UET40209 Certificate IV in ESI - Substation

Supersededtraining.gov.au: supersededEquivalent

The currency period for UET40209 ended on 29 April 2012 — 14 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 1 May 2013 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
UET09 — Transmission, Distribution and Rail Sector Training Package
Currency period ends
29 April 2012
Latest release
Release 1 · 21 July 2011
Supersedes
nothing — no earlier product listed
Superseded by
UET40512 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. UET40209Superseded — equivalentCertificate IV in ESI - Substation
  2. equivalent
  3. UET40512Superseded — equivalentCertificate IV in ESI - Power Systems Substations
  4. equivalent
  5. UET40519Superseded — equivalentCertificate IV in ESI - Power Systems Substations
  6. equivalent
  7. UET40521Superseded — equivalentCertificate IV in ESI - Power Systems Substations
  8. equivalent
  9. UET40522CurrentCertificate IV in ESI - Substations

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • UET40209UET40512equivalent30 April 2012

    The register records this supersession but attaches no note on what changed.

Is UET40209 on your scope?

This page is the register's record of one product. What it cannot tell you is whether UET40209 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What UET40209 is made of

training.gov.au lists 8 units for UET40209. It does not mark them core or elective: the unit grid records N/A for every one of them. The register does not publish a completion rule in units for this product, so we do not state one. What it takes to complete the product is in the packaging rules on training.gov.au.

Units listed 8 listed

CodeUnitCore or electiveIn this product
UETTDRIS05BPerform substation switching operation to a given scheduleN/Anot current
UETTDRIS22BImplement and monitor the organisational OHS policies, procedures and programsN/Anot current
UETTDRIS23BImplement and monitor environmental and sustainable energy management policies and proceduresN/Anot current
UETTDRSB01BDiagnose and rectify faults in power system substation environmentN/Anot current
UETTDRSB02BCarry out substation inspectionN/Anot current
UETTDRSB03BInstall and maintain substation DC systemsN/Anot current
UETTDRSB04BMaintain HV power system breakersN/Anot current
UETTDRSB05BMaintain HV power system - transformers and instrument transformersN/Anot current

The register publishes this unit grid without a core or elective flag, so this page does not split it into core and elective. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UET training product on the register · Search all training products

Is UET40209 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.