Where the register points next
training.gov.au points at nothing after UEE62325: it is the current product, and no replacement is listed.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is UEE62325 on your scope?
This page is the register's record of one product. What it cannot tell you is whether UEE62325 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What UEE62325 is made of
training.gov.au lists 71 units for UEE62325: 18 core and 53 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 18 listed
| Code | Unit | In this product |
|---|---|---|
| RIIRAI609D | Establish and maintain electrical installations, reticulation and protection system | ●current |
| RIIRIS601E | Establish and maintain risk management systems | ●current |
| UEECD0003 | Apply industry and community standards to engineering activities | ●current |
| UEECD0004 | Apply material science to solving electrotechnology engineering problems | ●current |
| UEECD0005 | Apply physics to solving electrotechnology engineering problems | ●current |
| UEECD0010 | Compile and produce an energy sector detailed report | ●current |
| UEECD0014 | Develop design briefs for electrotechnology projects | ●current |
| UEECD0017 | Establish and follow a competency development plan in an electrotechnology engineering discipline | ●current |
| UEECD0024 | Implement and monitor energy sector WHS policies and procedures | ●current |
| UEECD0036 | Provide engineering solutions for problems in complex multiple path circuits | ●current |
| UEECD0039 | Provide solutions to basic engineering computational problems | ●current |
| UEECD0056 | Apply methods to maintain currency of industry developments | ●current |
| UEECD0059 | Write specifications for electrical engineering projects | ●current |
| UEECS0033 | Use engineering applications software on personal computers | ●current |
| UEEEL0015 | Manage large electrical projects | ●current |
| UEEEL0058 | Plan large electrical projects | ●current |
| UEEEL0062 | Provide engineering solutions to problems in complex polyphase power circuits | ●current |
| UEERE0013 | Develop strategies to address environmental and sustainability issues in the energy sector | ●current |
Elective units 53 listed
| Code | Unit | In this product |
|---|---|---|
| BSBINS501 | Implement information and knowledge management systems | ●current |
| BSBLDR522 | Manage people performance | ●current |
| BSBSTR501 | Establish innovative work environments | ●current |
| BSBSTR502 | Facilitate continuous improvement | ●current |
| BSBTWK502 | Manage team effectiveness | ●current |
| UEECD0013 | Develop and implement energy sector maintenance programs | ●current |
| UEECD0049 | Use advanced computational processes to provide solutions to energy sector engineering problems | ●current |
| UEECO0001 | Estimate electrotechnology projects | ●current |
| UEECO0003 | Manage contract variations | ●current |
| UEECO0014 | Prepare tender submissions for electrotechnology projects | ●current |
| UEEEL0011 | Evaluate performance of low voltage electrical apparatus | ●current |
| UEEEL0027 | Carry out low voltage electrical field testing and report findings | ●current |
| UEEEL0029 | Conduct compliance inspection of LV electrical installations with demand exceeding 100 A per phase | ●current |
| UEEEL0030 | Conduct compliance inspection of single phase LV electrical installations | ●current |
| UEEEL0031 | Conduct compliance inspection of special LV electrical installations | ●current |
| UEEEL0032 | Conduct electrical tests on HV electrical machines | ●current |
| UEEEL0033 | Conduct electrical tests on LV electrical machines | ●current |
| UEEEL0034 | Conduct mechanical tests on electrical machines and components | ●current |
| UEEEL0037 | Design electrical installations with a low voltage demand greater than 400 A per phase | ●current |
| UEEEL0038 | Design switchboards rated for high fault levels (greater than 400 A) | ●current |
| UEEEL0043 | Develop engineering solutions for induction machine and control problems | ●current |
| UEEEL0051 | Investigate and report on electrical incidents and causes | ●current |
| UEEEL0057 | Plan electrical installations with a low voltage demand up to 400 A per phase | ●current |
| UEEEL0059 | Plan low voltage switchboard and control panel layouts | ●current |
| UEEEL0073 | Verify compliance and functionality of special LV electrical installations | ●current |
| UEEHA0004 | Enter a classified hazardous area to undertake work related to electrical equipment | ●current |
| UEEHA0020 | Conduct detailed inspection of electrical installations for hazardous areas | ●current |
| UEEHA0022 | Determine the explosion-protection requirements to meet a specified classified hazardous area | ●current |
| UEEHA0023 | Develop and manage periodic electrical inspection and maintenance programs for hazardous areas | ●current |
| UEEHA0025 | Install explosion-protected equipment and associated apparatus and wiring systems | ●current |
Show the remaining 23 elective units
| Code | Unit | In this product |
|---|---|---|
| UEEHA0026 | Maintain equipment associated with hazardous areas | ●current |
| UEEHA0029 | Plan electrical installations for hazardous areas | ●current |
| UEEHA0031 | Supervise repair and overhaul of explosion-protected equipment type flameproof (Ex d) | ●current |
| UEEHA0032 | Supervise repair and overhaul of explosion-protected equipment type increased safety (Ex e) | ●current |
| UEEHA0033 | Supervise repair and overhaul of explosion-protected equipment type intrinsically safe (Ex i) | ●current |
| UEEHA0034 | Supervise repair and overhaul of explosion-protected equipment type pressurised (Ex p) | ●current |
| UEEHA0035 | Supervise repair and overhaul of explosion-protected rotating machines | ●current |
| UEEHA0038 | Conduct visual and close inspection of electrical installations for hazardous areas | ●current |
| UEEHA0039 | Supervise repair and overhaul of explosion-protected equipment type Group III ('t') | ●current |
| UEEIC0005 | Configure and maintain industrial control system networks | ●current |
| UEEIC0006 | Design and configure Human-Machine Interface (HMI) networks | ●current |
| UEEIC0007 | Design and use advanced programming tools, PC networks and HMI Interfacing | ●current |
| UEEIC0012 | Develop structured programs to control external devices | ●current |
| UEEIC0013 | Develop, enter and verify discrete control programs for programmable controllers | ●current |
| UEEIC0014 | Develop, enter and verify programs in supervisory control and data acquisition systems | ●current |
| UEEIC0015 | Develop, enter and verify word and analogue control programs for programmable logic controllers | ●current |
| UEEIC0016 | Diagnose and rectify faults in a.c. motor drive systems | ●current |
| UEEIC0017 | Diagnose and rectify faults in d.c. motor drive systems | ●current |
| UEEIC0018 | Diagnose and rectify faults in digital controls systems | ●current |
| UEEIC0019 | Diagnose and rectify faults in servo drive systems | ●current |
| UEEIC0020 | Fault find and repair analogue circuits and components in electronic control systems | ●current |
| UETDRIS032 | Solve problems in network equipment | ●current |
| UETDRIS033 | Solve problems in network protection | ●current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every UEE training product on the register · Search all training products
Deliver this? We read the register nightly — get the free breakdown of your whole scope, and hear the day UEE62325 or anything else on it is superseded.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.