When must new enrolments into UEP40312 stop?

New enrolments are not permitted from 31 October 2019 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Is there a deadline for learners already enrolled in UEP40312?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

UEP40312 Certificate IV in ESI Generation Maintenance (Mechanical)

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

UEP40312Superseded — equivalentCertificate IV in ESI Generation Maintenance (Mechanical)
equivalent
UEP40518Superseded — equivalentCertificate IV in ESI Generation Maintenance (Mechanical)
equivalent
UEP40522CurrentCertificate IV in ESI Generation Maintenance (Mechanical)

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

UEP40312UEP40518equivalent30 October 2018
The register records this supersession but attaches no note on what changed.

Is UEP40312 on your scope?

This page is the register's record of one product. What it cannot tell you is whether UEP40312 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What UEP40312 is made of

training.gov.au lists 92 units for UEP40312: 0 core and 1 elective, and 91 units it marks neither. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Elective units 1 listed

Code	Unit	In this product
CPCCCM2007B	Use explosive power tools	not current

Units the register marks neither core nor elective 91 listed

Code	Unit	Core or elective	In this product
BSBCUS401B	Coordinate implementation of customer service strategies	`N/A`	not current
BSBINM401A	IMPLEMENT WORKPLACE INFORMATION SYSTEM	`N/A`	not current
BSBINN301A	Promote innovation in a team environment	`N/A`	not current
BSBLED401A	Develop teams and individuals	`N/A`	not current
BSBMGT402A	Implement operational plan	`N/A`	not current
BSBMGT403A	Implement continuous improvement	`N/A`	not current
BSBWOR401A	Establish effective workplace relationships	`N/A`	not current
BSBWOR402A	Promote team effectiveness	`N/A`	not current
BSBWOR404B	Develop work priorities	`N/A`	not current
CPCCLDG3001A	Licence to perform dogging	`N/A`	not current
CPCCLRG3001A	Licence to perform rigging basic level	`N/A`	not current
CPCCLRG3002A	Licence to perform rigging intermediate level	`N/A`	not current
CPCCLSF2001A	Licence to erect, alter and dismantle scaffolding basic level	`N/A`	not current
MEM05004C	Perform routine oxy acetylene welding	`N/A`	not current
MEM05007C	Perform manual heating and thermal cutting	`N/A`	not current
MEM05012C	Perform routine manual metal arc welding	`N/A`	not current
MEM07005C	Perform general machining	`N/A`	not current
MEM07006C	Perform lathe operations	`N/A`	not current
MEM07007C	Perform milling operations	`N/A`	not current
MEM07008D	Perform grinding operations	`N/A`	not current
MEM07011B	Perform complex milling operations	`N/A`	not current
MEM07012B	Perform complex grinding operations	`N/A`	not current
MEM07021B	Perform complex lathe operations	`N/A`	not current
MEM09002B	Interpret technical drawing	`N/A`	not current
MEM09003B	Prepare basic engineering drawing	`N/A`	not current
MEM09004B	Perform electrical/electronic detail drafting	`N/A`	not current
MEM09005B	Perform basic engineering detail drafting	`N/A`	not current
MEM09006B	Perform advanced engineering detail drafting	`N/A`	not current
MEM12003B	Perform precision mechanical measurement	`N/A`	not current
MEM12023A	Perform engineering measurements	`N/A`	not current

