CPCCLSF2001A Licence to erect, alter and dismantle scaffolding basic level

Supersededtraining.gov.au: supersededEquivalent

The currency period for CPCCLSF2001A ended on 25 November 2020 — 5 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 27 November 2021 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Unit of competency
Training package
CPC08 — Construction, Plumbing and Services Training Package
Currency period ends
25 November 2020
Latest release
Release 1 · 19 May 2011
Supersedes
nothing — no earlier product listed
Superseded by
CPCCLSF2001 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. CPCCLSF2001ASuperseded — equivalentLicence to erect, alter and dismantle scaffolding basic level
  2. equivalent
  3. CPCCLSF2001CurrentLicence to erect, alter and dismantle scaffolding basic level

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • CPCCLSF2001ACPCCLSF2001equivalent26 November 2020

    The register records this supersession but attaches no note on what changed.

Is CPCCLSF2001A on your scope?

This page is the register's record of one product. What it cannot tell you is whether CPCCLSF2001A sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

Where CPCCLSF2001A is used

training.gov.au lists CPCCLSF2001A inside 63 training products, 12 of them current. Every one of them is below, with the register's own core or elective flag for CPCCLSF2001A in that product.

Current products 12 listed

CodeTraining productTypeCPCCLSF2001A is
CPC30216Certificate III in Signs and GraphicsQualificationelective
MEM20219Certificate II in Engineering - Production TechnologyQualificationelective
MEM30119Certificate III in Engineering - Production SystemsQualificationelective
RII20120Certificate II in Resources and Infrastructure Work PreparationQualificationelective
RII20220Certificate II in Surface Extraction OperationsQualificationelective
RII20520Certificate II in Resource ProcessingQualificationelective
RII20720Certificate II in Civil ConstructionQualificationelective
RII30120Certificate III in Surface Extraction OperationsQualificationelective
RII30820Certificate III in Civil Construction Plant OperationsQualificationelective
RII30920Certificate III in Civil ConstructionQualificationelective
RII31220Certificate III in Civil FoundationsQualificationelective
RII31619Certificate III in Trenchless TechnologyQualificationelective

Products no longer current 51 listed

The register still records CPCCLSF2001A inside these, but it no longer recommends them as current. They are here because a scope history or an old enrolment can still point at them.

CodeTraining productTypeCPCCLSF2001A is
CPC30413Certificate III in DemolitionQualificationelective
CPC30911Certificate III in ScaffoldingQualificationelective
CUA30413Certificate III in Live Production and ServicesQualificationelective
CUA30415Certificate III in Live Production and ServicesQualificationelective
CUA40413Certificate IV in Live Production and Technical ServicesQualificationelective
CUA40415Certificate IV in Live Production and Technical ServicesQualificationelective
MEM20205Certificate II in Engineering - Production TechnologyQualificationelective
MEM30105Certificate III in Engineering - Production SystemsQualificationelective
RII20109Certificate II in Resources and Infrastructure Work PreparationQualificationelective
RII20113Certificate II in Resources and Infrastructure Work PreparationQualificationelective
Show the remaining 41 products no longer current
CodeTraining productTypeCPCCLSF2001A is
RII20115Certificate II in Resources and Infrastructure Work PreparationQualificationelective
RII20213Certificate II in Surface Extraction OperationsQualificationelective
RII20215Certificate II in Surface Extraction OperationsQualificationelective
RII20313Certificate II in Underground Coal MiningQualificationelective
RII20315Certificate II in Underground Coal MiningQualificationelective
RII20513Certificate II in Resource ProcessingQualificationelective
RII20515Certificate II in Resource ProcessingQualificationelective
RII20709Certificate II in Civil ConstructionQualificationelective
RII20712Certificate II in Civil ConstructionQualificationelective
RII20713Certificate II in Civil ConstructionQualificationelective
RII20715Certificate II in Civil ConstructionQualificationelective
RII30115Certificate III in Surface Extraction OperationsQualificationelective
RII30813Certificate III in Civil Construction Plant OperationsQualificationelective
RII30815Certificate III in Civil Construction Plant OperationsQualificationelective
RII30909Certificate III in Civil ConstructionQualificationelective
RII30912Certificate III in Civil ConstructionQualificationelective
RII30913Certificate III in Civil ConstructionQualificationelective
RII30915Certificate III in Civil ConstructionQualificationelective
RII30919Certificate III in Civil ConstructionQualificationelective
RII31213Certificate III in Civil FoundationsQualificationelective
RII31215Certificate III in Civil FoundationsQualificationelective
RII31613Certificate III in Trenchless TechnologyQualificationelective
RII31615Certificate III in Trenchless TechnologyQualificationelective
UEP20112Certificate II in ESI Generation - Operations SupportQualificationelective
UEP20118Certificate II in ESI Generation - Operations SupportQualificationelective
UEP30112Certificate III in ESI Generation - Systems OperationsQualificationelective
UEP30118Certificate III in ESI Generation - Systems OperationsQualificationelective
UEP30212Certificate III in ESI Generation - OperationsQualificationelective
UEP30218Certificate III in ESI Generation - OperationsQualificationelective
UEP40312Certificate IV in ESI Generation Maintenance (Mechanical)Qualificationelective
UEP40412Certificate IV in ESI Generation Maintenance (Fabrication)Qualificationelective
UEP40418Certificate IV in ESI Generation Maintenance (Fabrication)Qualificationelective
UEP40518Certificate IV in ESI Generation Maintenance (Mechanical)Qualificationelective
UET30512Certificate III in ESI - Power Systems - Transmission OverheadQualificationelective
UET30519Certificate III in ESI - Power Systems - Transmission OverheadQualificationelective
UET30612Certificate III in ESI - Power Systems - Distribution OverheadQualificationelective
UET30619Certificate III in ESI - Power Systems - Distribution OverheadQualificationelective
UET30712Certificate III in ESI - Power Systems - Rail TractionQualificationelective
UET30719Certificate III in ESI - Power Systems - Rail TractionQualificationelective
UET30812Certificate III in ESI - Power Systems - Distribution Cable JointingQualificationelective
UET30819Certificate III in ESI - Power Systems - Distribution Cable JointingQualificationelective

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every CPC training product on the register · Search all training products

Is CPCCLSF2001A still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.