UET50212 Diploma of ESI - Power Systems

Supersededtraining.gov.au: supersededEquivalent

The currency period for UET50212 ended on 23 September 2019 — 6 years ago. It names one replacement below, with the equivalence it declares for each.

Transition clockClosed to new enrolments

New enrolments are not permitted from 25 September 2020 — one year from the date the replacement was included on the National Register (s 14(1)(a)(i) of the National VET Regulator (Compliance Standards for NVR RTOs and Fit and Proper Person Requirements) Instrument 2025 (F2025L00355, in force 1 July 2025)), or from a later date if ASQA has approved otherwise for your organisation.

Learners already enrolled have no fixed deadline: they complete the product and are issued their AQF certification, or transfer to the replacement, in a timely manner (ASQA guidance, read live 25 August 2026).

The same date closes a second obligation: under s 7(2)(c) of the same instrument, advertising may refer to a superseded product only while it is on scope and new enrolments are permitted. When enrolments stop, the course page advertising it stops being permitted too — and if ASQA approves a later enrolment date, that moves with it.

Sector-wide: the item 14 cut-off, measured across every live scope · the repealed 12-month rule

Product type
Qualification
Training package
UET12 — Transmission, Distribution and Rail Sector Training Package
Currency period ends
23 September 2019
Latest release
Release 3 · 5 November 2014 · 3 releases in all
Supersedes
UET50109
Superseded by
UET50219 equivalent

Where the register points next

Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.

  1. UET50212Superseded — equivalentDiploma of ESI - Power Systems
  2. equivalent
  3. UET50219Superseded — equivalentDiploma of ESI - Power Systems
  4. equivalent
  5. UET50221Deleted from the registerDiploma of ESI - Power Systems

The register does not list a current endpoint for this chain: UET50221 is the last product it points at, and UET50221 is not marked current either.

What the register says changed

These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.

  • UET50109UET50212equivalent30 April 2012

    The register records this supersession but attaches no note on what changed.

  • UET50212UET50219equivalent24 September 2019

    The register records this supersession but attaches no note on what changed.

Is UET50212 on your scope?

This page is the register's record of one product. What it cannot tell you is whether UET50212 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.

Public code, nothing else. We read your live scope from training.gov.au and answer here — nothing is stored unless you ask us to watch it.

Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.

What UET50212 is made of

training.gov.au lists 85 units for UET50212: 15 core and 70 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.

Core units 15 listed

CodeUnitIn this product
UEENEED104AUse engineering applications software on personal computersnot current
UEENEEE101AApply Occupational Health and Safety regulations, codes and practices in the workplacenot current
UEENEEE102AFabricate, assemble and dismantle utilities industry componentsnot current
UEENEEE104ASolve problems in d.c. circuitsnot current
UEENEEE107AUse drawings, diagrams, schedules, standards, codes and specificationsnot current
UEENEEE124ACompile and produce an energy sector detailed reportnot current
UEENEEE125AProvide engineering solutions for problems in complex multiple path circuitsnot current
UEENEEE126AProvide solutions to basic engineering computational problemsnot current
UEENEEG101ASolve problems in electromagnetic devices and related circuitsnot current
UEENEEG102ASolve problems in low voltage a.c. circuitsnot current
UEENEEG149AProvide engineering solutions to problems in complex polyphase power circuitsnot current
UETTDREL11AApply sustainable energy and environmental proceduresnot current
UETTDREL16AWorking safely near live electrical apparatusnot current
UETTDRIS62AImplement and monitor the power system organisational OHS policies, procedures and programsnot current
UETTDRIS63AImplement and monitor the power system environmental and sustainable energy management policies and proceduresnot current

