UEG20114 Certificate II in Gas Supply Industry Operations

Supersededtraining.gov.au: supersededEquivalent

The currency period for UEG20114 ended on 3 September 2018 — 7 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 5 September 2019 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
UEG11 — Gas Industry Training Package
Currency period ends
3 September 2018
Latest release
Release 1 · 13 March 2014
Supersedes
UEG20411, UEG20211, UEG20311, UEG20511
Superseded by
UEG20118 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. UEG20114Superseded — equivalentCertificate II in Gas Supply Industry Operations
  2. equivalent
  3. UEG20118Superseded — equivalentCertificate II in Gas Supply Industry Operations
  4. equivalent
  5. UEG20120Superseded — equivalentCertificate II in Gas Supply Industry Operations
  6. equivalent
  7. UEG20121Superseded — equivalentCertificate II in Gas Supply Industry Operations
  8. equivalent
  9. UEG20122CurrentCertificate II in Gas Supply Industry Operations

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • UEG20211UEG20114not equivalent12 March 2014

    The register records this supersession but attaches no note on what changed.

  • UEG20311UEG20114not equivalent12 March 2014

    The register records this supersession but attaches no note on what changed.

  • UEG20411UEG20114not equivalent12 March 2014

    The register records this supersession but attaches no note on what changed.

  • UEG20511UEG20114not equivalent12 March 2014

    The register records this supersession but attaches no note on what changed.

  • UEG20114UEG20118equivalent4 September 2018

    The register records this supersession but attaches no note on what changed.

Is UEG20114 on your scope?

This page is the register's record of one product. What it cannot tell you is whether UEG20114 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What UEG20114 is made of

training.gov.au lists 88 units for UEG20114: 4 core and 84 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 4 listed

CodeUnitIn this product
UEGNSG005APrepare to work in the gas industrynot current
UEGNSG132ACarry out basic work activities in a gas industry work environmentnot current
UEGNSG140AApply environmental policies and procedures in the utilities industrynot current
UEGNSG141AApply Workplace Health and Safety regulations, codes and practices in the gas supply industrynot current