Show the remaining 61 units

Code	Unit	Core or elective	In this product
MEM12024A	Perform computations	`N/A`	not current
MEM18001C	Use hand tools	`N/A`	not current
MEM18002B	Use power tools/hand held operations	`N/A`	not current
MEM18003C	Use tools for precision work	`N/A`	not current
MEM18006C	Repair and fit engineering components	`N/A`	not current
MEM18007B	Maintain and repair mechanical drives and mechanical transmission assemblies	`N/A`	not current
MEM18009B	Perform levelling and alignment of machines and engineering components	`N/A`	not current
MEM18010C	Perform equipment condition monitoring and recording	`N/A`	not current
MEM18018C	Maintain pneumatic system components	`N/A`	not current
MEM18019B	Maintain pneumatic systems	`N/A`	not current
MEM18020B	Maintain hydraulic system components	`N/A`	not current
MEM18021B	Maintain hydraulic systems	`N/A`	not current
MEM18022B	Maintain fluid power controls	`N/A`	not current
MEM18055B	Dismantle, replace and assemble engineering components	`N/A`	not current
RIIHAN309A	Conduct telescopic materials handler operations	`N/A`	not current
TAEDEL301A	Provide work skill instruction	`N/A`	not current
TLILIC0012A	Licence to operate a vehicle loading crane (capacity 10 metre tonnes and above)	`N/A`	not current
TLILIC2001A	Licence to operate a forklift truck	`N/A`	not current
TLILIC2005A	Licence to operate a boom-type elevating work platform (boom length 11 metres or more)	`N/A`	not current
TLILIC3006A	Licence to operate a non-slewing mobile crane (greater than 3 tonnes capacity)	`N/A`	not current
UEENEEE101A	Apply Occupational Health and Safety regulations, codes and practices in the workplace	`N/A`	not current
UEENEEE117A	Implement and monitor energy sector OHS policies and procedures	`N/A`	not current
UEPMNT302B	Install and maintain industrial pipework	`N/A`	not current
UEPMNT303B	Maintain mechanical valves	`N/A`	not current
UEPMNT304B	Maintain mechanical pumps	`N/A`	not current
UEPMNT305B	Maintain industrial fans	`N/A`	not current
UEPMNT307B	Maintain industrial screens, strainers and filters	`N/A`	not current
UEPMNT308B	Maintain conveyors and associated equipment	`N/A`	not current
UEPMNT309B	Maintain material feeders	`N/A`	not current
UEPMNT310B	Maintain material crushers	`N/A`	not current
UEPMNT311B	Maintain fuel transport equipment	`N/A`	not current
UEPMNT312B	Maintain industrial pressure vessels	`N/A`	not current
UEPMNT313B	Maintain internal combustion engines	`N/A`	not current
UEPMNT314B	Maintain hydro turbines	`N/A`	not current
UEPMNT315B	Maintain wind turbines	`N/A`	not current
UEPMNT317B	Diagnose and repair faults in mechanical equipment	`N/A`	not current
UEPMNT318B	Conduct generator mechanical maintenance	`N/A`	not current
UEPMNT320B	Inspect and repair/replace faults in mechanical equipment/components	`N/A`	not current
UEPMNT339B	Perform sheet metal work	`N/A`	not current
UEPMNT340B	Fabricate metal structures and components	`N/A`	not current
UEPMNT367A	Install and commission stationary gas fuelled reciprocating engines	`N/A`	not current
UEPMNT368A	Repair and maintain stationary gas fuelled reciprocating engines	`N/A`	not current
UEPMNT401B	Install and maintain complex mechanical seals	`N/A`	not current
UEPMNT402B	Conduct complex levelling and alignment	`N/A`	not current
UEPMNT403B	Maintain complex mechanical valves	`N/A`	not current
UEPMNT404B	Maintain complex mechanical pumps	`N/A`	not current
UEPMNT406B	Install and maintain a steam turbine	`N/A`	not current
UEPMNT407B	Install and maintain a gas turbine	`N/A`	not current
UEPMNT408B	Install hydro turbines	`N/A`	not current
UEPMNT419B	Perform civil drafting	`N/A`	not current
UEPMNT421B	Conduct technical inspection of process plant and equipment	`N/A`	not current
UEPMNT422B	Conduct performance testing on process plant and equipment	`N/A`	not current
UEPMNT424B	Monitor efficiency of thermal steam cycle power plant	`N/A`	not current
UEPOPS202B	Apply quality systems to work	`N/A`	not current
UEPOPS301B	Conduct single energy source isolation procedures for permit to work	`N/A`	not current
UEPOPS337B	Maintain quality systems within the team	`N/A`	not current
UEPOPS338B	Facilitate effective workplace communication	`N/A`	not current
UEPOPS402B	Conduct multiple energy source isolation procedures for permit to work	`N/A`	not current
UEPOPS417B	Monitor and implement environmental plans and procedures	`N/A`	not current
UEPOPS430B	Control permit to work operations	`N/A`	not current
UEPOPS439B	Plan and organise work	`N/A`	not current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UEP training product on the register · Search all training products

Is UEP40312 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.