UEG20121 Certificate II in Gas Supply Industry Operations

Supersededtraining.gov.au: supersededEquivalent

The currency period for UEG20121 ended on 7 December 2022 — 3 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 9 December 2023 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
UEG — Gas Industry Training Package
Currency period ends
7 December 2022
Latest release
Release 1 · 23 November 2021
Supersedes
UEG20120
Superseded by
UEG20122 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. UEG20121Superseded — equivalentCertificate II in Gas Supply Industry Operations
  2. equivalent
  3. UEG20122CurrentCertificate II in Gas Supply Industry Operations

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • UEG20120UEG20121equivalent22 November 2021

    The register records this supersession but attaches no note on what changed.

  • UEG20121UEG20122equivalent8 December 2022

    The register records this supersession but attaches no note on what changed.

Is UEG20121 on your scope?

This page is the register's record of one product. What it cannot tell you is whether UEG20121 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What UEG20121 is made of

training.gov.au lists 90 units for UEG20121: 4 core and 86 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 4 listed

CodeUnitIn this product
UEGNSG005Prepare to work in the gas industrynot current
UEGNSG132Carry out basic work activities in a gas industry work environmentnot current
UEGNSG140Apply environmental policies and procedures in the utilities industrynot current
UEGNSG141Apply workplace health and safety regulations, codes and practices in the gas supply industrynot current

Elective units 86 listed

CodeUnitIn this product
CPCCLDG3001Licence to perform doggingcurrent
CPCCLRG3001Licence to perform rigging basic levelcurrent
CPCCWHS1001Prepare to work safely in the construction industrynot current
CPPFES2005Demonstrate first attack firefighting equipmentcurrent
HLTAID009Provide cardiopulmonary resuscitationcurrent
HLTAID011Provide First Aidcurrent
HLTAID013Provide First Aid in remote or isolated sitecurrent
HLTWHS005Conduct manual tasks safelycurrent
ICTICT214Operate application software packagescurrent
MSMPER200Work in accordance with an issued permitcurrent
MSMPER201Monitor and control work permitscurrent
MSMPER202Observe permit workcurrent
MSMSUP210Process and record informationcurrent
MSMSUP240Undertake minor maintenancecurrent
MSMWHS110Follow emergency response procedurescurrent
MSMWHS205Control minor incidentscurrent
MSMWHS216Operate breathing apparatuscurrent
MSMWHS217Gas test atmospherescurrent
MSS402061Use SCADA systems in operationsnot current
PMAOMIR210Control evacuation to muster pointcurrent
PMAOPS223Operate and monitor valve systemscurrent
PMAWHS211Prepare equipment for emergency responsecurrent
RIICCM205FCarry out manual excavationcurrent
RIICCM206ESupport plant operationscurrent
RIICCM207ESpread and compact materials manuallycurrent
RIICCM208ECarry out basic levellingcurrent
RIICCM210EInstall trench supportcurrent
RIICRC208ELay pipescurrent
RIIMPO308FConduct tracked dozer operationscurrent
RIIMPO318FConduct civil construction skid steer loader operationscurrent
Show the remaining 56 elective units
CodeUnitIn this product
RIISAM201EHandle resources and infrastructure materials and safely dispose of nontoxic materialscurrent
RIIWHS202EEnter and work in confined spacescurrent
RIIWHS204EWork safely at heightscurrent
RIIWHS205EControl traffic with stop-slow batcurrent
RIIWMG203EDrain and dewater civil construction sitescurrent
TLIB0002Carry out vehicle inspectioncurrent
TLIC2002Drive light rigid vehiclecurrent
TLIC2025Operate four wheel drive vehiclenot current
TLIC3003Drive medium rigid vehiclecurrent
TLIC3004Drive heavy rigid vehiclecurrent
TLIC3005Drive heavy combination vehiclecurrent
TLID0012Operate a vehicle-mounted loading cranecurrent
TLID2003Handle dangerous goods/hazardous substancesnot current
TLID2010Operate a forkliftnot current
TLID2016Load and unload explosives/dangerous goodsnot current
TLIF2006Apply accident-emergency procedurescurrent
TLIF2010Apply fatigue management strategiescurrent
TLIF2012Apply safe procedures when handling/transporting dangerous goods or explosivescurrent
TLILIC0002Licence to operate a vehicle loading crane (capacity 10 metre tonnes and above)not current
TLILIC0003Licence to operate a forklift truckcurrent
TLILIC2014Licence to drive a light rigid vehiclecurrent
TLILIC2015Licence to drive a medium rigid vehiclecurrent
TLILIC2016Licence to drive a heavy rigid vehiclecurrent
TLILIC3017Licence to drive a heavy combination vehiclecurrent
UEECD0007Apply work health and safety regulations, codes and practices in the workplacecurrent
UEECD0019Fabricate, assemble and dismantle utilities industry componentscurrent
UEECD0051Use drawings, diagrams, schedules, standards, codes and specificationscurrent
UEECO0002Maintain documentationcurrent
UEGNSG004Locate, prove and protect utility assetsnot current
UEGNSG006Use a portable gas detector to locate escapenot current
UEGNSG101Undertake gas leak surveyscurrent
UEGNSG134Establish a utilities infrastructure work sitenot current
UEGNSG203Evaluate and extinguish gas firecurrent
UEGNSG206Construct and lay copper and stainless steel gas distribution pipelinescurrent
UEGNSG219Conduct excavations in the utilities industrynot current
UEGNSG226Assist with the construction, laying and connection of gas distribution services to mainsnot current
UEGNSG227Assist with the construction and laying of gas distribution mainsnot current
UEGNSG230First on site response to gas pipeline emergenciesnot current
UEGNSG303Carry out transmission pipeline construction work activitiescurrent
UEGNSG316Work in proximity of transmission pipeline construction plant and equipmentcurrent
UEGNSG330Coat metallic pipelinesnot current
UEGNSG331Establish right of way access for transmission pipeline constructionnot current
UEGNSG342Maintain pipeline easementsnot current
UEGNSG615Fill LPG cylindersnot current
UEGNSG616Refurbish gas cylindersnot current
UEGNSG702Disconnect and reconnect small capacity gas meterscurrent
UEGNSG708Pressure test residential and small commercial gas installationsnot current
UEGNSG709Process meter reading information using appropriate technologycurrent
UEGNSG710Read and record meter readingscurrent
UEGNSG714Relight Type A gas appliancesnot current
UEGNSG715Use data logging equipmentcurrent
UEGNSG804Maintain single stage and single run gas flow and pressure control and measuring devicesnot current
UEGNSG901Apply safety practices, procedures, and compliance standards for handling hydrogen gascurrent
UEPOPS203Operate and monitor communications systemnot current
UEPOPS205Conduct minor mechanical maintenancenot current
UETTDREL14Working safely near live electrical apparatus as a non-electrical workernot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UEG training product on the register · Search all training products

Is UEG20121 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.