Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is UEP40518 on your scope?
This page is the register's record of one product. What it cannot tell you is whether UEP40518 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What UEP40518 is made of
training.gov.au lists 99 units for UEP40518: 23 core and 76 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 23 listed
| Code | Unit | In this product |
|---|---|---|
| MEM07005C | Perform general machining | !not current |
| MEM07006C | Perform lathe operations | !not current |
| MEM07007C | Perform milling operations | !not current |
| MEM07008D | Perform grinding operations | !not current |
| MEM09002B | Interpret technical drawing | !not current |
| MEM12003B | Perform precision mechanical measurement | !not current |
| MEM12023A | Perform engineering measurements | !not current |
| MEM12024A | Perform computations | !not current |
| MEM18001C | Use hand tools | !not current |
| MEM18002B | Use power tools/hand held operations | !not current |
| MEM18003C | Use tools for precision work | !not current |
| MEM18006C | Repair and fit engineering components | !not current |
| MEM18007B | Maintain and repair mechanical drives and mechanical transmission assemblies | !not current |
| MEM18009B | Perform levelling and alignment of machines and engineering components | !not current |
| MEM18055B | Dismantle, replace and assemble engineering components | !not current |
| UEENEEE101A | Apply Occupational Health and Safety regulations, codes and practices in the workplace | !not current |
| UEENEEE117A | Implement and monitor energy sector OHS policies and procedures | !not current |
| UEPOPS202 | Apply quality systems to work | !not current |
| UEPOPS337 | Maintain quality systems within the team | !not current |
| UEPOPS338 | Facilitate workplace communication | !not current |
| UEPOPS417 | Monitor and implement environmental site plans and procedures | !not current |
| UEPOPS430 | Control permit to work operations | !not current |
| UEPOPS439 | Plan and organise work | !not current |
Elective units 76 listed
| Code | Unit | In this product |
|---|---|---|
| BSBCUS401 | Coordinate implementation of customer service strategies | !not current |
| BSBINM401 | Implement workplace information system | !not current |
| BSBINN301 | Promote innovation in a team environment | !not current |
| BSBLDR402 | Lead effective workplace relationships | !not current |
| BSBLDR403 | Lead team effectiveness | !not current |
| BSBLED401 | Develop teams and individuals | !not current |
| BSBMGT402 | Implement operational plan | !not current |
| BSBMGT403 | Implement continuous improvement | !not current |
| BSBWOR404 | Develop work priorities | !not current |
| CPCCCM2007B | Use explosive power tools | !not current |
| CPCCLDG3001A | Licence to perform dogging | !not current |
| CPCCLRG3001A | Licence to perform rigging basic level | !not current |
| CPCCLRG3002A | Licence to perform rigging intermediate level | !not current |
| CPCCLSF2001A | Licence to erect, alter and dismantle scaffolding basic level | !not current |
| CPCCOHS2001A | Apply OHS requirements, policies and procedures in the construction industry | !not current |
| CPCCWHS1001 | Prepare to work safely in the construction industry | !not current |
| HLTAID001 | Provide cardiopulmonary resuscitation | !not current |
| MEM05004C | Perform routine oxy acetylene welding | !not current |
| MEM05007C | Perform manual heating and thermal cutting | !not current |
| MEM05012C | Perform routine manual metal arc welding | !not current |
| MEM07011B | Perform complex milling operations | !not current |
| MEM07012B | Perform complex grinding operations | !not current |
| MEM07021B | Perform complex lathe operations | !not current |
| MEM09003B | Prepare basic engineering drawing | !not current |
| MEM09004B | Perform electrical/electronic detail drafting | !not current |
| MEM09005B | Perform basic engineering detail drafting | !not current |
| MEM09006B | Perform advanced engineering detail drafting | !not current |
