Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
- UET40612Superseded — equivalentCertificate IV in ESI - Power Systems Network Infrastructure
- =equivalent
- UET40619Superseded — equivalentCertificate IV in ESI - Power Systems Network Infrastructure
- =equivalent
- UET40621Deleted from the registerCertificate IV in ESI - Power Systems Network Infrastructure
The register does not list a current endpoint for this chain: UET40621 is the last product it points at, and UET40621 is not marked current either.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Official documents on the register
What training.gov.au lists for UET40612 and for its training package UET12 (release 2.1), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.
Is UET40612 on your scope?
This page is the register's record of one product. What it cannot tell you is whether UET40612 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What UET40612 is made of
training.gov.au lists 52 units for UET40612: 22 core and 30 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 22 listed
| Code | Unit | In this product |
|---|---|---|
| UEENEEE101A | Apply Occupational Health and Safety regulations, codes and practices in the workplace | !not current |
| UEENEEE102A | Fabricate, assemble and dismantle utilities industry components | !not current |
| UEENEEE104A | Solve problems in d.c. circuits | !not current |
| UEENEEE105A | Fix and secure electrotechnology equipment | !not current |
| UEENEEE107A | Use drawings, diagrams, schedules, standards, codes and specifications | !not current |
| UEENEEE137A | Document and apply measures to control OHS risks associated with electrotechnology work | !not current |
| UEENEEG006A | Solve problems in single and three phase low voltage machines | !not current |
| UEENEEG033A | Solve problems in single and three phase low voltage electrical apparatus and circuits | !not current |
| UEENEEG063A | Arrange circuits, control and protection for general electrical installations | !not current |
| UEENEEG101A | Solve problems in electromagnetic devices and related circuits | !not current |
| UEENEEG102A | Solve problems in low voltage a.c. circuits | !not current |
| UEENEEG103A | Install low voltage wiring and accessories | !not current |
| UEENEEG104A | Install appliances, switchgear and associated accessories for low voltage electrical installations | !not current |
| UEENEEG105A | Verify compliance and functionality of low voltage general electrical installations | !not current |
| UEENEEG106A | Terminate cables, cords and accessories for low voltage circuits | !not current |
| UEENEEG107A | Select wiring systems and cables for low voltage general electrical installations | !not current |
| UEENEEG108A | Trouble-shoot and repair faults in low voltage electrical apparatus and circuits | !not current |
| UEENEEG109A | Develop and connect electrical control circuits | !not current |
| UEENEEK142A | Apply environmentally and sustainable procedures in the energy sector | !not current |
| UETTDREL16A | Working safely near live electrical apparatus | !not current |
| UETTDRIS62A | Implement and monitor the power system organisational OHS policies, procedures and programs | !not current |
| UETTDRIS63A | Implement and monitor the power system environmental and sustainable energy management policies and procedures | !not current |
Elective units 30 listed
| Code | Unit | In this product |
|---|---|---|
| BSBINM401A | IMPLEMENT WORKPLACE INFORMATION SYSTEM | !not current |
| BSBMGT402A | Implement operational plan | !not current |
| BSBMGT403A | Implement continuous improvement | !not current |
| BSBWOR401A | Establish effective workplace relationships | !not current |
| BSBWOR402A | Promote team effectiveness | !not current |
| UEENEEG076A | Install and replace low voltage current transformer metering | !not current |
| UEENEEG171A | Install, set up and commission interval metering | !not current |
| UETTDRCJ33A | Install and maintain network infrastructure LV underground cables | !not current |
| UETTDRCJ34A | Install and maintain network infrastructure HV underground cables | !not current |
| UETTDRDP15A | Inspect, maintain and restore energised low voltage overhead distribution network infrastructure | !not current |
| UETTDRIS43A | Perform low voltage field switching operation to a given schedule | !not current |
| UETTDRIS44A | Perform HV field switching operation to a given schedule | !not current |
| UETTDRIS45A | Perform power system substation switching operation to a given schedule | !not current |
| UETTDRIS46A | Install and maintain ESI network infrastructure electrical equipment | !not current |
| UETTDRIS47A | Sample, test, filter and reinstate insulating oil | !not current |
| UETTDRIS48A | Develop high voltage switching schedule | !not current |
| UETTDRIS49A | Develop low voltage switching schedule | !not current |
| UETTDRIS50A | Coordinate power system permit procedures | !not current |
| UETTDRIS51A | Coordinate and direct power system switching schedules | !not current |
| UETTDRIS67A | Solve problems in energy supply network equipment | !not current |
| UETTDRIS68A | Solve problems in energy supply network protection equipment and systems | !not current |
| UETTDRRT34A | Install and maintain traction network wiring systems | !not current |
| UETTDRRT35A | Install and maintain traction network equipment and components | !not current |
| UETTDRRT36A | Maintain traction network wiring systems | !not current |
| UETTDRRT37A | Maintain traction network equipment and components | !not current |
| UETTDRSB39A | Perform power system substation switching operation to a given schedule | !not current |
| UETTDRTP34A | Install/maintain overhead transmission network infrastructure | !not current |
| UETTDRTP35A | Install/maintain transmission network infrastructure electrical equipment | !not current |
| UETTDRTS37A | Perform current injection testing using phantom load | !not current |
| UETTDRTS38A | Install and replace high voltage metering and associated equipment | !not current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every UET training product on the register · Search all training products
Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.
No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.
Is UET40612 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.