A`	not current
MSAENV272B	Participate in environmentally sustainable work practices	`N/A`	not current
MSAPMOHS100A	Follow OHS procedures	`N/A`	not current
MSAPMOHS110A	Follow emergency response procedures	`N/A`	not current
MSAPMOHS200A	Work safely	`N/A`	not current
MSAPMOHS205A	Control minor incidents	`N/A`	not current
MSAPMOHS210B	Undertake first response to non-fire incidents	`N/A`	not current
MSAPMOHS212A	Undertake first response to fire incidents	`N/A`	not current
MSAPMOHS216A	Operate breathing apparatus	`N/A`	not current
MSAPMOHS217A	Gas test atmospheres	`N/A`	not current
MSAPMOHS220A	Provide initial First Aid response	`N/A`	current
MSAPMOPS100A	Use equipment	`N/A`	not current
MSAPMOPS101A	Make measurements	`N/A`	not current
MSAPMOPS102A	Perform tasks to support production	`N/A`	not current
MSAPMOPS200A	Operate equipment	`N/A`	not current
MSAPMOPS212A	Use organisation computers or data systems	`N/A`	not current
MSAPMOPS244A	Layout and cut materials	`N/A`	not current
MSAPMPER200C	Work in accordance with an issued permit	`N/A`	not current
MSAPMPER201A	Monitor and control work permits	`N/A`	not current
MSAPMPER205C	Enter confined space	`N/A`	not current
MSAPMSUP100A	Apply workplace procedures	`N/A`	not current
MSAPMSUP101A	Clean workplace or equipment	`N/A`	not current
MSAPMSUP102A	Communicate in the workplace	`N/A`	not current

