Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
AUR32116AUR32120=equivalent12 November 2020
The register records this supersession but attaches no note on what changed.
AUR32120AUR32126=equivalent8 July 2026
Core unit AURVTN120 Remove and replace major welded panels on vehicles, updated to AURVTN220 Remove and replace major welded panels on vehicles. Superseded specialisation and elective units updated and a new unit added.
Is AUR32120 on your scope?
This page is the register's record of one product. What it cannot tell you is whether AUR32120 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What AUR32120 is made of
training.gov.au lists 70 units for AUR32120: 17 core and 53 elective. To complete it, the register publishes a rule of 17 core units plus 14 electives — 31 units in all.
Core units 17 listed
| Code | Unit | In this product |
|---|---|---|
| AURAEA002 | Follow environmental and sustainability best practice in an automotive workplace | ●current |
| AURAFA108 | Interpret and apply automotive repair instructions | ●current |
| AURASA102 | Follow safe working practices in an automotive workplace | ●current |
| AURETR042 | Remove, refit and operate electrical components following body repair activities | ●current |
| AURETR125 | Test, charge and replace batteries and jump-start vehicles | ●current |
| AURTTK102 | Use and maintain tools and equipment in an automotive workplace | ●current |
| AURTTY001 | Repair vehicle chassis, frame and associated components | ●current |
| AURVTN003 | Remove and store vehicle body components | ●current |
| AURVTN022 | Repair vehicle body misalignment | ●current |
| AURVTN104 | Remove, replace and align bolt-on vehicle body panels and components | ●current |
| AURVTN116 | Repair vehicle body panels using filler | ●current |
| AURVTN120 | Remove and replace major welded panels on vehicles | !not current |
| AURVTN123 | Repair adhesive bonded structural damage on vehicles | ●current |
| AURVTN132 | Inspect vehicle damage and determine repair procedures | ●current |
| AURVTN135 | Apply original equipment manufacturer repair procedures during vehicle repairs | ●current |
| AURVTW103 | Carry out advanced gas metal arc welding on vehicle body sections | ●current |
| AURVTW105 | Carry out spot welding | ●current |
Elective units 53 listed
| Code | Unit | In this product |
|---|---|---|
| AUMABA012 | Operate load shifting equipment | ●current |
| AUMGTY002 | Install vehicle components | ●current |
| AURAFA002 | Read and respond to automotive workplace information | ●current |
| AURAFA104 | Resolve routine problems in an automotive workplace | ●current |
| AURAMA001 | Work effectively with others in an automotive workplace | ●current |
| AURETH011 | Depower and reinitialise hybrid electric vehicles | ●current |
| AURETH017 | Work safely with hydrogen in the automotive industry | ●current |
| AURETH101 | Depower and reinitialise battery electric vehicles | ●current |
| AURETR149 | Apply knowledge of ADAS technology in vehicle pre-repair scans | !not current |
| AURTTA020 | Apply heat induction processes | ●current |
| AURTTW001 | Carry out soft soldering techniques | ●current |
| AURVTA001 | Prepare vehicles for customer use | ●current |
| AURVTA002 | Remove and replace vehicle supplementary restraint systems | ●current |
| AURVTN005 | Remove and replace adhesive attached components on vehicles | ●current |
| AURVTN006 | Remove and replace mechanical units during vehicle repair | ●current |
| AURVTN017 | Repair vehicle thermoplastic body panels and components | ●current |
| AURVTN018 | Repair and replace vehicle structural damage | ●current |
| AURVTN021 | Repair vehicle body components using lead wiping | ●current |
| AURVTN025 | Repair corroded vehicle body panels and components | ●current |
| AURVTN029 | Set up and operate universal vehicle measuring systems | ●current |
| AURVTN030 | Service air compressors and air lines | ●current |
| AURVTN031 | Carry out vehicle sectional repairs | ●current |
| AURVTN102 | Carry out non-structural vehicle panel repairs | ●current |
| AURVTN112 | Install vehicle sunroofs | !not current |
| AURVTN113 | Carry out paint-less dent repairs on vehicle body panels | ●current |
| AURVTN115 | Repair vehicle body panels using metal finishing | ●current |
| AURVTN119 | Repair vehicle structural damage by riveting | ●current |
| AURVTN126 | Repair vehicle aluminium body panels without the use of body filler | ●current |
| AURVTN127 | Repair vehicle aluminium body panels using filler | ●current |
| AURVTN128 | Identify and repair high strength steel vehicle components | ●current |
Show the remaining 23 elective units
| Code | Unit | In this product |
|---|---|---|
| AURVTN133 | Service and repair air compressors and components | ●current |
| AURVTN143 | Identify and repair high strength aluminium components | ●current |
| AURVTP005 | Apply rust prevention and sound deadening materials to vehicle body components | ●current |
| AURVTP113 | Prepare vehicle substrates for refinishing | ●current |
| AURVTS001 | Fabricate wooden components for vehicles | ●current |
| AURVTS006 | Fabricate automotive and marine trim components | ●current |
| AURVTS103 | Fabricate vehicle composite material components | ●current |
| AURVTS104 | Repair vehicle composite material components | ●current |
| AURVTS105 | Fabricate vehicle body panels and components | ●current |
| AURVTT009 | Remove and replace vehicle and vessel seats and fittings | ●current |
| AURVTT121 | Select and apply adhesives in automotive and marine service and repair work | ●current |
| AURVTV001 | Remove, replace and test non-electrical vehicle components and accessories | ●current |
| AURVTW007 | Carry out oxyacetylene thermal heating and cutting on vehicle body sections | ●current |
| AURVTW104 | Carry out tungsten inert gas welding | ●current |
| BSBWHS332X | Apply infection prevention and control procedures to own work activities | ●current |
| MEM05004 | Perform routine oxy fuel gas welding | ●current |
| MEM11011 | Undertake manual handling | ●current |
| MEM13015 | Work safely and effectively in manufacturing and engineering | ●current |
| MEM16006 | Organise and communicate information | ●current |
| MEM18001 | Use hand tools | ●current |
| MEM24001B | Perform basic penetrant testing | !not current |
| RIIWHS204D | Work safely at heights | !not current |
| TAEDEL301 | Provide work skill instruction | !not current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every AUR training product on the register · Search all training products
Is AUR32120 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.