Can an RTO still enrol new students in UEENEEG102A?

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 5 October 2021. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Is there a deadline for learners already enrolled in UEENEEG102A?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

UEENEEG102A Solve problems in low voltage a.c. circuits

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

UEENEEG102ASuperseded — equivalentSolve problems in low voltage a.c. circuits
equivalent
UEEEL0020CurrentSolve problems in low voltage a.c. circuits

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

UEENEEG002BUEENEEG102Aequivalent28 July 2011
The register records this supersession but attaches no note on what changed.
UEENEEG102AUEEEL0020equivalent4 October 2020
The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for UEENEEG102A and for its training package UEE07 (release 4.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

UEENEEG102A_R3.pdfUEENEEG102A release 3 · product document · published 15 August 2013
UEENEEG102A_R3.docxUEENEEG102A release 3 · product document · published 26 November 2024

Is UEENEEG102A on your scope?

This page is the register's record of one product. What it cannot tell you is whether UEENEEG102A sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

Where UEENEEG102A is used

training.gov.au lists UEENEEG102A inside 75 training products, 1 of them current. Every one of them is below, with the register's own core or elective flag for UEENEEG102A in that product.

Current products 1 listed

Code	Training product	Type	UEENEEG102A is
MEM31219	Certificate III in Engineering - Industrial Electrician	Qualification	core

Products no longer current 74 listed

The register still records UEENEEG102A inside these, but it no longer recommends them as current. They are here because a scope history or an old enrolment can still point at them.

Code	Training product	Type	UEENEEG102A is
MEM31215	Certificate III in Engineering - Industrial Electrician	Qualification	core
UEE30611	Certificate III in Electrical Machine Repair	Qualification	core
UEE30711	Certificate III in Switchgear and Controlgear	Qualification	core
UEE30811	Certificate III in Electrotechnology Electrician	Qualification	core
UEE33011	Certificate III in Electrical Fitting	Qualification	core
UEE40211	Certificate IV in Electrical - Data and Voice Communications	Qualification	core
UEE40311	Certificate IV in Installation Inspection and Audits	Qualification	core
UEE40411	Certificate IV in Electrical - Instrumentation	Qualification	core
UEE40511	Certificate IV in Electrical - Air-conditioning Split Systems	Qualification	core
UEE40611	Certificate IV in Electrotechnology - Systems Electrician	Qualification	core