Elective units 70 listed

CodeUnitIn this product
BSBCUS501CManage quality customer servicenot current
BSBFIM501AManage budgets and financial plansnot current
BSBINM501AManage an information or knowledge management systemnot current
BSBINN502ABuild and sustain an innovative work environmentnot current
BSBLED501ADevelop a workplace learning environmentnot current
BSBMGT502BManage people performancenot current
BSBMGT515AManage operational plannot current
BSBMGT516CFacilitate continuous improvementnot current
BSBSUS501ADevelop workplace policy and procedures for sustainabilitynot current
BSBWOR501BManage personal work priorities and professional developmentnot current
BSBWOR502BEnsure team effectivenessnot current
UEENEEC005BEstimate electrotechnology projectsnot current
UEENEEC006BPrepare tender submissions for electrotechnology projectsnot current
UEENEEE190APrepare engineering drawings using manual drafting and CAD for electrotechnology/utilities applicationsnot current
UEENEEE191APrepare electrotechnology/utilities drawings using manual drafting and CAD equipment and softwarenot current
UEENEEE192AProduce detailed electrotechnology /utilities drawings using computer aided design equipment and softwarenot current
UEENEEG006ASolve problems in single and three phase low voltage machinesnot current
UEENEEH102ARepairs basic electronic apparatus faults by replacement of componentsnot current
UEENEEH112ATroubleshoot digital sub-systemsnot current
UEENEEH139ATroubleshoot basic amplifier circuitsnot current
UEENEEI155ADevelop structured programs to control external devicesnot current
UEENEER001BContribute to the planning of a research projectnot current
UEENEER002BContribute to the conduct of a research projectnot current
UEENEER003BContribute to the development of a product/application/ servicenot current
UEENEER004BContribute to the trial of a product/application/ servicenot current
UEPOPS507BConduct project managementnot current
UEPOPS520AEvaluate cost estimations and initiate appropriate solutionsnot current
UETTDRDS31ADraft and layout a power system overhead distribution extensionnot current
UETTDRDS32ADraft and layout a power system underground distribution extensionnot current
UETTDRDS33ADraft and layout a power system street lighting systemnot current
Show the remaining 40 elective units
CodeUnitIn this product
UETTDRDS34ADraft and layout a power system distribution substation minor upgradenot current
UETTDRDS35ADesign overhead distribution power systemsnot current
UETTDRDS36ADesign underground distribution power systemsnot current
UETTDRDS37ADesign power system distribution substationsnot current
UETTDRDS38ADesign power system public lighting systemsnot current
UETTDRDS39APrepare and manage detailed construction plans for electrical power system infrastructurenot current
UETTDRDS42AInvestigate quality of power systems supply issuesnot current
UETTDRDS43ADevelop high voltage and low voltage distribution protection systemsnot current
UETTDRDS44ADesign power system substations modificationsnot current
UETTDRDS45AOrganise and implement ESI line and easement surveysnot current
UETTDRDS46ADevelop planned power systems outage strategiesnot current
UETTDRDS49AEstablish and manage power system geographical information systems datanot current
UETTDREL15ARespond to power systems technical enquiries and requestsnot current
UETTDRIS66AManage an electricity power system OHS management systemnot current
UETTDRIS67ASolve problems in energy supply network equipmentnot current
UETTDRIS68ASolve problems in energy supply network protection equipment and systemsnot current
UETTDRIS69ADiagnose and rectify faults in energy supply apparatusnot current
UETTDRIS71ADiagnose and rectify faults in electrical energy supply transmission systemsnot current
UETTDRIS72ADiagnose and rectify faults in distributed generation systemsnot current
UETTDRSO36ADevelop low voltage distribution switching programsnot current
UETTDRSO37ADevelop high voltage distribution and subtransmission switching programsnot current
UETTDRSO38ADevelop and evaluate power systems transmission switching programsnot current
UETTDRSO39ACoordinate low voltage distribution networksnot current
UETTDRSO40ACoordinate high voltage distribution and subtransmission networksnot current
UETTDRSO43ACoordinate low voltage distribution network demandnot current
UETTDRSO45AOperate and monitor system SCADA equipmentnot current
UETTDRSO46AMonitor and control the field staff activitiesnot current
UETTDRSO47ACoordinate high voltage transmission networknot current
UETTDRSO48ARespond to discrete and interdependent protection operationsnot current
UETTDRSO49ACoordinate power system operations in a regulated energy marketnot current
UETTDRTS21AMaintain interdependent network protection and control systemsnot current
UETTDRTS22ACommission interdependent network protection and control systemsnot current
UETTDRTS25AMaintain and test and metering schemesnot current
UETTDRTS26ACommission power systems metering schemesnot current
UETTDRTS27APerform accuracy checks on power systems instrument transformersnot current
UETTDRTS28ARepair, test and calibrate protection relays and metersnot current
UETTDRTS29ADevelop power systems secondary isolation instructional documentsnot current
UETTDRTS31AMaintain, test and commission power systems voltage regulating equipmentnot current
UETTDRTS34AInstall and maintain power system communication equipmentnot current
UETTDRTS35AMaintain complex network protection and control systemsnot current

Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.

Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.

Every UET training product on the register · Search all training products

Is UET50212 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.

No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.