Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is UEE40411 on your scope?
This page is the register's record of one product. What it cannot tell you is whether UEE40411 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What UEE40411 is made of
training.gov.au lists 82 units for UEE40411: 27 core and 55 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 27 listed
| Code | Unit | In this product |
|---|---|---|
| UEENEEE038B | Participate in development and follow a personal competency development plan | !not current |
| UEENEEE101A | Apply Occupational Health and Safety regulations, codes and practices in the workplace | !not current |
| UEENEEE102A | Fabricate, assemble and dismantle utilities industry components | !not current |
| UEENEEE104A | Solve problems in d.c. circuits | !not current |
| UEENEEE105A | Fix and secure electrotechnology equipment | !not current |
| UEENEEE107A | Use drawings, diagrams, schedules, standards, codes and specifications | !not current |
| UEENEEE117A | Implement and monitor energy sector OHS policies and procedures | !not current |
| UEENEEE124A | Compile and produce an energy sector detailed report | !not current |
| UEENEEE137A | Document and apply measures to control OHS risks associated with electrotechnology work | !not current |
| UEENEEG006A | Solve problems in single and three phase low voltage machines | !not current |
| UEENEEG033A | Solve problems in single and three phase low voltage electrical apparatus and circuits | !not current |
| UEENEEG063A | Arrange circuits, control and protection for general electrical installations | !not current |
| UEENEEG101A | Solve problems in electromagnetic devices and related circuits | !not current |
| UEENEEG102A | Solve problems in low voltage a.c. circuits | !not current |
| UEENEEG103A | Install low voltage wiring and accessories | !not current |
| UEENEEG104A | Install appliances, switchgear and associated accessories for low voltage electrical installations | !not current |
| UEENEEG105A | Verify compliance and functionality of low voltage general electrical installations | !not current |
| UEENEEG106A | Terminate cables, cords and accessories for low voltage circuits | !not current |
| UEENEEG107A | Select wiring systems and cables for low voltage general electrical installations | !not current |
| UEENEEG108A | Trouble-shoot and repair faults in low voltage electrical apparatus and circuits | !not current |
| UEENEEG109A | Develop and connect electrical control circuits | !not current |
| UEENEEI101A | Use instrumentation drawings, specification, standards and equipment manuals | !not current |
| UEENEEI102A | Solve problems in pressure measurement components and systems | !not current |
| UEENEEI103A | Solve problems in density/level measurement components and systems | !not current |
| UEENEEI104A | Solve problems in flow measurement components and systems | !not current |
| UEENEEI105A | Solve problems in temperature measurement components and systems | !not current |
| UEENEEK145A | Implement and monitor energy sector environmental and sustainable policies and procedures | !not current |
Elective units 55 listed
| Code | Unit | In this product |
|---|---|---|
| CPCCOHS1001A | Work safely in the construction industry | !not current |
| HLTAID001 | Provide cardiopulmonary resuscitation | !not current |
| HLTAID009 | Provide cardiopulmonary resuscitation | ●current |
| UEENEEC001B | Maintain documentation | !not current |
| UEENEEC002B | Source and purchase material/parts for installation or service jobs | !not current |
| UEENEEC003B | Provide quotations for installation or service jobs | !not current |
| UEENEEC010B | Deliver a service to customers | !not current |
| UEENEED101A | Use computer applications relevant to a workplace | !not current |
| UEENEED104A | Use engineering applications software on personal computers | !not current |
| UEENEEE009B | Comply with scheduled and preventative maintenance program processes | !not current |
| UEENEEE020B | Provide basic instruction in the use of electrotechnology apparatus | !not current |
| UEENEEG118A | Maintain operation of electrical mining equipment and systems | !not current |
| UEENEEG119A | Maintain operation of electrical marine equipment and systems | !not current |
