AUR32116 Certificate III in Automotive Body Repair Technology

Supersededtraining.gov.au: supersededEquivalent

The currency period for AUR32116 ended on 11 November 2020 — 5 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockOpen for new enrolmentsClosing to new enrolments soonClosed to new enrolments

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 13 November 2021. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

A second obligation follows from the same fact: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. For an RTO registered by ASQA, new enrolments in this product are not permitted today, so a course page advertising it is not permitted either — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
AUR — Automotive Retail, Service and Repair Training Package
Currency period ends
11 November 2020
Latest release
Release 1 · 14 April 2016
Supersedes
AUR32112
Superseded by
AUR32120 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. AUR32116Superseded — equivalentCertificate III in Automotive Body Repair Technology
  2. equivalent
  3. AUR32120Superseded — equivalentCertificate III in Automotive Body Repair Technology
  4. equivalent
  5. AUR32126CurrentCertificate III in Automotive Body Repair Technology

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • AUR32112AUR32116equivalent13 April 2016

    The register records this supersession but attaches no note on what changed.

  • AUR32116AUR32120equivalent12 November 2020

    The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for AUR32116 and for its training package AUR (release 9.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

Is AUR32116 on your scope?

This page is the register's record of one product. What it cannot tell you is whether AUR32116 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What AUR32116 is made of

training.gov.au lists 64 units for AUR32116: 16 core and 48 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 16 listed

CodeUnitIn this product
AURAEA002Follow environmental and sustainability best practice in an automotive workplacecurrent
AURAFA008Interpret and apply automotive repair instructionsnot current
AURASA002Follow safe working practices in an automotive workplacenot current
AURETR025Test, charge and replace batteries and jump-start vehiclesnot current
AURTTK002Use and maintain tools and equipment in an automotive workplacenot current
AURTTY001Repair vehicle chassis, frame and associated componentscurrent
AURVTN003Remove and store vehicle body componentscurrent
AURVTN004Remove, replace and align bolt-on vehicle body panels and componentsnot current
AURVTN016Repair vehicle body panels using fillernot current
AURVTN020Remove and replace major welded panels on vehiclesnot current
AURVTN022Repair vehicle body misalignmentcurrent
AURVTN023Repair adhesive bonded structural damage on vehiclesnot current
AURVTN032Inspect vehicle damage and determine repair proceduresnot current
AURVTN035Apply original equipment manufacturer repair procedures during vehicle repairsnot current
AURVTW003Carry out advanced gas metal arc welding on vehicle body sectionsnot current
AURVTW007Carry out oxyacetylene thermal heating and cutting on vehicle body sectionscurrent

Elective units 48 listed

CodeUnitIn this product
AUMABA002Operate load shifting equipmentnot current
AUMGTY002Install vehicle componentscurrent
AURAFA002Read and respond to automotive workplace informationcurrent
AURAFA004Resolve routine problems in an automotive workplacenot current
AURAMA001Work effectively with others in an automotive workplacecurrent
AURETH001Depower and reinitialise battery electric vehiclesnot current
AURETH011Depower and reinitialise hybrid electric vehiclescurrent
AURETR042Remove, refit and operate electrical components following body repair activitiescurrent
AURTTA020Apply heat induction processescurrent
AURVTA001Prepare vehicles for customer usecurrent
AURVTA002Remove and replace vehicle supplementary restraint systemscurrent
AURVTN002Carry out non-structural vehicle panel repairsnot current
AURVTN005Remove and replace adhesive attached components on vehiclescurrent
AURVTN006Remove and replace mechanical units during vehicle repaircurrent
AURVTN012Install vehicle sunroofsnot current
AURVTN013Carry out paint-less dent repairs on vehicle body panelsnot current
AURVTN015Repair vehicle body panels using metal finishingnot current
AURVTN017Repair vehicle thermoplastic body panels and componentscurrent
AURVTN018Repair and replace vehicle structural damagecurrent
AURVTN019Repair vehicle structural damage by rivetingnot current
AURVTN021Repair vehicle body components using lead wipingcurrent
AURVTN025Repair corroded vehicle body panels and componentscurrent
AURVTN026Repair vehicle aluminium body panels without the use of body fillernot current
AURVTN027Repair vehicle aluminium body panels using fillernot current
AURVTN028Identify and repair high strength steel vehicle componentsnot current
AURVTN029Set up and operate universal vehicle measuring systemscurrent
AURVTN030Service air compressors and air linescurrent
AURVTN031Carry out vehicle sectional repairscurrent
AURVTN033Service and repair air compressors and componentsnot current
AURVTP005Apply rust prevention and sound deadening materials to vehicle body componentscurrent
Show the remaining 18 elective units
CodeUnitIn this product
AURVTP019Prepare and paint plastic and composite vehicle surfacescurrent
AURVTS001Fabricate wooden components for vehiclescurrent
AURVTS002Repair wooden components in vehiclesnot current
AURVTS003Fabricate vehicle composite material componentsnot current
AURVTS004Repair vehicle composite material componentsnot current
AURVTS005Fabricate vehicle body panels and componentsnot current
AURVTS006Fabricate automotive and marine trim componentscurrent
AURVTT009Remove and replace vehicle and vessel seats and fittingscurrent
AURVTT021Select and apply adhesives in automotive and marine service and repair worknot current
AURVTV001Remove, replace and test non-electrical vehicle components and accessoriescurrent
AURVTW001Carry out manual metal arc welding on componentsnot current
AURVTW004Carry out tungsten inert gas weldingnot current
AURVTW005Carry out spot weldingnot current
MEM05004CPerform routine oxy acetylene weldingnot current
MEM18001CUse hand toolsnot current
MEM24001BPerform basic penetrant testingnot current
RIIWHS204DWork safely at heightsnot current
TAEDEL301Provide work skill instructionnot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every AUR training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is AUR32116 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.