Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is PMB50116 on your scope?
This page is the register's record of one product. What it cannot tell you is whether PMB50116 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What PMB50116 is made of
training.gov.au lists 51 units for PMB50116: 4 core and 47 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 4 listed
Elective units 47 listed
| Code | Unit | In this product |
|---|---|---|
| MEM09003B | Prepare basic engineering drawing | !not current |
| MEM15001B | Perform basic statistical quality control | !not current |
| MEM16006A | Organise and communicate information | !not current |
| MEM16007A | Work with others in a manufacturing, engineering or related environment | !not current |
| MEM16008A | Interact with computing technology | !not current |
| MEM30031A | Operate computer-aided design (CAD) system to produce basic drawing elements | !not current |
| MEM30033A | Use computer-aided design (CAD) to create and display 3-D models | !not current |
| MSL974003 | Perform chemical tests and procedures | !not current |
| MSL974005 | Perform physical tests | !not current |
| MSL974010 | Perform mechanical tests | !not current |
| MSMOPS400 | Optimise process/plant area | ●current |
| MSMOPS401 | Trial new process or product | ●current |
| MSMSUP383 | Facilitate a team | ●current |
| MSMSUP400 | Develop and monitor quality systems | ●current |
| MSMSUP404 | Coordinate maintenance | ●current |
| MSMSUP405 | Identify problems in fluid power system | ●current |
| MSMSUP406 | Identify faults in electronic control | ●current |
| MSMWHS400 | Contribute to WHS management system | ●current |
| MSMWHS401 | Assess risk | ●current |
| MSS015002 | Develop strategies for more sustainable use of resources | !not current |
| MSS403002 | Ensure process improvements are sustained | !not current |
| MSS404052 | Apply statistics to operational processes | !not current |
| MSS405020 | Develop quick changeover procedures | !not current |
| MSS405021 | Develop a Just in Time system | !not current |
| MSS405030 | Optimise cost of a product or service | !not current |
| MSS405031 | Undertake value analysis of product or process costs in terms of customer requirements | !not current |
| MSS405050 | Determine and improve process capability | !not current |
| MSS405070 | Develop sustainable energy practices | !not current |
| PMBPROD430 | Trial a new die/tool | !not current |
| PMBPROD431 | Trial a new, advanced or complex mould | !not current |
Show the remaining 17 elective units
| Code | Unit | In this product |
|---|---|---|
| PMBTECH401 | Predict polymer properties and characteristics | !not current |
| PMBTECH402 | Set advanced or complex dies | !not current |
| PMBTECH403 | Test fibre-composites materials and laminates | !not current |
| PMBTECH404 | Mould chemical resistant and/or fire retardant fibre-composites | !not current |
| PMBTECH405 | Repair damaged fibre-composites structures | !not current |
| PMBTECH406 | Diagnose production equipment problems | !not current |
| PMBTECH501 | Analyse equipment performance | !not current |
| PMBTECH502 | Review and analyse production trials and specify retrials | !not current |
| PMBTECH503 | Determine rheology and output of plastics materials from processing equipment | !not current |
| PMBTECH504 | Determine heat transfer loads for processing equipment | !not current |
| PMBTECH505 | Choose polymer materials for an application | !not current |
| PMBTECH506 | Analyse the design of products and tools | !not current |
| PMBTECH507 | Develop fibre-composite products using cored-laminate techniques | !not current |
| PMBTECH508 | Develop a new compound | !not current |
| PMBTECH509 | Modify an existing product | !not current |
| PMBTECH510 | Analyse failure in polymeric materials | !not current |
| PSPPM502B | Manage complex projects | !not current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every PMB training product on the register · Search all training products
Is PMB50116 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.