When must new enrolments into PMC20110 stop?

New enrolments are not permitted from 22 June 2017 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in PMC20110?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

PMC20110 Certificate II in Manufactured Mineral Products

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

PMC20110Superseded — equivalentCertificate II in Manufactured Mineral Products
equivalent
PMC20116Deleted from the registerCertificate II in Manufactured Mineral Products

The register does not list a current endpoint for this chain: PMC20116 is the last product it points at, and PMC20116 is not marked current either.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

PMC20104PMC20110equivalent29 April 2010
The register records this supersession but attaches no note on what changed.
PMC20110PMC20116equivalent21 June 2016
The register records this supersession but attaches no note on what changed.

Is PMC20110 on your scope?

This page is the register's record of one product. What it cannot tell you is whether PMC20110 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What PMC20110 is made of

training.gov.au lists 93 units for PMC20110. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 93 listed

Code	Unit	Core or elective	In this product
MSAENV272B	Participate in environmentally sustainable work practices	`N/A`	not current
MSAPMOHS110A	Follow emergency response procedures	`N/A`	not current
MSAPMOHS200A	Work safely	`N/A`	not current
MSAPMOPS100A	Use equipment	`N/A`	not current
MSAPMOPS101A	Make measurements	`N/A`	not current
MSAPMOPS200A	Operate equipment	`N/A`	not current
MSAPMOPS212A	Use organisation computers or data systems	`N/A`	not current
MSAPMPER200C	Work in accordance with an issued permit	`N/A`	not current
MSAPMPER201A	Monitor and control work permits	`N/A`	not current
MSAPMPER202A	Observe permit work	`N/A`	not current
MSAPMPER205C	Enter confined space	`N/A`	not current
MSAPMSUP100A	Apply workplace procedures	`N/A`	not current
MSAPMSUP101A	Clean workplace or equipment	`N/A`	not current
MSAPMSUP102A	Communicate in the workplace	`N/A`	not current
MSAPMSUP106A	Work in a team	`N/A`	not current
MSAPMSUP200A	Achieve work outcomes	`N/A`	not current
MSAPMSUP201A	Receive or despatch goods	`N/A`	current
MSAPMSUP210A	Process and record information	`N/A`	not current
MSAPMSUP230A	Monitor process operations	`N/A`	not current
MSAPMSUP240A	Undertake minor maintenance	`N/A`	not current
MSAPMSUP280A	Manage conflict at work	`N/A`	not current
MSAPMSUP292A	Sample and test materials and product	`N/A`	not current
MSL952001A	Collect routine site samples	`N/A`	not current
MSS402030A	Apply cost factors to work practices	`N/A`	not current
MSS402031A	Interpret product costs in terms of customer requirements	`N/A`	not current
MSS402040A	Apply 5S procedures	`N/A`	not current
MSS402050A	Monitor process capability	`N/A`	not current
MSS402051A	Apply quality standards	`N/A`	not current
MSS402060A	Use planning software systems in operations	`N/A`	not current
MSS402080A	Undertake root cause analysis	`N/A`	not current

Show the remaining 63 units

Code	Unit	Core or elective	In this product
MSS402081A	Contribute to the application of a proactive maintenance strategy	`N/A`	not current
PMAOPS101C	Read dials and indicators	`N/A`	not current
PMAOPS105C	Select and prepare materials	`N/A`	not current
PMAOPS216B	Operate local control system	`N/A`	not current
PMBHAN103C	Shift materials safely by hand	`N/A`	not current
PMC552002C	Operate equipment to blend/mix materials	`N/A`	not current
PMC552003C	Operate grinding equipment	`N/A`	not current
PMC552004C	Prepare for production	`N/A`	not current
PMC552005C	Process greenware/green products	`N/A`	not current
PMC552006C	Operate an autoclave	`N/A`	not current
PMC552007B	Heat accelerate the curing of precast concrete	`N/A`	not current
PMC552008B	Operate crushing equipment	`N/A`	not current
PMC552010C	Operate a calcining kiln	`N/A`	not current
PMC552020C	Operate slip casting equipment	`N/A`	not current
PMC552021C	Operate manual glazing equipment	`N/A`	not current
PMC552022C	Prepare materials for clay and ceramic production	`N/A`	not current
PMC552023C	Finish products after firing	`N/A`	not current
PMC552024C	Hand mould products	`N/A`	not current
PMC552030C	Operate a firing kiln	`N/A`	not current
PMC552031C	Operate extrusion equipment	`N/A`	not current
PMC552032C	Operate pressing equipment	`N/A`	not current
PMC552040C	Operate glass melting process	`N/A`	not current
PMC552041C	Operate process ovens	`N/A`	not current
PMC552042C	Operate blown insulation equipment	`N/A`	not current
PMC552043C	Operate float forming equipment	`N/A`	not current
PMC552044C	Operate fibre forming equipment	`N/A`	not current
PMC552045C	Operate container forming equipment	`N/A`	not current
PMC552046C	Operate glass printing equipment	`N/A`	not current
PMC552047C	Operate primary annealing equipment	`N/A`	not current
PMC552048C	Operate glass finishing equipment	`N/A`	not current
PMC552049C	Operate on-line stacking and assembly equipment	`N/A`	not current
PMC552050C	Schedule, cut and bend reinforcement	`N/A`	not current
PMC552051C	Finish green concrete products	`N/A`	not current
PMC552052C	Cast moulded concrete products	`N/A`	not current
PMC552053C	Finish cured concrete products	`N/A`	not current
PMC552054C	Spin concrete pipes	`N/A`	not current
PMC552055C	Conduct benching operations	`N/A`	not current
PMC552056B	Assemble, fabricate and place reinforcement	`N/A`	not current
PMC552057B	Finish casting operation	`N/A`	not current
PMC552058B	Demould concrete products	`N/A`	not current
PMC552060C	Batch mix concrete	`N/A`	not current
PMC552061C	Deliver concrete to site	`N/A`	not current
PMC552065B	Prepare asphalt	`N/A`	not current
PMC552070B	Operate forming equipment	`N/A`	not current
PMC552071B	Operate wet and dry end equipment	`N/A`	not current
PMC552072B	Produce fibrous plasterboard	`N/A`	not current
PMC552090B	Use and maintain tools and equipment for refractory operations	`N/A`	not current
PMC552091B	Prepare for, install and repair refractory brickwork/blockwork	`N/A`	not current
PMC552092B	Prepare for and install mouldable refractory materials	`N/A`	not current
PMC552093B	Prepare for and cast refractory materials	`N/A`	not current
PMC552094B	Prepare for and apply shotcrete for installation	`N/A`	not current
PMC552095B	Prepare for, install and repair ceramic fibre	`N/A`	not current
PMC561072C	Store materials for production	`N/A`	not current
PMC561080B	Organise self	`N/A`	not current
PMC562070B	Move materials	`N/A`	not current
PMC562071C	Operate bulk materials handling equipment	`N/A`	not current
PMC562075B	Maintain kiln refractory	`N/A`	not current
PMC562081B	Deliver customer service	`N/A`	not current
PMC562083C	Allocate and complete team tasks	`N/A`	not current
RIIRIS201B	Conduct local risk control	`N/A`	not current
TLIC3003A	Drive medium rigid vehicle	`N/A`	not current
TLIC3004A	Drive heavy rigid vehicle	`N/A`	not current
TLID2010A	Operate a forklift	`N/A`	not current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every PMC training product on the register · Search all training products

Is PMC20110 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.