Where the register points next
training.gov.au points at nothing after UEG20122: it is the current product, and no replacement is listed.
This product is listed on the National Schedule of Training Product Development: under review by Powering Skills Organisation (UEG Full Training Product Review), expected submission to the Assurance Body 1 March 2028. That is a submission date, not a supersession date: assurance, endorsement and publication follow, so a new version can only reach the register after it.
Source: National Schedule of Training Product Development, training.gov.au (© Commonwealth of Australia), licensed under Creative Commons Attribution 4.0. Excludes the Commonwealth Coat of Arms, trademarks and third-party material. View the Schedule. Schedule read on 29 September 2026 UTC.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Official documents on the register
What training.gov.au lists for UEG20122 and for its training package UEG (release 4.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.
Is UEG20122 on your scope?
This page is the register's record of one product. What it cannot tell you is whether UEG20122 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What UEG20122 is made of
training.gov.au lists 52 units for UEG20122: 4 core and 48 elective. To complete it, the register publishes a rule of 4 core units plus 8 electives — 12 units in all.
●UEG20122 lists 4 units the register no longer recommends as current, and it publishes a replacement for every one of them. None is deleted without a way forward.
Core units 4 listed
| Code | Unit | In this product |
|---|---|---|
| UEGNSG002 | Apply environmental policies and procedures in the gas supply industry | ●current |
| UEGNSG031 | Prepare to work in the gas industry | ●current |
| UEGNSG033 | Carry out basic work activities in a gas industry work environment | ●current |
| UEGNSG041 | Apply safe working practices in the gas supply industry | ●current |
Elective units 48 listed
| Code | Unit | In this product |
|---|---|---|
| CPCWHS1001 | Prepare to work safely in the construction industry | ●current |
| HLTAID009 | Provide cardiopulmonary resuscitation | ●current |
| HLTAID011 | Provide First Aid | ●current |
| HLTAID013 | Provide First Aid in remote or isolated site | ●current |
| HLTWHS005 | Conduct manual tasks safely | ●current |
| ICTICT214 | Operate application software packages | ●current |
| MSMPER200 | Work in accordance with an issued permit | ●current |
| MSMPER202 | Observe permit work | ●current |
| MSMSUP210 | Process and record information | ●current |
| MSMSUP240 | Undertake minor maintenance | ●current |
| MSMWHS212 | Undertake first response to fire incidents | ●current |
| MSMWHS217 | Gas test atmospheres | ●current |
| RIICCM205F | Carry out manual excavation | ●current |
| RIICCM206E | Support plant operations | !not current |
| RIICCM207E | Spread and compact materials manually | ●current |
| RIICCM208E | Carry out basic levelling | !not current |
| RIIWHS202E | Enter and work in confined spaces | !not current |
| RIIWHS204E | Work safely at heights | !not current |
| TLIB0002 | Carry out vehicle inspection | ●current |
| TLID0014 | Load and unload explosives/dangerous goods | ●current |
| TLID0016 | Operate a forklift | ●current |
| TLID0021 | Store and handle dangerous goods and hazardous substances | ●current |
| TLIF2012 | Apply safe procedures when handling/transporting dangerous goods or explosives | ●current |
| UEECO0002 | Maintain documentation | ●current |
| UEGNSG008 | Assist with the construction and laying of gas distribution mains | ●current |
| UEGNSG009 | Assist with the construction, laying and connection of gas distribution services to mains | ●current |
| UEGNSG010 | Conduct general excavations | ●current |
| UEGNSG016 | Establish right of way access and maintain transmission pipeline easement | ●current |
| UEGNSG017 | Fill by weight industrial gas cylinders | ●current |
| UEGNSG018 | First on site response to gas pipeline emergencies | ●current |
Show the remaining 18 elective units
| Code | Unit | In this product |
|---|---|---|
| UEGNSG019 | Inspect, test and maintain gas cylinders | ●current |
| UEGNSG024 | Monitor and control the transfer of bulk industrial gas | ●current |
| UEGNSG040 | Use a portable detector to locate a combustible gas escape | ●current |
| UEGNSG042 | Pressure test residential and small commercial gas installations | ●current |
| UEGNSG043 | Relight Type A gas appliances | ●current |
| UEGNSG052 | Establish a utilities infrastructure worksite | ●current |
| UEGNSG058 | Locate, prove and protect utility assets | ●current |
| UEGNSG101 | Undertake gas leak surveys | ●current |
| UEGNSG203 | Evaluate and extinguish gas fire | ●current |
| UEGNSG316 | Work in proximity of transmission pipeline construction plant and equipment | ●current |
| UEGNSG317 | First response to a gas facility event | ●current |
| UEGNSG702 | Disconnect and reconnect small capacity gas meters | ●current |
| UEGNSG709 | Process meter reading information using appropriate technology | ●current |
| UEGNSG710 | Read and record meter readings | ●current |
| UEGNSG715 | Use data logging equipment | ●current |
| UEGNSG901 | Apply safety practices, procedures, and compliance standards for handling hydrogen gas | ●current |
| UEPOPS085 | Operate and monitor communications system | ●current |
| UETDREL006 | Work safely in the vicinity of live electrical apparatus as a non-electrical worker | ●current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every UEG training product on the register · Search all training products
Take this with you — one email confirming UEG20122 is current on the register today, and what starts the clock if it is ever superseded. Nothing scheduled after it.
No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.
Deliver this? We read the register nightly — get the free breakdown of your whole scope, and, if you tick the watch below, an email when something on it approaches the date new enrolments stop or changes what you have to do.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.