Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
- UEG20118Superseded — equivalentCertificate II in Gas Supply Industry Operations
- =equivalent
- UEG20120Superseded — equivalentCertificate II in Gas Supply Industry Operations
- =equivalent
- UEG20121Superseded — equivalentCertificate II in Gas Supply Industry Operations
- =equivalent
- UEG20122CurrentCertificate II in Gas Supply Industry Operations
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is UEG20118 on your scope?
This page is the register's record of one product. What it cannot tell you is whether UEG20118 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What UEG20118 is made of
training.gov.au lists 93 units for UEG20118: 4 core and 89 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 4 listed
| Code | Unit | In this product |
|---|---|---|
| UEGNSG005 | Prepare to work in the gas industry | !not current |
| UEGNSG132 | Carry out basic work activities in a gas industry work environment | !not current |
| UEGNSG140 | Apply environmental policies and procedures in the utilities industry | !not current |
| UEGNSG141 | Apply workplace health and safety regulations, codes and practices in the gas supply industry | !not current |
Elective units 89 listed
| Code | Unit | In this product |
|---|---|---|
| CPCCLDG3001A | Licence to perform dogging | !not current |
| CPCCLRG3001A | Licence to perform rigging basic level | !not current |
| CPCCWHS1001 | Prepare to work safely in the construction industry | !not current |
| CPPFES2005A | Demonstrate first attack firefighting equipment | !not current |
| HLTAID001 | Provide cardiopulmonary resuscitation | !not current |
| HLTAID003 | Provide first aid | !not current |
| HLTAID005 | Provide first aid in remote situations | !not current |
| HLTWHS005 | Conduct manual tasks safely | ●current |
| MEM05004C | Perform routine oxy acetylene welding | !not current |
| MEM05012C | Perform routine manual metal arc welding | !not current |
| MEM07001B | Perform operational maintenance of machines/equipment | !not current |
| MSMPER200 | Work in accordance with an issued permit | ●current |
| MSMPER201 | Monitor and control work permits | ●current |
| MSMPER202 | Observe permit work | ●current |
| MSMSUP210 | Process and record information | ●current |
| MSMSUP240 | Undertake minor maintenance | ●current |
| MSMWHS110 | Follow emergency response procedures | ●current |
| MSMWHS205 | Control minor incidents | ●current |
| MSMWHS216 | Operate breathing apparatus | ●current |
| MSMWHS217 | Gas test atmospheres | ●current |
| MSS402061 | Use SCADA systems in operations | !not current |
| PMAOMIR210 | Control evacuation to muster point | ●current |
| PMAOPS201B | Operate fluid flow equipment | !not current |
| PMAWHS211 | Prepare equipment for emergency response | ●current |
| RIICCM205E | Carry out manual excavation | !not current |
| RIICCM206D | Support plant operations | !not current |
| RIICCM207D | Spread and compact materials manually | !not current |
| RIICCM208D | Carry out basic levelling | !not current |
| RIICCM210D | Install trench support | !not current |
| RIICRC208D | Lay pipes | !not current |
Show the remaining 59 elective units
| Code | Unit | In this product |
|---|---|---|
| RIIMPO308E | Conduct tracked dozer operations | !not current |
| RIIMPO318E | Conduct civil construction skid steer loader operations | !not current |
| RIISAM201D | Handle resources and infrastructure materials and safely dispose of nontoxic materials | !not current |
| RIIWHS202D | Enter and work in confined spaces | !not current |
| RIIWHS204D | Work safely at heights | !not current |
| RIIWHS205D | Control traffic with stop-slow bat | !not current |
| RIIWMG203D | Drain and dewater civil construction site | !not current |
| TLIB0002 | Carry out vehicle inspection | ●current |
| TLIC2002 | Drive light rigid vehicle | ●current |
| TLIC2025 | Operate four wheel drive vehicle | !not current |
| TLIC3003 | Drive medium rigid vehicle | ●current |
| TLIC3004 | Drive heavy rigid vehicle | ●current |