Elective units 84 listed

CodeUnitIn this product
CPCCLDG3001ALicence to perform doggingnot current
CPCCLRG3001ALicence to perform rigging basic levelnot current
CPCCOHS1001AWork safely in the construction industrynot current
CPPFES2005ADemonstrate first attack firefighting equipmentnot current
HLTAID001Provide cardiopulmonary resuscitationnot current
HLTAID003Provide first aidnot current
HLTAID005Provide first aid in remote situationsnot current
HLTHSE204DFollow safe manual handling practicesnot current
MEM05004CPerform routine oxy acetylene weldingnot current
MEM05012CPerform routine manual metal arc weldingnot current
MSAPMOHS110AFollow emergency response proceduresnot current
MSAPMOHS205AControl minor incidentsnot current
MSAPMOHS216AOperate breathing apparatusnot current
MSAPMOHS217AGas test atmospheresnot current
MSAPMPER200CWork in accordance with an issued permitnot current
MSAPMPER201AMonitor and control work permitsnot current
MSAPMPER202AObserve permit worknot current
MSAPMSUP210AProcess and record informationnot current
MSAPMSUP240AUndertake minor maintenancenot current
MSS402061AUse SCADA systems in operationsnot current
PMAOHS211BPrepare equipment for emergency responsenot current
PMAOMIR210BControl evacuation to muster pointnot current
RIICCM205DCarry out manual excavationnot current
RIICCM206DSupport plant operationsnot current
RIICCM207DSpread and compact materials manuallynot current
RIICCM208DCarry out basic levellingnot current
RIICCM210DInstall trench supportnot current
RIICRC208DLay pipesnot current
RIIMPO308DConduct tracked dozer operationsnot current
RIIMPO318DConduct civil construction skid steer loader operationsnot current
Show the remaining 54 elective units
CodeUnitIn this product
RIISAM201DHandle resources and infrastructure materials and safely dispose of nontoxic materialsnot current
RIIWHS202DEnter and work in confined spacesnot current
RIIWHS204DWork safely at heightsnot current
RIIWHS205DControl traffic with stop-slow batnot current
RIIWMG203DDrain and dewater civil construction sitenot current
TLIB2004ACarry out vehicle inspectionnot current
TLIC2002ADrive light rigid vehiclenot current
TLIC2025AOperate four wheel drive vehiclenot current
TLIC3003ADrive medium rigid vehiclenot current
TLIC3004ADrive heavy rigid vehiclenot current
TLIC3005ADrive heavy combination vehiclenot current
TLID2003AHandle dangerous goods/hazardous substancesnot current
TLID2010AOperate a forkliftnot current
TLID2016ALoad and unload explosives and dangerous goodsnot current
TLID3033AOperate a vehicle-mounted loading cranenot current
TLIF2006AApply accident-emergency proceduresnot current
TLIF2010AApply fatigue management strategiesnot current
TLIF2012AApply safe procedures when handling/transporting dangerous goods or explosivesnot current
TLILIC0012ALicence to operate a vehicle loading crane (capacity 10 metre tonnes and above)not current
TLILIC2001ALicence to operate a forklift trucknot current
TLILIC2014BLicence to drive a light rigid vehiclenot current
TLILIC2015BLicence to drive a medium rigid vehiclenot current
TLILIC2016BLicence to drive a heavy rigid vehiclenot current
TLILIC3017BLicence to drive a heavy combination vehiclenot current
UEENEEC001BMaintain documentationnot current
UEENEED101AUse computer applications relevant to a workplacenot current
UEENEEE102AFabricate, assemble and dismantle utilities industry componentsnot current
UEENEEE107AUse drawings, diagrams, schedules, standards, codes and specificationsnot current
UEENEEM080AReport on the integrity of explosion-protected equipment in a hazardous areanot current
UEGNSG004ALocate, prove and protect utility assetsnot current
UEGNSG006AUse a portable gas detector to locate escapenot current
UEGNSG134AEstablish a utilities infrastructure work sitenot current
UEGNSG136ACarry out transmission pipeline construction work activitiesnot current
UEGNSG219AConduct excavations in the utilities industrynot current
UEGNSG221AFirst on site response to gas pipeline emergenciesnot current
UEGNSG224AConstruct and lay copper and stainless steel gas distribution pipelinesnot current
UEGNSG226AAssist with the construction, laying and connection of gas distribution services to mainsnot current
UEGNSG227AAssist with the construction and laying of gas distribution mainsnot current
UEGNSG330ACoat Metallic Pipelinesnot current
UEGNSG331AEstablish right of way access for transmission pipeline constructionnot current
UEGNSG332AUndertake hydro-testing for transmission pipeline constructionnot current
UEGNSG333AWork in proximity of transmission pipeline construction plant and equipmentnot current
UEGNSG342AMaintain pipeline easementsnot current
UEGNSG615AFill LPG cylindersnot current
UEGNSG616ARefurbish gas cylindersnot current
UEGNSG705ADisconnect and reconnect small capacity gas metersnot current
UEGNSG708APressure Test Residential and Small Commercial Gas Installationsnot current
UEGNSG711AProcess meter reading information using appropriate technologynot current
UEGNSG712ARead and record meter readingsnot current
UEGNSG714ARelight Type A gas appliancesnot current
UEGNSG804AMaintain Single Stage and Single Run Gas Flow and Pressure Control and Measuring Devicesnot current
UEPOPS203BOperate and monitor communications systemnot current
UEPOPS205BConduct minor mechanical maintenancenot current
UETTDREL14AWorking safely near live electrical apparatus as a non-electrical workernot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UEG training product on the register · Search all training products

Is UEG20114 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.