Show the remaining 64 products no longer current

Code	Training product	Type	UEENEEG102A is
UEE40811	Certificate IV in Electrical - Fire Protection Control Systems	Qualification	core
UEE40911	Certificate IV in Industrial Electronics and Control	Qualification	core
UEE41011	Certificate IV in Energy Management and Control	Qualification	core
UEE41111	Certificate IV in Electrical - Lift Systems	Qualification	core
UEE41211	Certificate IV in Electrical - Rail Signalling	Qualification	core
UEE41911	Certificate IV in Electrical - Renewable Energy	Qualification	core
UEE42011	Certificate IV in Electrical - Photovoltaic systems	Qualification	core
UEE42111	Certificate IV in Electrotechnology - Electrical Contracting	Qualification	core
UEE42611	Certificate IV in Hazardous areas - Electrical	Qualification	core
UEE43011	Certificate IV in Electrical Equipment and Systems	Qualification	core
UEE43111	Certificate IV in Energy Efficiency and Assessment	Qualification	core
UEE43211	Certificate IV in Industrial Automation and Control	Qualification	elective
UEE50211	Diploma of Electrical and Instrumentation	Qualification	core
UEE50311	Diploma of Electrical and Refrigeration and Air-conditioning	Qualification	core
UEE50411	Diploma of Electrical Engineering	Qualification	core
UEE50711	Diploma of Renewable Energy Engineering	Qualification	core
UEE50911	Diploma of Industrial Electronics and Control Engineering	Qualification	core
UEE53011	Diploma of Electrical Systems Engineering	Qualification	core
UEE60611	Advanced Diploma of Industrial Electronics and Control Engineering	Qualification	core
UEE60911	Advanced Diploma of Renewable Energy Engineering	Qualification	core
UEE61111	Advanced Diploma of Automated Systems Maintenance Engineering	Qualification	elective
UEE61211	Advanced Diploma of Engineering - Explosion protection	Qualification	core
UEE62011	Advanced Diploma of Engineering Technology - Renewable Energy	Qualification	core
UEE62111	Advanced Diploma of Engineering Technology - Electrical	Qualification	core
UEE62211	Advanced Diploma of Electrical - Engineering	Qualification	core
UEE62311	Advanced Diploma of Electrical Engineering - Coal Mining	Qualification	core
UEE63011	Advanced Diploma of Electrical Systems Engineering	Qualification	core
UEP40318	Certificate IV in ESI Generation Maintenance - Electrical Electronics	Qualification	core
UEP40418	Certificate IV in ESI Generation Maintenance (Fabrication)	Qualification	elective
UEP40512	Certificate IV in ESI Generation Maintenance - Electrical Electronics	Qualification	elective
UEP40518	Certificate IV in ESI Generation Maintenance (Mechanical)	Qualification	elective
UEP40612	Certificate IV in Large Scale Wind Generation - Electrical	Qualification	core
UEP40618	Certificate IV in Large Scale Wind Generation - Electrical	Qualification	core
UEP50318	Diploma of ESI Generation (Maintenance)	Qualification	core
UEP50412	Diploma of ESI Generation Maintenance - Electrical Electronic	Qualification	elective
UEP50418	Diploma of ESI Generation Maintenance - Electrical Electronic	Qualification	core
UET30512	Certificate III in ESI - Power Systems - Transmission Overhead	Qualification	elective
UET30519	Certificate III in ESI - Power Systems - Transmission Overhead	Qualification	core
UET30612	Certificate III in ESI - Power Systems - Distribution Overhead	Qualification	elective
UET30619	Certificate III in ESI - Power Systems - Distribution Overhead	Qualification	core
UET30712	Certificate III in ESI - Power Systems - Rail Traction	Qualification	elective
UET30719	Certificate III in ESI - Power Systems - Rail Traction	Qualification	core
UET30812	Certificate III in ESI - Power Systems - Distribution Cable Jointing	Qualification	elective
UET30819	Certificate III in ESI - Power Systems - Distribution Cable Jointing	Qualification	core
UET40412	Certificate IV in ESI - Network Systems	Qualification	elective
UET40419	Certificate IV in ESI - Network Systems	Qualification	core
UET40421	Certificate IV in ESI - Network Systems	Qualification	core
UET40512	Certificate IV in ESI - Power Systems Substations	Qualification	core
UET40519	Certificate IV in ESI - Power Systems Substations	Qualification	core
UET40521	Certificate IV in ESI - Power Systems Substations	Qualification	core
UET40612	Certificate IV in ESI - Power Systems Network Infrastructure	Qualification	core
UET40619	Certificate IV in ESI - Power Systems Network Infrastructure	Qualification	core
UET40621	Certificate IV in ESI - Power Systems Network Infrastructure	Qualification	core
UET50212	Diploma of ESI - Power Systems	Qualification	core
UET50219	Diploma of ESI - Power Systems	Qualification	core
UET50221	Diploma of ESI - Power Systems	Qualification	core
UET50312	Diploma of ESI - Power Systems Operations	Qualification	core
UET50319	Diploma of ESI - Power Systems Operations	Qualification	core
UET50321	Diploma of ESI - Power Systems Operations	Qualification	core
UET60212	Advanced Diploma of ESI - Power Systems	Qualification	core
UET60219	Advanced Diploma of ESI - Power Systems	Qualification	core
UET60221	Advanced Diploma of ESI - Power Systems	Qualification	core
UET60312	Advanced Diploma of ESI - Power Systems Operations	Qualification	core
UET60319	Advanced Diploma of ESI - Power Systems Operations	Qualification	core

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UEE training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

Also alert me when a cutoff in this scope changes. Ticking this keeps alert emails on for this address — they start once your RTO is on the free watch (one minute from the panel link in the email), and every alert has a one-click stop.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is UEENEEG102A still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.