Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is UEE62311 on your scope?
This page is the register's record of one product. What it cannot tell you is whether UEE62311 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What UEE62311 is made of
training.gov.au lists 93 units for UEE62311: 36 core and 57 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 36 listed
| Code | Unit | In this product |
|---|---|---|
| RIIRAI609D | Establish and maintain electrical installations, reticulation and protection system | ●current |
| RIIRIS601D | Establish and maintain the risk management system | !not current |
| UEENEED104A | Use engineering applications software on personal computers | !not current |
| UEENEEE006B | Apply methods to maintain currency of industry developments | !not current |
| UEENEEE015B | Develop design briefs for electrotechnology projects | !not current |
| UEENEEE071B | Write specifications for electrical engineering projects | !not current |
| UEENEEE080A | Apply industry and community standards to engineering activities | !not current |
| UEENEEE081A | Apply material science to solving electrotechnology engineering problems | !not current |
| UEENEEE082A | Apply physics to solving electrotechnology engineering problems | !not current |
| UEENEEE083A | Establish and follow a competency development plan in an electrotechnology engineering discipline | !not current |
| UEENEEE101A | Apply Occupational Health and Safety regulations, codes and practices in the workplace | !not current |
| UEENEEE102A | Fabricate, assemble and dismantle utilities industry components | !not current |
| UEENEEE104A | Solve problems in d.c. circuits | !not current |
| UEENEEE105A | Fix and secure electrotechnology equipment | !not current |
| UEENEEE107A | Use drawings, diagrams, schedules, standards, codes and specifications | !not current |
| UEENEEE117A | Implement and monitor energy sector OHS policies and procedures | !not current |
| UEENEEE124A | Compile and produce an energy sector detailed report | !not current |
| UEENEEE125A | Provide engineering solutions for problems in complex multiple path circuits | !not current |
| UEENEEE126A | Provide solutions to basic engineering computational problems | !not current |
| UEENEEE137A | Document and apply measures to control OHS risks associated with electrotechnology work | !not current |
| UEENEEG006A | Solve problems in single and three phase low voltage machines | !not current |
| UEENEEG033A | Solve problems in single and three phase low voltage electrical apparatus and circuits | !not current |
| UEENEEG063A | Arrange circuits, control and protection for general electrical installations | !not current |
| UEENEEG101A | Solve problems in electromagnetic devices and related circuits | !not current |
| UEENEEG102A | Solve problems in low voltage a.c. circuits | !not current |
| UEENEEG103A | Install low voltage wiring and accessories | !not current |
| UEENEEG104A | Install appliances, switchgear and associated accessories for low voltage electrical installations | !not current |
| UEENEEG105A | Verify compliance and functionality of low voltage general electrical installations | !not current |
| UEENEEG106A | Terminate cables, cords and accessories for low voltage circuits | !not current |
| UEENEEG107A | Select wiring systems and cables for low voltage general electrical installations | !not current |
Show the remaining 6 core units
| Code | Unit | In this product |
|---|---|---|
| UEENEEG108A | Trouble-shoot and repair faults in low voltage electrical apparatus and circuits | !not current |
| UEENEEG109A | Develop and connect electrical control circuits | !not current |
| UEENEEG149A | Provide engineering solutions to problems in complex polyphase power circuits | !not current |
| UEENEEG169A | Manage large electrical projects | !not current |
| UEENEEG170A | Plan large electrical projects | !not current |
| UEENEEK132A | Develop strategies to address environmental and sustainability issues in the energy sector | !not current |
Elective units 57 listed
| Code | Unit | In this product |
|---|---|---|
| BSBINM501A | Manage an information or knowledge management system | !not current |
| BSBINN502A | Build and sustain an innovative work environment | !not current |
| BSBMGT502B | Manage people performance | !not current |
| BSBMGT516C | Facilitate continuous improvement | !not current |
| BSBWOR502B | Ensure team effectiveness | !not current |
| UEENEEC005B | Estimate electrotechnology projects | !not current |
| UEENEEC006B | Prepare tender submissions for electrotechnology projects | !not current |
| UEENEEC007B | Manage contract variations | !not current |
| UEENEEE110A | Develop and implement energy sector maintenance programs | !not current |
| UEENEEE127A | Use advanced computational processes to provide solutions to energy sector engineering problems | !not current |
