Can an RTO still enrol new students in UEENEEG149A?

For an RTO registered by ASQA, new enrolments are not permitted today, unless ASQA has approved otherwise — for your organisation, for a class of RTOs, or for all RTOs. The one-year point this rule counts from — one year from the date the replacement was included on the National Register — fell earlier, on 5 October 2021. That date is arithmetic, not a day on which this instrument prohibited anything: s 14(1)(a)(i) of the National Vocational Education and Training Regulator (Compliance Standards for NVR Registered Training Organisations and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355) commenced on 1 July 2025 and imposes nothing before then. RTOs registered by VRQA in Victoria or by the TAC in Western Australia are not covered by it.

Is there a deadline for learners already enrolled in UEENEEG149A?

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

UEENEEG149A Provide engineering solutions to problems in complex polyphase…

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

UEENEEG149ASuperseded — equivalentProvide engineering solutions to problems in complex polyphase power circuits
equivalent
UEEEL0062CurrentProvide engineering solutions to problems in complex polyphase power circuits

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

UEENEEG049BUEENEEG149Aequivalent28 July 2011
The register records this supersession but attaches no note on what changed.
UEENEEG149AUEEEL0062equivalent4 October 2020
The register records this supersession but attaches no note on what changed.

Official documents on the register

What training.gov.au lists for UEENEEG149A and for its training package UEE07 (release 4.0), with the name and date the register publishes for each file. We link them; we have not read them, and nothing on this page is taken from their contents.

UEENEEG149A_R3.pdfUEENEEG149A release 3 · product document · published 15 August 2013
UEENEEG149A_R3.docxUEENEEG149A release 3 · product document · published 26 November 2024

Is UEENEEG149A on your scope?

This page is the register's record of one product. What it cannot tell you is whether UEENEEG149A sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

Where UEENEEG149A is used

training.gov.au lists UEENEEG149A inside 22 training products, none of them current. Every one of them is below, with the register's own core or elective flag for UEENEEG149A in that product.

Products no longer current 22 listed

The register still records UEENEEG149A inside these, but it no longer recommends them as current. They are here because a scope history or an old enrolment can still point at them.

Code	Training product	Type	UEENEEG149A is
UEE50411	Diploma of Electrical Engineering	Qualification	elective
UEE53011	Diploma of Electrical Systems Engineering	Qualification	elective
UEE60611	Advanced Diploma of Industrial Electronics and Control Engineering	Qualification	core
UEE60911	Advanced Diploma of Renewable Energy Engineering	Qualification	core
UEE61111	Advanced Diploma of Automated Systems Maintenance Engineering	Qualification	elective
UEE61211	Advanced Diploma of Engineering - Explosion protection	Qualification	core
UEE62011	Advanced Diploma of Engineering Technology - Renewable Energy	Qualification	core
UEE62111	Advanced Diploma of Engineering Technology - Electrical	Qualification	core
UEE62211	Advanced Diploma of Electrical - Engineering	Qualification	core
UEE62311	Advanced Diploma of Electrical Engineering - Coal Mining	Qualification	core

Show the remaining 12 products no longer current

Code	Training product	Type	UEENEEG149A is
UEE63011	Advanced Diploma of Electrical Systems Engineering	Qualification	core
UET50212	Diploma of ESI - Power Systems	Qualification	core
UET50219	Diploma of ESI - Power Systems	Qualification	core
UET50221	Diploma of ESI - Power Systems	Qualification	core
UET50312	Diploma of ESI - Power Systems Operations	Qualification	core
UET50319	Diploma of ESI - Power Systems Operations	Qualification	core
UET50321	Diploma of ESI - Power Systems Operations	Qualification	core
UET60212	Advanced Diploma of ESI - Power Systems	Qualification	core
UET60219	Advanced Diploma of ESI - Power Systems	Qualification	core
UET60221	Advanced Diploma of ESI - Power Systems	Qualification	core
UET60312	Advanced Diploma of ESI - Power Systems Operations	Qualification	core
UET60319	Advanced Diploma of ESI - Power Systems Operations	Qualification	core

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 14 October 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UEE training product on the register · Search all training products

Take this with you — one email with this page's clock as the register states it today. Nothing scheduled after it.

Also alert me when a cutoff in this scope changes. Ticking this keeps alert emails on for this address — they start once your RTO is on the free watch (one minute from the panel link in the email), and every alert has a one-click stop.

No account, no card. Your address gets this one email — no list, no marketing. Cutoff alerts only ever come from a watch you start yourself — the box just records your yes now — and every alert has a one-click stop.

Is UEENEEG149A still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

Also watch that scope — email me when something on it is approaching the date new enrolments stop, or when the register changes what you have to do. Free forever, one click to stop.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.