Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
UEE60107UEE62211=equivalent13 August 2009
The register records this supersession but attaches no note on what changed.
UEE60110UEE62211≠not equivalent28 July 2011
The register records this supersession but attaches no note on what changed.
UEE62211UEE62220≠not equivalent4 October 2020
The register records this supersession but attaches no note on what changed.
Is UEE62211 on your scope?
This page is the register's record of one product. What it cannot tell you is whether UEE62211 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What UEE62211 is made of
training.gov.au lists 190 units for UEE62211: 35 core and 155 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 35 listed
| Code | Unit | In this product |
|---|---|---|
| UEENEED104A | Use engineering applications software on personal computers | !not current |
| UEENEEE006B | Apply methods to maintain currency of industry developments | !not current |
| UEENEEE011C | Manage risk in electrotechnology activities | !not current |
| UEENEEE015B | Develop design briefs for electrotechnology projects | !not current |
| UEENEEE071B | Write specifications for electrical engineering projects | !not current |
| UEENEEE080A | Apply industry and community standards to engineering activities | !not current |
| UEENEEE081A | Apply material science to solving electrotechnology engineering problems | !not current |
| UEENEEE082A | Apply physics to solving electrotechnology engineering problems | !not current |
| UEENEEE083A | Establish and follow a competency development plan in an electrotechnology engineering discipline | !not current |
| UEENEEE101A | Apply Occupational Health and Safety regulations, codes and practices in the workplace | !not current |
| UEENEEE102A | Fabricate, assemble and dismantle utilities industry components | !not current |
| UEENEEE104A | Solve problems in d.c. circuits | !not current |
| UEENEEE105A | Fix and secure electrotechnology equipment | !not current |
| UEENEEE107A | Use drawings, diagrams, schedules, standards, codes and specifications | !not current |
| UEENEEE117A | Implement and monitor energy sector OHS policies and procedures | !not current |
| UEENEEE124A | Compile and produce an energy sector detailed report | !not current |
| UEENEEE125A | Provide engineering solutions for problems in complex multiple path circuits | !not current |
| UEENEEE126A | Provide solutions to basic engineering computational problems | !not current |
| UEENEEE137A | Document and apply measures to control OHS risks associated with electrotechnology work | !not current |
| UEENEEG006A | Solve problems in single and three phase low voltage machines | !not current |
| UEENEEG033A | Solve problems in single and three phase low voltage electrical apparatus and circuits | !not current |
| UEENEEG063A | Arrange circuits, control and protection for general electrical installations | !not current |
| UEENEEG101A | Solve problems in electromagnetic devices and related circuits | !not current |
| UEENEEG102A | Solve problems in low voltage a.c. circuits | !not current |
| UEENEEG103A | Install low voltage wiring and accessories | !not current |
| UEENEEG104A | Install appliances, switchgear and associated accessories for low voltage electrical installations | !not current |
| UEENEEG105A | Verify compliance and functionality of low voltage general electrical installations | !not current |
| UEENEEG106A | Terminate cables, cords and accessories for low voltage circuits | !not current |
| UEENEEG107A | Select wiring systems and cables for low voltage general electrical installations | !not current |
| UEENEEG108A | Trouble-shoot and repair faults in low voltage electrical apparatus and circuits | !not current |
Show the remaining 5 core units
| Code | Unit | In this product |
|---|---|---|
| UEENEEG109A | Develop and connect electrical control circuits | !not current |
| UEENEEG149A | Provide engineering solutions to problems in complex polyphase power circuits | !not current |
| UEENEEG169A | Manage large electrical projects | !not current |
| UEENEEG170A | Plan large electrical projects | !not current |
| UEENEEK132A | Develop strategies to address environmental and sustainability issues in the energy sector | !not current |
Elective units 155 listed
| Code | Unit | In this product |
|---|---|---|
| BSBINM501A | Manage an information or knowledge management system | !not current |
| BSBINN502A | Build and sustain an innovative work environment | !not current |
| BSBMGT502B | Manage people performance | !not current |
| BSBMGT516C | Facilitate continuous improvement | !not current |
| BSBWOR502B | Ensure team effectiveness | !not current |
| UEENEEA110A | Assemble, mount and connect control gear and switchgear | !not current |
| UEENEEA112A | Fabricate and assemble bus bars | !not current |
