UEG20411 Certificate II in Gas Industry Cylinder Operations

Supersededtraining.gov.au: supersededNonEquivalent

The currency period for UEG20411 ended on 11 March 2014 — 12 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 13 March 2015. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

For an ASQA-registered RTO that does not already hold it, adding UEG20114 to scope is a change-of-scope application to ASQA, with a fee set by law: A$200 application fee + A$1,100 assessment fee per application (up to 5 VET courses and 50 units of competency). RTOs registered by a state regulator, and ASQA delegates, sit under other arrangements. Source: NVR Fees Determination 2026, F2026L00814, from 1 July 2026 · read 5 September 2026.

Product type
Qualification
Training package
UEG11 — Gas Industry Training Package
Currency period ends
11 March 2014
Latest release
Release 2 · 18 March 2013 · 2 releases in all
Supersedes
nothing — no earlier product listed
Superseded by
UEG20114 not equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. UEG20411Superseded — not equivalentCertificate II in Gas Industry Cylinder Operations
  2. not equivalent
  3. UEG20114Superseded — equivalentCertificate II in Gas Supply Industry Operations
  4. equivalent
  5. UEG20118Superseded — equivalentCertificate II in Gas Supply Industry Operations
  6. equivalent
  7. UEG20120Superseded — equivalentCertificate II in Gas Supply Industry Operations
  8. equivalent
  9. UEG20121Superseded — equivalentCertificate II in Gas Supply Industry Operations

The chain does not end here: we draw five steps at most, and training.gov.au points on from UEG20121 to UEG20122, which it flags equivalent to UEG20121. Follow it from that page.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • UEG20411UEG20114not equivalent12 March 2014

    The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for UEG20411 and for its training package UEG11 (release 2.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

  • UEG20411_R2.docxUEG20411 release 2 · product document · published 26 November 2024
  • UEG20411_R2.pdfUEG20411 release 2 · product document · published 18 March 2013

Is UEG20411 on your scope?

This page is the register's record of one product. What it cannot tell you is whether UEG20411 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What UEG20411 is made of

training.gov.au lists 31 units for UEG20411: 5 core and 26 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 5 listed

CodeUnitIn this product
UEENEEE101AApply Occupational Health and Safety regulations, codes and practices in the workplacenot current
UEGNSG102BCarry out work activities in a utilities industry work environmentnot current
UEGNSG104BComply with environmental policies and proceduresnot current
UEGNSG105BEstablish the work sitenot current
UEGNSG604BFill gas cylindersnot current

Elective units 26 listed

CodeUnitIn this product
HLTFA302CProvide first aid in remote situationnot current
HLTFA311AApply first aidnot current
TLIC2025AOperate four wheel drive vehiclenot current
TLILIC0012ALicence to operate a vehicle loading crane (capacity 10 metre tonnes and above)not current
TLILIC2001ALicence to operate a forklift trucknot current
TLILIC2016ALicence to drive heavy rigid vehiclenot current
UEENEEC001BMaintain documentationnot current
UEENEED101AUse computer applications relevant to a workplacenot current
UEENEEE102AFabricate, assemble and dismantle utilities industry componentsnot current
UEENEEE107AUse drawings, diagrams, schedules, standards, codes and specificationsnot current
UEENEEM080AReport on the integrity of explosion-protected equipment in a hazardous areanot current
UEGNSG003ALocate, prove and protect gas distribution assetsnot current
UEGNSG202BConstruct and lay distribution pipelines and servicesnot current
UEGNSG215AConduct excavations in the gas industrynot current
UEGNSG301BCoat gas pipelinesnot current
UEGNSG302BMaintain pipeline easementsnot current
UEGNSG602BLoad, discharging LPG by road tankernot current
UEGNSG603BLoad, unload and exchanging gas cylindersnot current
UEGNSG605BRefurbish gas cylindersnot current
UEGNSG613AAssess the operational capability of gas safety equipment on a delivery vehiclenot current
UEGNSG701BProcess meter reading information using appropriate technologynot current
UEGNSG702BRead and record meter readingsnot current
UEGNSG704AConduct an appliance relightnot current
UEPOPS203BOperate and monitor communications systemnot current
UEPOPS205BConduct minor mechanical maintenancenot current
UETTDREL14AWorking safely near live electrical apparatus as a non-electrical workernot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UEG training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is UEG20411 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.