UEG20311 Certificate II in Gas Industry Transmission Pipeline Construction

Supersededtraining.gov.au: supersededNonEquivalent

The currency period for UEG20311 ended on 11 March 2014 — 12 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 13 March 2015 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
UEG11 — Gas Industry Training Package
Currency period ends
11 March 2014
Latest release
Release 2 · 18 March 2013 · 2 releases in all
Supersedes
nothing — no earlier product listed
Superseded by
UEG20114 not equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. UEG20311Superseded — not equivalentCertificate II in Gas Industry Transmission Pipeline Construction
  2. not equivalent
  3. UEG20114Superseded — equivalentCertificate II in Gas Supply Industry Operations
  4. equivalent
  5. UEG20118Superseded — equivalentCertificate II in Gas Supply Industry Operations
  6. equivalent
  7. UEG20120Superseded — equivalentCertificate II in Gas Supply Industry Operations
  8. equivalent
  9. UEG20121Superseded — equivalentCertificate II in Gas Supply Industry Operations

The chain does not end here: we draw five steps at most, and training.gov.au points on from UEG20121 to UEG20122, which it flags equivalent to UEG20121. Follow it from that page.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • UEG20311UEG20114not equivalent12 March 2014

    The register records this supersession but attaches no note on what changed.

Is UEG20311 on your scope?

This page is the register's record of one product. What it cannot tell you is whether UEG20311 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What UEG20311 is made of

training.gov.au lists 36 units for UEG20311: 6 core and 30 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 6 listed

CodeUnitIn this product
UEENEEE101AApply Occupational Health and Safety regulations, codes and practices in the workplacenot current
UEGNSG102BCarry out work activities in a utilities industry work environmentnot current
UEGNSG104BComply with environmental policies and proceduresnot current
UEGNSG105BEstablish the work sitenot current
UEGNSG125ACarry out transmission pipeline construction work activitiesnot current
UEGNSG128AEstablish a transmission pipeline construction work sitenot current

Elective units 30 listed

CodeUnitIn this product
CPCCLDG3001ALicence to perform doggingnot current
CPCCLRG3001ALicence to perform rigging basic levelnot current
CPCCOHS1001AWork safely in the construction industrynot current
HLTFA302CProvide first aid in remote situationnot current
HLTFA311AApply first aidnot current
RIIMPO308BConduct tracked dozer operationsnot current
RIIMPO318BConduct civil construction skid steer loader operationsnot current
TLIC2025AOperate four wheel drive vehiclenot current
TLILIC0012ALicence to operate a vehicle loading crane (capacity 10 metre tonnes and above)not current
TLILIC2001ALicence to operate a forklift trucknot current
TLILIC2016ALicence to drive heavy rigid vehiclenot current
UEENEEC001BMaintain documentationnot current
UEENEED101AUse computer applications relevant to a workplacenot current
UEENEEE102AFabricate, assemble and dismantle utilities industry componentsnot current
UEENEEE107AUse drawings, diagrams, schedules, standards, codes and specificationsnot current
UEENEEM080AReport on the integrity of explosion-protected equipment in a hazardous areanot current
UEGNSG003ALocate, prove and protect gas distribution assetsnot current
UEGNSG215AConduct excavations in the gas industrynot current
UEGNSG301BCoat gas pipelinesnot current
UEGNSG302BMaintain pipeline easementsnot current
UEGNSG320AEstablish right of way access for transmission pipeline constructionnot current
UEGNSG321AUndertake hydrotesting for transmission pipeline constructionnot current
UEGNSG322AUndertake rigging operations for transmission pipeline constructionnot current
UEGNSG323AOperate transmission pipeline construction plant and equipmentnot current
UEGNSG701BProcess meter reading information using appropriate technologynot current
UEGNSG702BRead and record meter readingsnot current
UEGNSG704AConduct an appliance relightnot current
UEPOPS203BOperate and monitor communications systemnot current
UEPOPS205BConduct minor mechanical maintenancenot current
UETTDREL14AWorking safely near live electrical apparatus as a non-electrical workernot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UEG training product on the register · Search all training products

Is UEG20311 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.