UEENEEG104A Install appliances, switchgear and associated accessories for low voltage electrical installations

deletedthe status token training.gov.au records

Item 14

The one year of s 14(1)(c), counted from the date this product was removed from the National Register, ended before the instrument commenced on 1 July 2025 — so no completion date is shown here: the instrument imposes nothing before that day.

For an RTO registered by ASQA, nobody may be allowed to commence training and assessment in UEENEEG104A today. training.gov.au lists it as Deleted, and s 14(2) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025) requires the organisation to ensure it does not allow individuals to commence training and assessment in a training product that has expired, been removed or deleted from the National Register. s 14(2) carries no transition period of its own and no date to compute, and the “unless otherwise approved by the National VET Regulator” opening sits in s 14(1) only. It governs starts, not learners already enrolled: s 14(2) sets no date of its own for them — their completion period under s 14(1)(b)/(c) is stated separately on this page. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

The status above is the one training.gov.au records for UEENEEG104A, written exactly as the register writes it. It is not one of the three we put into words, so we leave it in the register's own terms.

Product type
Unit of competency
Training package
UEE07 — Electrotechnology Training Package
Currency period ends
3 October 2020
Latest release
Release 3 · 14 August 2013 · 3 releases in all
Supersedes
UEENEEG004B
Superseded by
nothing — no replacement listed

Where the register points next

training.gov.au does not publish a supersession path from UEENEEG104A. There is no chain to follow from here.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • UEENEEG004BUEENEEG104Aequivalent30 July 2011

    The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for UEENEEG104A and for its training package UEE07 (release 4.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

Is UEENEEG104A on your scope?

This page is the register's record of one product. What it cannot tell you is whether UEENEEG104A sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — we keep neither the code nor the answer; what remains is the two-minute abuse counter described on our privacy page.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

Where UEENEEG104A is used

training.gov.au lists UEENEEG104A inside 32 training products, none of them current. Every one of them is below, with the register's own core or elective flag for UEENEEG104A in that product.

Products no longer current 32 listed

The register still records UEENEEG104A inside these, but it no longer recommends them as current. They are here because a scope history or an old enrolment can still point at them.

CodeTraining productTypeUEENEEG104A is
UEE30811Certificate III in Electrotechnology ElectricianQualificationcore
UEE40211Certificate IV in Electrical - Data and Voice CommunicationsQualificationcore
UEE40311Certificate IV in Installation Inspection and AuditsQualificationcore
UEE40411Certificate IV in Electrical - InstrumentationQualificationcore
UEE40511Certificate IV in Electrical - Air-conditioning Split SystemsQualificationcore
UEE40611Certificate IV in Electrotechnology - Systems ElectricianQualificationcore
UEE40811Certificate IV in Electrical - Fire Protection Control SystemsQualificationcore
UEE40911Certificate IV in Industrial Electronics and ControlQualificationcore
UEE41011Certificate IV in Energy Management and ControlQualificationcore
UEE41111Certificate IV in Electrical - Lift SystemsQualificationcore
Show the remaining 22 products no longer current
CodeTraining productTypeUEENEEG104A is
UEE41211Certificate IV in Electrical - Rail SignallingQualificationcore
UEE41911Certificate IV in Electrical - Renewable EnergyQualificationcore
UEE42011Certificate IV in Electrical - Photovoltaic systemsQualificationcore
UEE42111Certificate IV in Electrotechnology - Electrical ContractingQualificationcore
UEE42611Certificate IV in Hazardous areas - ElectricalQualificationcore
UEE43111Certificate IV in Energy Efficiency and AssessmentQualificationcore
UEE50211Diploma of Electrical and InstrumentationQualificationcore
UEE50311Diploma of Electrical and Refrigeration and Air-conditioningQualificationcore
UEE50411Diploma of Electrical EngineeringQualificationcore
UEE50711Diploma of Renewable Energy EngineeringQualificationcore
UEE50911Diploma of Industrial Electronics and Control EngineeringQualificationcore
UEE60611Advanced Diploma of Industrial Electronics and Control EngineeringQualificationcore
UEE60911Advanced Diploma of Renewable Energy EngineeringQualificationcore
UEE61211Advanced Diploma of Engineering - Explosion protectionQualificationcore
UEE62211Advanced Diploma of Electrical - EngineeringQualificationcore
UEE62311Advanced Diploma of Electrical Engineering - Coal MiningQualificationcore
UET40512Certificate IV in ESI - Power Systems SubstationsQualificationcore
UET40519Certificate IV in ESI - Power Systems SubstationsQualificationcore
UET40521Certificate IV in ESI - Power Systems SubstationsQualificationcore
UET40612Certificate IV in ESI - Power Systems Network InfrastructureQualificationcore
UET40619Certificate IV in ESI - Power Systems Network InfrastructureQualificationcore
UET40621Certificate IV in ESI - Power Systems Network InfrastructureQualificationcore

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UEE training product on the register · Search all training products

Take this with you — one email with how the register lists UEENEEG104A today. Its dates need the full read this page does, and the email says so rather than estimating them. Nothing scheduled after it.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is UEENEEG104A still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.