UEP40618 Certificate IV in Large Scale Wind Generation - Electrical

Supersededtraining.gov.au: supersededNonEquivalent

The currency period for UEP40618 ended on 18 April 2022 — 4 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 20 April 2023 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
UEP — Electricity Supply Industry - Generation Sector Training Package
Currency period ends
18 April 2022
Latest release
Release 1 · 31 October 2018
Supersedes
UEP40612
Superseded by
UEP40622 not equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. UEP40618Superseded — not equivalentCertificate IV in Large Scale Wind Generation - Electrical
  2. not equivalent
  3. UEP40622CurrentCertificate IV in Wind Power Generation

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • UEP40612UEP40618equivalent30 October 2018

    The register records this supersession but attaches no note on what changed.

  • UEP40618UEP40622not equivalent19 April 2022

    The register records this supersession but attaches no note on what changed.

Is UEP40618 on your scope?

This page is the register's record of one product. What it cannot tell you is whether UEP40618 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What UEP40618 is made of

training.gov.au lists 92 units for UEP40618: 21 core and 71 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 21 listed

CodeUnitIn this product
UEENEEE038BParticipate in development and follow a personal competency development plannot current
UEENEEE101AApply Occupational Health and Safety regulations, codes and practices in the workplacenot current
UEENEEE102AFabricate, assemble and dismantle utilities industry componentsnot current
UEENEEE104ASolve problems in d.c. circuitsnot current
UEENEEE105AFix and secure electrotechnology equipmentnot current
UEENEEE107AUse drawings, diagrams, schedules, standards, codes and specificationsnot current
UEENEEE117AImplement and monitor energy sector OHS policies and proceduresnot current
UEENEEE137ADocument and apply measures to control OHS risks associated with electrotechnology worknot current
UEENEEE185AWrite work activity reportsnot current
UEENEEG006ASolve problems in single and three phase low voltage machinesnot current
UEENEEG033ASolve problems in single and three phase low voltage electrical apparatus and circuitsnot current
UEENEEG063AArrange circuits, control and protection for general electrical installationsnot current
UEENEEG101ASolve problems in electromagnetic devices and related circuitsnot current
UEENEEG102ASolve problems in low voltage a.c. circuitsnot current
UEENEEG106ATerminate cables, cords and accessories for low voltage circuitsnot current
UEENEEG108ATrouble-shoot and repair faults in low voltage electrical apparatus and circuitsnot current
UEENEEG109ADevelop and connect electrical control circuitsnot current
UEENEEG199AConduct compliance and functional verification of electrical apparatus and existing circuitsnot current
UEENEEK145AImplement and monitor energy sector environmental and sustainable policies and proceduresnot current
UEPMNT202Carry out routine work activities in an ESI large scale wind generation environmentnot current
UEPMNT371Maintain large scale wind turbine generatorsnot current