| TLIC3005 | Drive heavy combination vehicle | ●current |
| TLID2003 | Handle dangerous goods/hazardous substances | !not current |
| TLID2010 | Operate a forklift | !not current |
| TLID2016 | Load and unload explosives/dangerous goods | !not current |
| TLID3033 | Operate a vehicle-mounted loading crane | !not current |
| TLIF2006 | Apply accident-emergency procedures | ●current |
| TLIF2010 | Apply fatigue management strategies | ●current |
| TLIF2012 | Apply safe procedures when handling/transporting dangerous goods or explosives | ●current |
| TLILIC0012 | Licence to operate a vehicle loading crane (capacity 10 metre tonnes and above) | !not current |
| TLILIC2001 | Licence to operate a forklift truck | !not current |
| TLILIC2014 | Licence to drive a light rigid vehicle | ●current |
| TLILIC2015 | Licence to drive a medium rigid vehicle | ●current |
| TLILIC2016 | Licence to drive a heavy rigid vehicle | ●current |
| TLILIC3017 | Licence to drive a heavy combination vehicle | ●current |
| UEENEEC001B | Maintain documentation | !not current |
| UEENEED101A | Use computer applications relevant to a workplace | !not current |
| UEENEEE101A | Apply Occupational Health and Safety regulations, codes and practices in the workplace | !not current |
| UEENEEE102A | Fabricate, assemble and dismantle utilities industry components | !not current |
| UEENEEE107A | Use drawings, diagrams, schedules, standards, codes and specifications | !not current |
| UEENEEG105A | Verify compliance and functionality of low voltage general electrical installations | !not current |
| UEENEEI112A | Verify compliance and functionality of instrumentation and control installations | !not current |
| UEENEEM080A | Report on the integrity of explosion-protected equipment in a hazardous area | !not current |
| UEGNSG004 | Locate, prove and protect utility assets | !not current |
| UEGNSG006 | Use a portable gas detector to locate escape | !not current |
| UEGNSG134 | Establish a utilities infrastructure work site | !not current |
| UEGNSG136 | Carry out transmission pipeline construction work activities | !not current |
| UEGNSG219 | Conduct excavations in the utilities industry | !not current |
| UEGNSG221 | First on site response to gas pipeline emergencies | !not current |
| UEGNSG224 | Construct and lay copper and stainless steel gas distribution pipelines | !not current |
| UEGNSG226 | Assist with the construction, laying and connection of gas distribution services to mains | !not current |
| UEGNSG227 | Assist with the construction and laying of gas distribution mains | !not current |
| UEGNSG330 | Coat metallic pipelines | !not current |
| UEGNSG331 | Establish right of way access for transmission pipeline construction | !not current |
| UEGNSG332 | Undertake hydro-testing for transmission pipeline construction | !not current |
| UEGNSG333 | Work in proximity of transmission pipeline construction plant and equipment | !not current |
| UEGNSG342 | Maintain pipeline easements | !not current |
| UEGNSG615 | Fill LPG cylinders | !not current |
| UEGNSG616 | Refurbish gas cylinders | !not current |
| UEGNSG705 | Disconnect and reconnect small capacity gas meters | !not current |
| UEGNSG708 | Pressure test residential and small commercial gas installations | !not current |
| UEGNSG711 | Process meter reading information using appropriate technology | !not current |
| UEGNSG712 | Read and record meter readings | !not current |
| UEGNSG714 | Relight Type A gas appliances | !not current |
| UEGNSG804 | Maintain single stage and single run gas flow and pressure control and measuring devices | !not current |
| UEPOPS203B | Operate and monitor communications system | !not current |
| UEPOPS205B | Conduct minor mechanical maintenance | !not current |
| UETTDREL14A | Working safely near live electrical apparatus as a non-electrical worker | !not current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every UEG training product on the register · Search all training products
Is UEG20118 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.