Show the remaining 90 units

Code	Unit	Core or elective	In this product
MSAPMSUP106A	Work in a team	`N/A`	not current
MSAPMSUP172A	Identify and minimise environmental hazards	`N/A`	not current
MSAPMSUP200A	Achieve work outcomes	`N/A`	not current
MSAPMSUP201A	Receive or despatch goods	`N/A`	current
MSAPMSUP204A	Pack products or materials	`N/A`	not current
MSAPMSUP205A	Transfer loads	`N/A`	not current
MSAPMSUP210A	Process and record information	`N/A`	not current
MSAPMSUP230A	Monitor process operations	`N/A`	not current
MSAPMSUP240A	Undertake minor maintenance	`N/A`	not current
MSAPMSUP273A	Handle goods	`N/A`	not current
MSAPMSUP280A	Manage conflict at work	`N/A`	not current
MSAPMSUP291A	Participate in continuous improvement	`N/A`	not current
MSAPMSUP292A	Sample and test materials and product	`N/A`	not current
MSS402002A	Sustain process improvements	`N/A`	not current
MSS402020A	Apply quick changeover procedures	`N/A`	not current
MSS402021A	Apply Just in Time procedures	`N/A`	not current
MSS402030A	Apply cost factors to work practices	`N/A`	not current
MSS402040A	Apply 5S procedures	`N/A`	not current
MSS402050A	Monitor process capability	`N/A`	not current
MSS402051A	Apply quality standards	`N/A`	not current
MSS402060A	Use planning software systems in operations	`N/A`	not current
MSS402080A	Undertake root cause analysis	`N/A`	not current
PMBFIN201C	Finish products and components	`N/A`	not current
PMBFIN202C	Fit attachments to products	`N/A`	not current
PMBFIN203C	Repair product imperfections	`N/A`	not current
PMBFIN205C	Hand decorate products	`N/A`	not current
PMBHAN103C	Shift materials safely by hand	`N/A`	not current
PMBHAN208C	Store products	`N/A`	not current
PMBPREP201B	Prepare moulds for composites production	`N/A`	not current
PMBPREP205C	Assemble materials and equipment for production	`N/A`	not current
PMBPREP206C	Prepare materials to formulae	`N/A`	not current
PMBPROD206B	Operate ancillary equipment	`N/A`	not current
PMBPROD207B	Operate calender	`N/A`	not current
PMBPROD209C	Operate cable winding equipment	`N/A`	not current
PMBPROD210B	Operate injection moulding equipment	`N/A`	not current
PMBPROD211B	Operate blow moulding equipment	`N/A`	not current
PMBPROD212B	Operate thermoforming equipment	`N/A`	not current
PMBPROD213B	Operate extruders	`N/A`	not current
PMBPROD216B	Operate blown film equipment	`N/A`	not current
PMBPROD217B	Operate printing equipment	`N/A`	not current
PMBPROD221B	Operate rotational moulding equipment	`N/A`	not current
PMBPROD229B	Operate polystyrene shape moulding equipment	`N/A`	not current
PMBPROD233B	Operate film conversion equipment	`N/A`	not current
PMBPROD235C	Use materials and process knowledge to complete work operations	`N/A`	not current
PMBPROD236C	Operate hand held air/power equipment for production processes	`N/A`	not current
PMBPROD237C	Splice cables	`N/A`	not current
PMBPROD238A	Perform creel rack operations	`N/A`	not current
PMBPROD239A	Build reinforced conveyor belts	`N/A`	not current
PMBPROD240C	Cut materials	`N/A`	not current
PMBPROD241C	Lay up rubber lining or lag pulleys	`N/A`	not current
PMBPROD242A	Bond polymers to surfaces	`N/A`	not current
PMBPROD245C	Fabricate materials	`N/A`	not current
PMBPROD246C	Hand mix materials	`N/A`	not current
PMBPROD247C	Hand lay up composites	`N/A`	not current
PMBPROD248C	Prepare surfaces for coating	`N/A`	not current
PMBPROD249B	Apply liquid surface coatings	`N/A`	not current
PMBPROD251B	Apply gel coat or other polymer surface finish	`N/A`	not current
PMBPROD252C	Operate compounding equipment	`N/A`	not current
PMBPROD253C	Operate an internal mill blender	`N/A`	not current
PMBPROD254C	Operate an open mill blender	`N/A`	not current
PMBPROD255C	Operate mixing equipment	`N/A`	not current
PMBPROD259C	Operate granulating equipment	`N/A`	not current
PMBPROD261B	Operate continuous vulcanising equipment	`N/A`	not current
PMBPROD262B	Operate tyre curing equipment	`N/A`	not current
PMBPROD263B	Operate retread curing equipment	`N/A`	not current
PMBPROD264C	Check recycle wash process	`N/A`	not current
PMBPROD265C	Operate portable vulcanising equipment	`N/A`	not current
PMBPROD266B	Prepare tyre casings for retreading	`N/A`	not current
PMBPROD267B	Operate steel cutting equipment	`N/A`	not current
PMBPROD268B	Operate bead coiling equipment	`N/A`	not current
PMBPROD270B	Operate injection blow moulding equipment	`N/A`	not current
PMBPROD280B	Operate resin-glass depositor equipment	`N/A`	not current
PMBPROD281B	Finish composite products	`N/A`	not current
PMBPROD282B	Assemble mould	`N/A`	not current
PMBPROD283B	Demould product	`N/A`	not current
PMBPROD284B	Operate open flame moulding equipment	`N/A`	not current
PMBPROD285A	Operate computer controlled equipment	`N/A`	not current
PMBPROD287B	Weld plastics materials	`N/A`	not current
PMBPROD290B	Operate filament winding equipment	`N/A`	not current
PMBPROD291B	Operate resin infusion moulding equipment	`N/A`	not current
PMBPROD292B	Operate pultrusion equipment	`N/A`	not current
PMBPROD293B	Operate vacuum bagging equipment	`N/A`	not current
PMBPROD294B	Operate resin transfer moulding equipment	`N/A`	not current
PMBPROD295B	Operate composite sheeting equipment	`N/A`	not current
PMBPROD296B	Operate centrifugal casting equipment	`N/A`	not current
PMBPROD297B	Operate equipment using moulding compounds	`N/A`	not current
PMBPROD298B	Operate equipment using pre-preg material	`N/A`	not current
PMBWASTE101C	Collect waste for recycling or safe disposal	`N/A`	not current
RIIRIS201B	Conduct local risk control	`N/A`	not current
TLID2010A	Operate a forklift	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every PMB training product on the register · Search all training products

Is PMB20107 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.