| UEENEEA113A | Mount and wire control panel equipment | !not current |
| UEENEEC005B | Estimate electrotechnology projects | !not current |
| UEENEEC006B | Prepare tender submissions for electrotechnology projects | !not current |
| UEENEEC007B | Manage contract variations | !not current |
| UEENEED147A | Develop energy sector directory services | !not current |
| UEENEED149A | Develop energy sector computer network applications infrastructure | !not current |
| UEENEED150A | Develop industrial control programs for microcomputer equipped devices | !not current |
| UEENEED151A | Provide programming solution for computer systems engineering problems | !not current |
| UEENEED152A | Design embedded controller control systems | !not current |
| UEENEEE110A | Develop and implement energy sector maintenance programs | !not current |
| UEENEEE121A | Plan an integrated cabling installation system | !not current |
| UEENEEE127A | Use advanced computational processes to provide solutions to energy sector engineering problems | !not current |
| UEENEEF102A | Install and maintain cabling for multiple access to telecommunication services | !not current |
| UEENEEF104A | Install and modify performance data communication copper cabling | !not current |
| UEENEEG076A | Install and replace low voltage current transformer metering | !not current |
| UEENEEG110A | Find and repair faults in LV d.c. electrical apparatus and circuits | !not current |
| UEENEEG111A | Carry out basic repairs to electrical components and equipment | !not current |
| UEENEEG113A | Install and maintain emergency safety systems | !not current |
| UEENEEG116A | Diagnose and rectify faults in traction lift systems | !not current |
| UEENEEG118A | Maintain operation of electrical mining equipment and systems | !not current |
| UEENEEG119A | Maintain operation of electrical marine equipment and systems | !not current |
| UEENEEG120A | Select and arrange equipment for special LV electrical installations | !not current |
| UEENEEG121A | Verify compliance and functionality of special LV electrical installations | !not current |
Show the remaining 125 elective units
| Code | Unit | In this product |
|---|---|---|
| UEENEEG122A | Conduct compliance inspection of single phase LV electrical installations | !not current |
| UEENEEG123A | Conduct compliance inspection of LV electrical installations with demand exceeding 100 A per phase | !not current |
| UEENEEG124A | Conduct compliance inspection of special LV electrical installations | !not current |
| UEENEEG125A | Plan electrical installations with a low voltage demand up to 400 A per phase | !not current |
| UEENEEG126A | Install and maintain field power and distribution systems with a low voltage demand up to 200 A per phase | !not current |
| UEENEEG127A | Design electrical installations with a low voltage demand greater than 400 A per phase | !not current |
| UEENEEG128A | Plan low voltage switchboard and control panel layouts | !not current |
| UEENEEG129A | Overhaul and repair major switchgear and controlgear | !not current |
| UEENEEG130A | Design switchboards rated for high fault levels (greater than 400 A) | !not current |
| UEENEEG131A | Evaluate performance of low voltage electrical apparatus | !not current |
| UEENEEG132A | Carry out low voltage electrical field testing and report findings | !not current |
| UEENEEG145A | Develop engineering solutions for induction machine and control problems | !not current |
| UEENEEG150A | Wind electrical coils | !not current |
| UEENEEG151A | Place and connect electrical coils | !not current |
| UEENEEG152A | Rewind single phase machines | !not current |
| UEENEEG153A | Rewind three phase low voltage induction machines | !not current |
| UEENEEG154A | Rewind LV direct current machines | !not current |
| UEENEEG155A | Rewind HV three phase induction machines rated for voltages to 3.3 kV | !not current |
| UEENEEG156A | Rewind HV three phase induction machines rated for voltages above 3.3 kV | !not current |
| UEENEEG157A | Conduct electrical tests on LV electrical machines | !not current |
| UEENEEG158A | Conduct electrical tests on HV electrical machines | !not current |
| UEENEEG159A | Conduct mechanical tests on electrical machines and components | !not current |
| UEENEEG160A | Evaluate performance of LV electrical machines | !not current |
| UEENEEG161A | Design and develop modifications to LV electrical machines | !not current |
| UEENEEG162A | Set up and place LV electrical apparatus and associated circuits into service | !not current |
| UEENEEG164A | Repair and maintain mechanical components of electrical machines | !not current |
| UEENEEG165A | Maintain and service traction lifts systems and equipment | !not current |
| UEENEEG166A | Install and maintain escalators, moving walks and treadways | !not current |
| UEENEEG167A | Align and install traction lift equipment | !not current |
