Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
- UET40512Superseded — equivalentCertificate IV in ESI - Power Systems Substations
- =equivalent
- UET40519Superseded — equivalentCertificate IV in ESI - Power Systems Substations
- =equivalent
- UET40521Superseded — equivalentCertificate IV in ESI - Power Systems Substations
- =equivalent
- UET40522CurrentCertificate IV in ESI - Substations
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Official documents on the register
What training.gov.au lists for UET40512 and for its training package UET12 (release 2.1), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.
Is UET40512 on your scope?
This page is the register's record of one product. What it cannot tell you is whether UET40512 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What UET40512 is made of
training.gov.au lists 48 units for UET40512: 24 core and 24 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 24 listed
| Code | Unit | In this product |
|---|---|---|
| UEENEEE101A | Apply Occupational Health and Safety regulations, codes and practices in the workplace | !not current |
| UEENEEE102A | Fabricate, assemble and dismantle utilities industry components | !not current |
| UEENEEE104A | Solve problems in d.c. circuits | !not current |
| UEENEEE105A | Fix and secure electrotechnology equipment | !not current |
| UEENEEE107A | Use drawings, diagrams, schedules, standards, codes and specifications | !not current |
| UEENEEE137A | Document and apply measures to control OHS risks associated with electrotechnology work | !not current |
| UEENEEG006A | Solve problems in single and three phase low voltage machines | !not current |
| UEENEEG033A | Solve problems in single and three phase low voltage electrical apparatus and circuits | !not current |
| UEENEEG063A | Arrange circuits, control and protection for general electrical installations | !not current |
| UEENEEG101A | Solve problems in electromagnetic devices and related circuits | !not current |
| UEENEEG102A | Solve problems in low voltage a.c. circuits | !not current |
| UEENEEG103A | Install low voltage wiring and accessories | !not current |
| UEENEEG104A | Install appliances, switchgear and associated accessories for low voltage electrical installations | !not current |
| UEENEEG105A | Verify compliance and functionality of low voltage general electrical installations | !not current |
| UEENEEG106A | Terminate cables, cords and accessories for low voltage circuits | !not current |
| UEENEEG107A | Select wiring systems and cables for low voltage general electrical installations | !not current |
| UEENEEG108A | Trouble-shoot and repair faults in low voltage electrical apparatus and circuits | !not current |
| UEENEEG109A | Develop and connect electrical control circuits | !not current |
| UEENEEK142A | Apply environmentally and sustainable procedures in the energy sector | !not current |
| UETTDREL16A | Working safely near live electrical apparatus | !not current |
| UETTDRIS62A | Implement and monitor the power system organisational OHS policies, procedures and programs | !not current |
| UETTDRIS63A | Implement and monitor the power system environmental and sustainable energy management policies and procedures | !not current |
| UETTDRSB22A | Carry out power systems substation inspection | !not current |
| UETTDRSB23A | Install and maintain substation direct current systems | !not current |
Elective units 24 listed
| Code | Unit | In this product |
|---|---|---|
| BSBINM401A | IMPLEMENT WORKPLACE INFORMATION SYSTEM | !not current |
| BSBMGT402A | Implement operational plan | !not current |
| BSBMGT403A | Implement continuous improvement | !not current |
| BSBWOR401A | Establish effective workplace relationships | !not current |
| BSBWOR402A | Promote team effectiveness | !not current |
| UETTDRIS47A | Sample, test, filter and reinstate insulating oil | !not current |
| UETTDRIS67A | Solve problems in energy supply network equipment | !not current |
| UETTDRIS68A | Solve problems in energy supply network protection equipment and systems | !not current |
| UETTDRSB21A | Diagnose and rectify faults in substation environment | !not current |
| UETTDRSB24A | Maintain high voltage power system circuit breakers | !not current |
| UETTDRSB25A | Maintain high voltage power and instrument transformers | !not current |
| UETTDRSB26A | Install high current DC equipment and switchgear | !not current |
| UETTDRSB27A | Maintain high current DC equipment and switchgear | !not current |
| UETTDRSB29A | Maintain capacitor bank equipment for voltage regulation | !not current |
| UETTDRSB30A | Maintain high voltage power system static VAR compensators (SVC) | !not current |
| UETTDRSB31A | Maintain high voltage power system synchronous condensers | !not current |
| UETTDRSB32A | Maintain power transformer on load tap changers (OLTC) | !not current |
| UETTDRSB33A | Install high voltage plant and equipment | !not current |
| UETTDRSB34A | Carry out surveys using thermovision techniques | !not current |
| UETTDRSB35A | Maintain discrete control and protection systems | !not current |
| UETTDRSB36A | Commission discrete control and protection systems | !not current |
| UETTDRSB37A | Maintain power system distribution field devices | !not current |
| UETTDRSB38A | Commission power system distribution field devices | !not current |
| UETTDRSB39A | Perform power system substation switching operation to a given schedule | !not current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 13 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every UET training product on the register · Search all training products
Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.
No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.
Is UET40512 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.