| MEM18010C | Perform equipment condition monitoring and recording | !not current |
| MEM18018C | Maintain pneumatic system components | !not current |
| MEM18019B | Maintain pneumatic systems | !not current |
Show the remaining 46 elective units
| Code | Unit | In this product |
|---|---|---|
| MEM18020B | Maintain hydraulic system components | !not current |
| MEM18021B | Maintain hydraulic systems | !not current |
| MEM18022B | Maintain fluid power controls | !not current |
| RIIHAN309E | Conduct telescopic materials handler operations | !not current |
| TAEDEL301 | Provide work skill instruction | !not current |
| TLILIC0002 | Licence to operate a vehicle loading crane (capacity 10 metre tonnes and above) | !not current |
| TLILIC0003 | Licence to operate a forklift truck | ●current |
| TLILIC0005 | Licence to operate a boom-type elevating work platform (boom length 11 metres or more) | ●current |
| TLILIC0008 | Licence to operate a non-slewing mobile crane (greater than 3 tonnes capacity) | !not current |
| UEENEEE102A | Fabricate, assemble and dismantle utilities industry components | !not current |
| UEENEEE104A | Solve problems in d.c. circuits | !not current |
| UEENEEE105A | Fix and secure electrotechnology equipment | !not current |
| UEENEEE107A | Use drawings, diagrams, schedules, standards, codes and specifications | !not current |
| UEENEEG006A | Solve problems in single and three phase low voltage machines | !not current |
| UEENEEG033A | Solve problems in single and three phase low voltage electrical apparatus and circuits | !not current |
| UEENEEG063A | Arrange circuits, control and protection for general electrical installations | !not current |
| UEENEEG101A | Solve problems in electromagnetic devices and related circuits | !not current |
| UEENEEG102A | Solve problems in low voltage a.c. circuits | !not current |
| UEENEEG106A | Terminate cables, cords and accessories for low voltage circuits | !not current |
| UEENEEG108A | Trouble-shoot and repair faults in low voltage electrical apparatus and circuits | !not current |
| UEPMNT302 | Install and maintain industrial pipe work | ●current |
| UEPMNT303 | Maintain mechanical valves | ●current |
| UEPMNT304 | Maintain mechanical pumps | ●current |
| UEPMNT305 | Maintain industrial fans | ●current |
| UEPMNT307 | Maintain industrial screens, strainers and filters | ●current |
| UEPMNT308 | Maintain conveyors and associated equipment | ●current |
| UEPMNT309 | Maintain material feeders | ●current |
| UEPMNT310 | Maintain material crushers | ●current |
| UEPMNT312 | Maintain industrial pressure vessels | ●current |
| UEPMNT314 | Maintain hydro turbines | ●current |
| UEPMNT317 | Diagnose and repair faults in mechanical equipment | ●current |
| UEPMNT318 | Conduct generator mechanical maintenance | ●current |
| UEPMNT340 | Fabricate metal structures and components | ●current |
| UEPMNT351 | Test and commission electrical equipment | ●current |
| UEPMNT367 | Install and commission stationary gas fuelled reciprocating engines | ●current |
| UEPMNT368 | Repair and maintain stationary gas fuelled reciprocating engines | ●current |
| UEPMNT401 | Install and maintain complex mechanical seals | ●current |
| UEPMNT402 | Conduct complex levelling and alignment | ●current |
| UEPMNT403 | Maintain complex mechanical valves | ●current |
| UEPMNT404 | Maintain complex mechanical pumps | ●current |
| UEPMNT408 | Install hydro turbines | ●current |
| UEPMNT419 | Perform civil drafting | ●current |
| UEPMNT421 | Conduct technical inspection of process plant and equipment | ●current |
| UEPMNT422 | Conduct performance testing on process plant and equipment | ●current |
| UEPOPS301 | Conduct single energy source isolation procedures for permit to work | !not current |
| UEPOPS402 | Conduct multiple energy source isolation procedures for permit to work | !not current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every UEP training product on the register · Search all training products
Is UEP40518 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.