MSAPMPER200C Work in accordance with an issued permit

Supersededtraining.gov.au: supersededEquivalent

The currency period for MSAPMPER200C ended on 13 December 2015 — 10 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 15 December 2016 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Unit of competency
Training package
MSA07 — Manufacturing Training Package
Currency period ends
13 December 2015
Latest release
Release 1 · 11 November 2010
Supersedes
MSAPMPER200B
Superseded by
MSMPER200 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. MSAPMPER200CSuperseded — equivalentWork in accordance with an issued permit
  2. equivalent
  3. MSMPER200CurrentWork in accordance with an issued permit

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • MSAPMPER200BMSAPMPER200Cequivalent10 November 2010

    Equivalent. Updated to comply with revised AS 2685.

  • MSAPMPER200CMSMPER200equivalent14 December 2015

    Supersedes and is equivalent to MSAPMPER200C Work in accordance with an issued permit

Is MSAPMPER200C on your scope?

This page is the register's record of one product. What it cannot tell you is whether MSAPMPER200C sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

Where MSAPMPER200C is used

training.gov.au lists MSAPMPER200C inside 37 training products, none of them current. Every one of them is below, with the register's own core or elective flag for MSAPMPER200C in that product.

Products no longer current 37 listed

The register still records MSAPMPER200C inside these, but it no longer recommends them as current. They are here because a scope history or an old enrolment can still point at them.

CodeTraining productTypeMSAPMPER200C is
FDFSS00004Confined SpaceSkill setcore
MAR30116Certificate III in Maritime Operations (Integrated Rating)Qualificationcore
MAR40116Certificate IV in Maritime Operations (Chief Integrated Rating)Qualificationcore
MSA20107Certificate II in Process ManufacturingQualificationelective
MSA30107Certificate III in Process ManufacturingQualificationelective
MSA30309Certificate III in Surface Preparation and Coating ApplicationQualificationelective
MSA40311Certificate IV in Process ManufacturingQualificationelective
MSASS00001Confined space work teamSkill setelective
MSASS00002High pressure water jetting assistantSkill setelective
MSASS00003High pressure water jetting operatorSkill setelective
Show the remaining 27 products no longer current
CodeTraining productTypeMSAPMPER200C is
MSF31113Certificate III in Cabinet MakingQualificationelective
PMA20108Certificate II in Process Plant OperationsQualificationelective
PMA20113Certificate II in Process Plant OperationsQualificationelective
PMA30108Certificate III in Process Plant OperationsQualificationelective
PMA30113Certificate III in Process Plant OperationsQualificationelective
PMA40108Certificate IV in Process Plant TechnologyQualificationelective
PMA40113Certificate IV in Process Plant TechnologyQualificationelective
PMASS00001Confined space work teamSkill setelective
PMASS00002Contractor inductionSkill setelective
PMASS00004Hot work observerSkill setelective
PMASS00007Incident response team memberSkill setelective
PMASS00009Offshore incident response team memberSkill setelective
PMB20107Certificate II in Polymer ProcessingQualificationelective
PMB40107Certificate IV in Polymer TechnologyQualificationelective
PMC20110Certificate II in Manufactured Mineral ProductsQualificationelective
PMC30110Certificate III in Manufactured Mineral ProductsQualificationelective
PMC40110Certificate IV in Manufactured Mineral ProductsQualificationelective
RII21113Certificate II in Drilling Oil/Gas (On shore)Qualificationelective
RII21115Certificate II in Drilling Oil/Gas (On shore)Qualificationelective
RII21213Certificate II in Well Servicing OperationsQualificationelective
RII21215Certificate II in Well Servicing OperationsQualificationelective
RII32015Certificate III in Drilling Oil/Gas (On shore)Qualificationelective
RII32213Certificate III in Well Servicing OperationsQualificationcore
RII32215Certificate III in Well Servicing OperationsQualificationcore
UEG20114Certificate II in Gas Supply Industry OperationsQualificationelective
UEG30114Certificate III in Gas Supply Industry OperationsQualificationelective
UEG40114Certificate IV in Gas Supply Industry OperationsQualificationelective

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every MSA training product on the register · Search all training products

Is MSAPMPER200C still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.