Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is PMB20116 on your scope?
This page is the register's record of one product. What it cannot tell you is whether PMB20116 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What PMB20116 is made of
training.gov.au lists 118 units for PMB20116: 3 core and 115 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 3 listed
Elective units 115 listed
| Code | Unit | In this product |
|---|---|---|
| FWPCOT2238 | Cut materials with a hand-held chainsaw | !not current |
| HLTAID003 | Provide first aid | !not current |
| LMTGN2008B | Coordinate work of team or section | !not current |
| MEM13003B | Work safely with industrial chemicals and materials | !not current |
| MEM16006A | Organise and communicate information | !not current |
| MEM16007A | Work with others in a manufacturing, engineering or related environment | !not current |
| MEM16008A | Interact with computing technology | !not current |
| MEM18001C | Use hand tools | !not current |
| MEM18002B | Use power tools/hand held operations | !not current |
| MSMENV172 | Identify and minimise environmental hazards | ●current |
| MSMOPS100 | Use equipment | ●current |
| MSMOPS101 | Make measurements | ●current |
| MSMOPS102 | Perform tasks to support production | ●current |
| MSMOPS200 | Operate equipment | ●current |
| MSMOPS212 | Use organisation computers or data systems | ●current |
| MSMOPS244 | Lay out and cut materials | ●current |
| MSMPER200 | Work in accordance with an issued permit | ●current |
| MSMPER201 | Monitor and control work permits | ●current |
| MSMPER205 | Enter confined space | ●current |
| MSMSUP100 | Apply workplace context to own job | ●current |
| MSMSUP101 | Clean workplace or equipment | ●current |
| MSMSUP102 | Communicate in the workplace | ●current |
| MSMSUP106 | Work in a team | ●current |
| MSMSUP200 | Achieve work outcomes | ●current |
| MSMSUP204 | Pack products or materials | ●current |
| MSMSUP205 | Transfer loads | ●current |
| MSMSUP230 | Monitor process operations | ●current |
| MSMSUP240 | Undertake minor maintenance | ●current |
| MSMSUP273 | Handle goods | ●current |
| MSMSUP280 | Manage conflict at work | ●current |
Show the remaining 85 elective units
| Code | Unit | In this product |
|---|---|---|
| MSMSUP291 | Participate in continuous improvement | ●current |
| MSMSUP292 | Sample and test materials and product | ●current |
| MSMWHS100 | Follow WHS procedures | ●current |
| MSMWHS110 | Follow emergency response procedures | ●current |
| MSMWHS205 | Control minor incidents | ●current |
| MSMWHS210 | Undertake first response to non-fire incidents | ●current |
| MSMWHS212 | Undertake first response to fire incidents | ●current |
| MSMWHS216 | Operate breathing apparatus | ●current |
| MSMWHS217 | Gas test atmospheres | ●current |
| MSS402002 | Sustain process improvements | !not current |
| MSS402020 | Apply quick changeover procedures | !not current |
| MSS402021 | Apply Just in Time procedures | !not current |
| MSS402030 | Apply cost factors to work practices | !not current |
| MSS402040 | Apply 5S procedures | !not current |
| MSS402050 | Monitor process capability | !not current |
| MSS402051 | Apply quality standards | !not current |
| MSS402060 | Use planning software systems in operations | !not current |
| MSS402080 | Undertake root cause analysis | !not current |
| PMBFIN201 | Finish products and components | !not current |
| PMBFIN202 | Fit attachments to products | !not current |
| PMBFIN203 | Repair product imperfections | !not current |
| PMBFIN205 | Hand decorate products | !not current |
| PMBHAN103 | Shift materials safely by hand | !not current |
| PMBHAN208 | Store products | !not current |
| PMBPREP201 | Prepare moulds for composites production | !not current |
| PMBPREP205 | Assemble materials and equipment for production | !not current |
| PMBPREP206 | Prepare materials to formulae | !not current |