| UEENEEG121A | Verify compliance and functionality of special LV electrical installations | !not current |
| UEENEEG122A | Conduct compliance inspection of single phase LV electrical installations | !not current |
| UEENEEG123A | Conduct compliance inspection of LV electrical installations with demand exceeding 100 A per phase | !not current |
| UEENEEG124A | Conduct compliance inspection of special LV electrical installations | !not current |
| UEENEEG125A | Plan electrical installations with a low voltage demand up to 400 A per phase | !not current |
| UEENEEG127A | Design electrical installations with a low voltage demand greater than 400 A per phase | !not current |
| UEENEEG128A | Plan low voltage switchboard and control panel layouts | !not current |
| UEENEEG130A | Design switchboards rated for high fault levels (greater than 400 A) | !not current |
| UEENEEG131A | Evaluate performance of low voltage electrical apparatus | !not current |
| UEENEEG132A | Carry out low voltage electrical field testing and report findings | !not current |
| UEENEEG145A | Develop engineering solutions for induction machine and control problems | !not current |
| UEENEEG157A | Conduct electrical tests on LV electrical machines | !not current |
| UEENEEG158A | Conduct electrical tests on HV electrical machines | !not current |
| UEENEEG159A | Conduct mechanical tests on electrical machines and components | !not current |
| UEENEEG160A | Evaluate performance of LV electrical machines | !not current |
| UEENEEG161A | Design and develop modifications to LV electrical machines | !not current |
| UEENEEG172A | Investigate and report on electrical incidents and causes | !not current |
| UEENEEI124A | Fault find and repair analogue circuits and components in electronic control systems | !not current |
| UEENEEI139A | Diagnose and rectify faults in digital controls systems | !not current |
| UEENEEI145A | Diagnose and rectify faults in a.c. motor drive systems | !not current |
Show the remaining 27 elective units
| Code | Unit | In this product |
|---|---|---|
| UEENEEI146A | Diagnose and rectify faults in d.c. motor drive systems | !not current |
| UEENEEI147A | Diagnose and rectify faults in servo drive systems | !not current |
| UEENEEI150A | Develop, enter and verify discrete control programs for programmable controllers | !not current |
| UEENEEI151A | Develop, enter and verify word and analogue control programs for programmable logic controllers | !not current |
| UEENEEI152A | Develop, enter and verify programs in Supervisory Control and Data Acquisition systems | !not current |
| UEENEEI153A | Design and configure Human-Machine Interface (HMI) networks | !not current |
| UEENEEI154A | Design and use advanced programming tools PC networks and HMI Interfacing | !not current |
| UEENEEI155A | Develop structured programs to control external devices | !not current |
| UEENEEI157A | Configure and maintain industrial control system networks | !not current |
| UEENEEM019A | Attend to breakdowns in hazardous areas - coal mining | !not current |
| UEENEEM023A | Install explosion-protected equipment and wiring systems - coal mining | !not current |
| UEENEEM027A | Maintain equipment in hazardous areas - coal mining | !not current |
| UEENEEM031A | Overhaul and repair of explosion-protected equipment - coal mining | !not current |
| UEENEEM035A | Conduct a conformity assessment of explosion-protected equipment - coal mining | !not current |
| UEENEEM036A | Conduct a conformity assessment of explosion-protected equipment - gas atmospheres | !not current |
| UEENEEM038A | Conduct testing of hazardous areas installations - coal mining | !not current |
| UEENEEM042A | Conduct visual inspection of hazardous areas installations | !not current |
| UEENEEM043A | Conduct detailed inspection of hazardous areas installations - coal mining | !not current |
| UEENEEM047A | Develop and manage maintenance programs for hazardous areas electrical equipment - coal mining | !not current |
| UEENEEM064A | Conduct audit of hazardous areas installations - coal mining | !not current |
| UEENEEM067A | Assess the fitness-for-purpose of hazardous areas explosion-protected equipment - coal mining | !not current |
| UEENEEM074A | Plan electrical installations in hazardous areas - Coal mining | !not current |
| UEENEEM078A | Manage compliance of hazardous areas | !not current |
| UEENEEM080A | Report on the integrity of explosion-protected equipment in a hazardous area | !not current |
| UETTDRIS67A | Solve problems in energy supply network equipment | !not current |
| UETTDRIS68A | Solve problems in energy supply network protection equipment and systems | !not current |
| UETTDRIS73A | Develop engineering solutions for energy supply power transformer problems | !not current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every UEE training product on the register · Search all training products
Is UEE62311 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.