| UEENEEG168A | Diagnose and rectify faults in complex lift systems | !not current |
| UEENEEG171A | Install, set up and commission interval metering | !not current |
| UEENEEG172A | Investigate and report on electrical incidents and causes | !not current |
| UEENEEG175A | Develop compliance policies and plans to conduct a electrical contracting business | !not current |
| UEENEEG177A | Select low voltage power factor correction equipment | !not current |
| UEENEEG179A | Develop detailed electrical drawings | !not current |
| UEENEEG181A | Provide advice on effective and energy efficient lighting products | !not current |
| UEENEEG182A | Supply effective and efficient lighting products for domestic and small commercial applications | !not current |
| UEENEEG183A | Provide advice on the application of energy efficient lighting for ambient and aesthetic effect | !not current |
| UEENEEG184A | Provide photometric data for illumination system design | !not current |
| UEENEEG185A | Select effective and efficient light sources and luminaries for given locations and designs | !not current |
| UEENEEG186A | Design effective and efficient lighting for residential and commercial buildings | !not current |
| UEENEEG188A | Prepare quotations for the supply of effective and efficient lighting products for lighting projects | !not current |
| UEENEEG189A | Install and maintain emergency lighting systems | !not current |
| UEENEEH102A | Repairs basic electronic apparatus faults by replacement of components | !not current |
| UEENEEH111A | Troubleshoot single phase input d.c. power supplies | !not current |
| UEENEEH150A | Assemble and set up basic security systems | !not current |
| UEENEEI101A | Use instrumentation drawings, specification, standards and equipment manuals | !not current |
| UEENEEI102A | Solve problems in pressure measurement components and systems | !not current |
| UEENEEI103A | Solve problems in density/level measurement components and systems | !not current |
| UEENEEI104A | Solve problems in flow measurement components and systems | !not current |
| UEENEEI105A | Solve problems in temperature measurement components and systems | !not current |
| UEENEEI116A | Assemble, enter and verify operating instructions in microprocessor equipped devices | !not current |
| UEENEEI119A | Set up industrial field control devices | !not current |
| UEENEEI120A | Provide solutions to problems in industrial control systems | !not current |
| UEENEEI124A | Fault find and repair analogue circuits and components in electronic control systems | !not current |
| UEENEEI125A | Provide solutions to fluid circuit operations | !not current |
| UEENEEI126A | Provide solutions to pneumatic-hydraulic system operations | !not current |
| UEENEEI127A | Analyse complex electronic circuits controlling fluids | !not current |
| UEENEEI138A | Provide solutions to extra low voltage (ELV) electro-pneumatic control systems and drives | !not current |
| UEENEEI139A | Diagnose and rectify faults in digital controls systems | !not current |
| UEENEEI140A | Plan the electrical installation of integrated systems | !not current |
| UEENEEI141A | Develop electrical integrated systems | !not current |
| UEENEEI142A | Develop an electrical integrated system interface for access through a touch screen | !not current |
| UEENEEI143A | Develop access control of electrical integrated systems using logic-based programming tools | !not current |
| UEENEEI144A | Develop interfaces for multiple access methods to monitor, schedule and control an electrical integrated system | !not current |
| UEENEEI145A | Diagnose and rectify faults in a.c. motor drive systems | !not current |
| UEENEEI146A | Diagnose and rectify faults in d.c. motor drive systems | !not current |
| UEENEEI147A | Diagnose and rectify faults in servo drive systems | !not current |
| UEENEEI148A | Solve problems in single phase electronic power control circuits | !not current |
| UEENEEI149A | Solve problems in polyphase electronic power control circuits | !not current |
| UEENEEI150A | Develop, enter and verify discrete control programs for programmable controllers | !not current |
| UEENEEI151A | Develop, enter and verify word and analogue control programs for programmable logic controllers | !not current |
| UEENEEI152A | Develop, enter and verify programs in Supervisory Control and Data Acquisition systems | !not current |
| UEENEEI153A | Design and configure Human-Machine Interface (HMI) networks | !not current |
| UEENEEI154A | Design and use advanced programming tools PC networks and HMI Interfacing | !not current |
| UEENEEI155A | Develop structured programs to control external devices | !not current |
| UEENEEI156A | Develop and test code for microcontroller devices | !not current |
| UEENEEI157A | Configure and maintain industrial control system networks | !not current |
| UEENEEJ102A | Prepare and connect refrigerant tubing and fittings | !not current |