| UEENEEH102A | Repairs basic electronic apparatus faults by replacement of components | !not current |
| UEENEEH111A | Troubleshoot single phase input d.c. power supplies | !not current |
| UEENEEI106A | Set up and adjust PID control loops | !not current |
| UEENEEI107A | Install instrumentation and control cabling and tubing | !not current |
| UEENEEI108A | Install instrumentation and control apparatus and associated equipment | !not current |
| UEENEEI110A | Set up and adjust advanced PID process control loops | !not current |
| UEENEEI111A | Find and rectify faults in process final control elements | !not current |
| UEENEEI113A | Setup and configure Human-Machine Interface (HMI) and industrial networks | !not current |
| UEENEEI116A | Assemble, enter and verify operating instructions in microprocessor equipped devices | !not current |
| UEENEEI119A | Set up industrial field control devices | !not current |
| UEENEEI120A | Provide solutions to problems in industrial control systems | !not current |
| UEENEEI124A | Fault find and repair analogue circuits and components in electronic control systems | !not current |
| UEENEEI125A | Provide solutions to fluid circuit operations | !not current |
| UEENEEI126A | Provide solutions to pneumatic-hydraulic system operations | !not current |
| UEENEEI139A | Diagnose and rectify faults in digital controls systems | !not current |
| UEENEEI140A | Plan the electrical installation of integrated systems | !not current |
| UEENEEI141A | Develop electrical integrated systems | !not current |
Show the remaining 25 elective units
| Code | Unit | In this product |
|---|---|---|
| UEENEEI148A | Solve problems in single phase electronic power control circuits | !not current |
| UEENEEI149A | Solve problems in polyphase electronic power control circuits | !not current |
| UEENEEI150A | Develop, enter and verify discrete control programs for programmable controllers | !not current |
| UEENEEI151A | Develop, enter and verify word and analogue control programs for programmable logic controllers | !not current |
| UEENEEI152A | Develop, enter and verify programs in Supervisory Control and Data Acquisition systems | !not current |
| UEENEEM019A | Attend to breakdowns in hazardous areas - coal mining | !not current |
| UEENEEM020A | Attend to breakdowns in hazardous areas - gas atmospheres | !not current |
| UEENEEM021A | Attend to breakdowns in hazardous areas - dust atmospheres | !not current |
| UEENEEM022A | Attend to breakdowns in hazardous areas - pressurisation | !not current |
| UEENEEM023A | Install explosion-protected equipment and wiring systems - coal mining | !not current |
| UEENEEM024A | Install explosion-protected equipment and wiring systems - gas atmospheres | !not current |
| UEENEEM025A | Install explosion-protected equipment and wiring systems - dust atmospheres | !not current |
| UEENEEM026A | Install explosion-protected equipment and wiring systems - pressurisation | !not current |
| UEENEEM027A | Maintain equipment in hazardous areas - coal mining | !not current |
| UEENEEM028A | Maintain equipment in hazardous areas - gas atmospheres | !not current |
| UEENEEM029A | Maintain equipment in hazardous areas - dust atmospheres | !not current |
| UEENEEM030A | Maintain equipment in hazardous areas - pressurisation | !not current |
| UEENEEM038A | Conduct testing of hazardous areas installations - coal mining | !not current |
| UEENEEM039A | Conduct testing of hazardous areas installations - gas atmospheres | !not current |
| UEENEEM040A | Conduct testing of hazardous areas installations - dust atmospheres | !not current |
| UEENEEM041A | Conduct testing of hazardous area installations - pressurisation | !not current |
| UEENEEM042A | Conduct visual inspection of hazardous areas installations | !not current |
| UEENEEM076A | Use and maintain the integrity of a portable gas detection device | !not current |
| UEENEEM077A | Install and maintain the integrity of fixed gas detection equipment | !not current |
| UEENEEM080A | Report on the integrity of explosion-protected equipment in a hazardous area | !not current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every UEE training product on the register · Search all training products
Is UEE40411 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.