| PMBPROD206 | Operate ancillary equipment | !not current |
| PMBPROD207 | Operate calender | !not current |
| PMBPROD209 | Operate cable winding equipment | !not current |
| PMBPROD210 | Operate injection moulding equipment | !not current |
| PMBPROD211 | Operate blow moulding equipment | !not current |
| PMBPROD212 | Operate thermoforming equipment | !not current |
| PMBPROD213 | Operate extruders | !not current |
| PMBPROD216 | Operate blown film equipment | !not current |
| PMBPROD217 | Operate printing equipment | !not current |
| PMBPROD221 | Operate rotational moulding equipment | !not current |
| PMBPROD229 | Operate polystyrene shape moulding equipment | !not current |
| PMBPROD233 | Operate film conversion equipment | !not current |
| PMBPROD235 | Use materials and process knowledge to complete work operations | !not current |
| PMBPROD236 | Operate hand held air/power equipment for production processes | !not current |
| PMBPROD237 | Splice cables | !not current |
| PMBPROD238 | Perform creel rack operations | !not current |
| PMBPROD239 | Build reinforced conveyor belts | !not current |
| PMBPROD240 | Cut materials | !not current |
| PMBPROD241 | Lay up rubber lining or lag pulleys | !not current |
| PMBPROD242 | Bond polymers to surfaces | !not current |
| PMBPROD245 | Fabricate materials | !not current |
| PMBPROD246 | Hand mix materials | !not current |
| PMBPROD247 | Hand lay up composites | !not current |
| PMBPROD248 | Prepare surfaces for coating | !not current |
| PMBPROD249 | Apply liquid surface coatings | !not current |
| PMBPROD251 | Apply gel coat or other polymer surface finish | !not current |
| PMBPROD252 | Operate compounding equipment | !not current |
| PMBPROD253 | Operate an internal mill blender | !not current |
| PMBPROD254 | Operate an open mill blender | !not current |
| PMBPROD255 | Operate mixing equipment | !not current |
| PMBPROD259 | Operate granulating equipment | !not current |
| PMBPROD261 | Operate continuous vulcanising equipment | !not current |
| PMBPROD262 | Operate tyre curing equipment | !not current |
| PMBPROD263 | Operate retread curing equipment | !not current |
| PMBPROD265 | Operate portable vulcanising equipment | !not current |
| PMBPROD266 | Prepare tyre casings for retreading | !not current |
| PMBPROD267 | Operate steel cutting equipment | !not current |
| PMBPROD268 | Operate bead coiling equipment | !not current |
| PMBPROD270 | Operate injection blow moulding equipment | !not current |
| PMBPROD280 | Operate resin-glass depositor equipment | !not current |
| PMBPROD281 | Finish composite products | !not current |
| PMBPROD282 | Assemble mould | !not current |
| PMBPROD283 | Demould product | !not current |
| PMBPROD284 | Operate open flame moulding equipment | !not current |
| PMBPROD285 | Operate computer controlled equipment | !not current |
| PMBPROD287 | Weld plastics materials | !not current |
| PMBPROD290 | Operate filament winding equipment | !not current |
| PMBPROD291 | Operate resin infusion moulding equipment | !not current |
| PMBPROD292 | Operate pultrusion equipment | !not current |
| PMBPROD293 | Operate vacuum bagging equipment | !not current |
| PMBPROD294 | Operate resin transfer moulding equipment | !not current |
| PMBPROD295 | Operate composite sheeting equipment | !not current |
| PMBPROD296 | Operate centrifugal casting equipment | !not current |
| PMBPROD297 | Operate equipment using moulding compounds | !not current |
| PMBPROD298 | Operate equipment using pre-preg material | !not current |
| PMBWASTE101 | Collect waste for recycling or safe disposal | !not current |
| RIIRIS201D | Conduct local risk control | !not current |
| TLID2010 | Operate a forklift | !not current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every PMB training product on the register · Search all training products
Is PMB20116 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.