| UEENEEJ103A | Establish the basic operating conditions of vapour compression systems | !not current |
| UEENEEJ104A | Establish the basic operating conditions of air conditioning systems | !not current |
| UEENEEK125A | Solve basic problems in photovoltaic energy apparatus and systems | !not current |
| UEENEEK135A | Design grid connected photovoltaic power supply systems | !not current |
| UEENEEK142A | Apply environmentally and sustainable procedures in the energy sector | !not current |
| UEENEEK145A | Implement and monitor energy sector environmental and sustainable policies and procedures | !not current |
| UEENEEK148A | Install, configure and commission LV grid connected photovoltaic power systems | !not current |
| UEENEEK151A | Develop effective engineering strategies for energy reduction in buildings | !not current |
| UEENEEK152A | Develop strategies to address sustainability issues for electrical installations | !not current |
| UEENEEK153A | Assess energy loads and uses for energy efficiency in residential, office and retail premises | !not current |
| UEENEEK154A | Assess energy loads and uses for energy efficiency in commercial facilities | !not current |
| UEENEEK155A | Assess energy loads and uses for energy efficiency in industrial properties and enterprises | !not current |
| UEENEEM019A | Attend to breakdowns in hazardous areas - coal mining | !not current |
| UEENEEM020A | Attend to breakdowns in hazardous areas - gas atmospheres | !not current |
| UEENEEM021A | Attend to breakdowns in hazardous areas - dust atmospheres | !not current |
| UEENEEM022A | Attend to breakdowns in hazardous areas - pressurisation | !not current |
| UEENEEM023A | Install explosion-protected equipment and wiring systems - coal mining | !not current |
| UEENEEM024A | Install explosion-protected equipment and wiring systems - gas atmospheres | !not current |
| UEENEEM025A | Install explosion-protected equipment and wiring systems - dust atmospheres | !not current |
| UEENEEM026A | Install explosion-protected equipment and wiring systems - pressurisation | !not current |
| UEENEEM027A | Maintain equipment in hazardous areas - coal mining | !not current |
| UEENEEM028A | Maintain equipment in hazardous areas - gas atmospheres | !not current |
| UEENEEM029A | Maintain equipment in hazardous areas - dust atmospheres | !not current |
| UEENEEM030A | Maintain equipment in hazardous areas - pressurisation | !not current |
| UEENEEM036A | Conduct a conformity assessment of explosion-protected equipment - gas atmospheres | !not current |
| UEENEEM038A | Conduct testing of hazardous areas installations - coal mining | !not current |
| UEENEEM039A | Conduct testing of hazardous areas installations - gas atmospheres | !not current |
| UEENEEM042A | Conduct visual inspection of hazardous areas installations | !not current |
| UEENEEM044A | Conduct detailed inspection of hazardous areas installations - gas atmospheres | !not current |
| UEENEEM047A | Develop and manage maintenance programs for hazardous areas electrical equipment - coal mining | !not current |
| UEENEEM052A | Classify hazardous areas - gas atmospheres | !not current |
| UEENEEM054A | Plan electrical installations for hazardous areas - gas atmospheres | !not current |
| UEENEEM057A | Design explosion-protected electrical systems and installations - gas atmospheres | !not current |
| UEENEEM065A | Conduct audit of hazardous areas installations - gas atmospheres | !not current |
| UEENEEM068A | Assess the fitness-for-purpose of hazardous areas explosion-protected equipment - gas atmospheres | !not current |
| UEENEEM078A | Manage compliance of hazardous areas | !not current |
| UEENEEM080A | Report on the integrity of explosion-protected equipment in a hazardous area | !not current |
| UETTDRIS44A | Perform HV field switching operation to a given schedule | !not current |
| UETTDRIS67A | Solve problems in energy supply network equipment | !not current |
| UETTDRIS68A | Solve problems in energy supply network protection equipment and systems | !not current |
| UETTDRIS69A | Diagnose and rectify faults in energy supply apparatus | !not current |
| UETTDRIS70A | Diagnose and rectify faults in electrical energy distribution systems | !not current |
| UETTDRIS71A | Diagnose and rectify faults in electrical energy supply transmission systems | !not current |
| UETTDRIS72A | Diagnose and rectify faults in distributed generation systems | !not current |
| UETTDRIS73A | Develop engineering solutions for energy supply power transformer problems | !not current |
| UETTDRIS74A | Develop engineering solutions for energy supply system protection problems | !not current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every UEE training product on the register · Search all training products
Is UEE62211 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.