Elective units 71 listed

CodeUnitIn this product
UEENEEC001BMaintain documentationnot current
UEENEEC010BDeliver a service to customersnot current
UEENEED101AUse computer applications relevant to a workplacenot current
UEENEED104AUse engineering applications software on personal computersnot current
UEENEEE009BComply with scheduled and preventative maintenance program processesnot current
UEENEEE119ASolve problems in multiple path extra low voltage (ELV) a.c. circuitsnot current
UEENEEF102AInstall and maintain cabling for multiple access to telecommunication servicesnot current
UEENEEF104AInstall and modify performance data communication copper cablingnot current
UEENEEF105AInstall and modify optical fibre performance data communication cablingnot current
UEENEEF107ASet up and configure the wireless capabilities of communications and data storage devicesnot current
UEENEEF108ASelect and arrange equipment for wireless communication networksnot current
UEENEEF111ATest, report and rectify faults in data and voice installationsnot current
UEENEEG110AFind and repair faults in LV d.c. electrical apparatus and circuitsnot current
UEENEEG111ACarry out basic repairs to electrical components and equipmentnot current
UEENEEG116ADiagnose and rectify faults in traction lift systemsnot current
UEENEEG129AOverhaul and repair major switchgear and controlgearnot current
UEENEEG150AWind electrical coilsnot current
UEENEEG151APlace and connect electrical coilsnot current
UEENEEG153ARewind three phase low voltage induction machinesnot current
UEENEEG157AConduct electrical tests on LV electrical machinesnot current
UEENEEG159AConduct mechanical tests on electrical machines and componentsnot current
UEENEEG164ARepair and maintain mechanical components of electrical machinesnot current
UEENEEG165AMaintain and service traction lifts systems and equipmentnot current
UEENEEH102ARepairs basic electronic apparatus faults by replacement of componentsnot current
UEENEEH111ATroubleshoot single phase input d.c. power suppliesnot current
UEENEEH114ATroubleshoot resonance circuits in an electronic apparatusnot current
UEENEEH169ASolve problems in basic electronic circuitsnot current
UEENEEI101AUse instrumentation drawings, specification, standards and equipment manualsnot current
UEENEEI116AAssemble, enter and verify operating instructions in microprocessor equipped devicesnot current
UEENEEI150ADevelop, enter and verify discrete control programs for programmable controllersnot current
Show the remaining 41 elective units
CodeUnitIn this product
UEENEEK142AApply environmentally and sustainable procedures in the energy sectornot current
UEPMNT369Monitor climatic conditions for renewable electricity generationnot current
UEPMNT370Maintain and monitor wind farm civil assetsnot current
UEPMNT442Maintain wind turbine generator electrical systemsnot current
UEPMNT443Maintain wind turbine generator control systemsnot current
UEPMNT444Maintain wind turbine generator mechanical systemsnot current
UEPMNT445Diagnose and repair faults in large scale wind turbine generatorsnot current
UEPMNT446Coordinate maintenance on a wind farmnot current
UEPMNT447Diagnose and repair faults in wind turbine generator electrical systemsnot current
UEPMNT448Diagnose and repair faults in wind turbine generator control systemsnot current
UEPMNT449Diagnose and repair mechanical systems faults in wind turbine generatorsnot current
UEPMNT450Test and commission wind turbine generatorsnot current
UEPOPS301Conduct single energy source isolation procedures for permit to worknot current
UEPOPS349Operate local H.V. switchgearnot current
UEPOPS402Conduct multiple energy source isolation procedures for permit to worknot current
UEPOPS424Coordinate local H.V. networksnot current
UEPOPS428Develop H.V. switching programsnot current
UEPOPS456Perform switching to a switching programnot current
UETTDRCJ21ALay ESI electrical cablesnot current
UETTDRCJ26AInstall and maintain de-energised low voltage underground polymeric cablesnot current
UETTDRCJ27AInstall and maintain de-energised high voltage underground polymeric cablesnot current
UETTDRDP12AMaintain overhead energised low voltage conductors and cablesnot current
UETTDREL11AApply sustainable energy and environmental proceduresnot current
UETTDREL12AOperate plant and equipment near live electrical conductors and apparatusnot current
UETTDREL16AWorking safely near live electrical apparatusnot current
UETTDRIS41AInstall network infrastructure electrical equipmentnot current
UETTDRIS42AMaintain network infrastructure electrical equipmentnot current
UETTDRIS44APerform HV field switching operation to a given schedulenot current
UETTDRIS52AInstall and maintain poles, structures and associated hardwarenot current
UETTDRIS54AInstall and maintain poles, structures and overhead conductors and cablesnot current
UETTDRIS55AInstall and maintain low voltage underground servicesnot current
UETTDRIS56AInstall and maintain low voltage overhead servicesnot current
UETTDRIS67ASolve problems in energy supply network equipmentnot current
UETTDRRT21AInstall traction overhead wiring systemsnot current
UETTDRRT22AMaintain traction overhead wiring systemsnot current
UETTDRRT23AInstall rail traction bondsnot current
UETTDRRT27AInstall overhead traction components and equipmentnot current
UETTDRRT28AMaintain overhead traction components and equipmentnot current
UETTDRTP26AInstall transmission structures and associated hardwarenot current
UETTDRTP27AMaintain transmission structures and associated hardwarenot current
UETTDRTP29AInstall and maintain transmission overhead conductors and cablesnot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UEP training product on the register · Search all training products

Is UEP40618 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.