Where the register points next
Each step below is one supersession training.gov.au publishes between two products. The label on the rail is the equivalence the register declares for that step — not our reading of it.
What the register says changed
These are the mapping notes training.gov.au attaches to each supersession, quoted as the register writes them. They are the only public record of what actually changed between two versions.
Is UEE41011 on your scope?
This page is the register's record of one product. What it cannot tell you is whether UEE41011 sits on your own scope today, or what else on that scope has moved without anyone noticing. Enter your RTO number and we read every product on your live scope against training.gov.au and tell you which ones are superseded and which replacements the register flags not equivalent.
Whether a supersession requires anything of you, and what, sits with you and your regulator. This page maps what the register records; it does not make that judgement. If the difference between an equivalent and a non-equivalent replacement is the question, we wrote it up in equivalent vs not equivalent.
What UEE41011 is made of
training.gov.au lists 73 units for UEE41011: 23 core and 50 elective. The register does not publish a completion rule in units for this product, so we do not state one. How many of the electives are required is in the packaging rules on training.gov.au.
Core units 23 listed
| Code | Unit | In this product |
|---|---|---|
| UEENEEE038B | Participate in development and follow a personal competency development plan | !not current |
| UEENEEE101A | Apply Occupational Health and Safety regulations, codes and practices in the workplace | !not current |
| UEENEEE102A | Fabricate, assemble and dismantle utilities industry components | !not current |
| UEENEEE104A | Solve problems in d.c. circuits | !not current |
| UEENEEE105A | Fix and secure electrotechnology equipment | !not current |
| UEENEEE107A | Use drawings, diagrams, schedules, standards, codes and specifications | !not current |
| UEENEEE117A | Implement and monitor energy sector OHS policies and procedures | !not current |
| UEENEEE124A | Compile and produce an energy sector detailed report | !not current |
| UEENEEE137A | Document and apply measures to control OHS risks associated with electrotechnology work | !not current |
| UEENEEG006A | Solve problems in single and three phase low voltage machines | !not current |
| UEENEEG033A | Solve problems in single and three phase low voltage electrical apparatus and circuits | !not current |
| UEENEEG063A | Arrange circuits, control and protection for general electrical installations | !not current |
| UEENEEG101A | Solve problems in electromagnetic devices and related circuits | !not current |
| UEENEEG102A | Solve problems in low voltage a.c. circuits | !not current |
| UEENEEG103A | Install low voltage wiring and accessories | !not current |
| UEENEEG104A | Install appliances, switchgear and associated accessories for low voltage electrical installations | !not current |
| UEENEEG105A | Verify compliance and functionality of low voltage general electrical installations | !not current |
| UEENEEG106A | Terminate cables, cords and accessories for low voltage circuits | !not current |
| UEENEEG107A | Select wiring systems and cables for low voltage general electrical installations | !not current |
| UEENEEG108A | Trouble-shoot and repair faults in low voltage electrical apparatus and circuits | !not current |
| UEENEEG109A | Develop and connect electrical control circuits | !not current |
| UEENEEK145A | Implement and monitor energy sector environmental and sustainable policies and procedures | !not current |
| UEENEEK152A | Develop strategies to address sustainability issues for electrical installations | !not current |
Elective units 50 listed
| Code | Unit | In this product |
|---|---|---|
| CPCCOHS1001A | Work safely in the construction industry | !not current |
| HLTAID001 | Provide cardiopulmonary resuscitation | !not current |
| HLTAID009 | Provide cardiopulmonary resuscitation | ●current |
| UEENEEC001B | Maintain documentation | !not current |
| UEENEEC002B | Source and purchase material/parts for installation or service jobs | !not current |
| UEENEEC003B | Provide quotations for installation or service jobs | !not current |
| UEENEEC010B | Deliver a service to customers | !not current |
| UEENEED101A | Use computer applications relevant to a workplace | !not current |
| UEENEED104A | Use engineering applications software on personal computers | !not current |
| UEENEEE009B | Comply with scheduled and preventative maintenance program processes | !not current |
| UEENEEE020B | Provide basic instruction in the use of electrotechnology apparatus | !not current |
| UEENEEE073B | Write specifications for refrigeration and air conditioning engineering projects | !not current |
| UEENEEE121A | Plan an integrated cabling installation system | !not current |
| UEENEEF102A | Install and maintain cabling for multiple access to telecommunication services | !not current |
| UEENEEF104A | Install and modify performance data communication copper cabling | !not current |
| UEENEEG076A | Install and replace low voltage current transformer metering | !not current |
| UEENEEG113A | Install and maintain emergency safety systems | !not current |
| UEENEEG121A | Verify compliance and functionality of special LV electrical installations | !not current |
| UEENEEG122A | Conduct compliance inspection of single phase LV electrical installations | !not current |
| UEENEEG123A | Conduct compliance inspection of LV electrical installations with demand exceeding 100 A per phase | !not current |
| UEENEEG124A | Conduct compliance inspection of special LV electrical installations | !not current |
| UEENEEG125A | Plan electrical installations with a low voltage demand up to 400 A per phase | !not current |
| UEENEEG128A | Plan low voltage switchboard and control panel layouts | !not current |
| UEENEEG162A | Set up and place LV electrical apparatus and associated circuits into service | !not current |
| UEENEEG168A | Diagnose and rectify faults in complex lift systems | !not current |
| UEENEEG171A | Install, set up and commission interval metering | !not current |
| UEENEEG172A | Investigate and report on electrical incidents and causes | !not current |
| UEENEEG175A | Develop compliance policies and plans to conduct a electrical contracting business | !not current |
| UEENEEG177A | Select low voltage power factor correction equipment | !not current |
| UEENEEG179A | Develop detailed electrical drawings | !not current |
Show the remaining 20 elective units
| Code | Unit | In this product |
|---|---|---|
| UEENEEG181A | Provide advice on effective and energy efficient lighting products | !not current |
| UEENEEG182A | Supply effective and efficient lighting products for domestic and small commercial applications | !not current |
| UEENEEG183A | Provide advice on the application of energy efficient lighting for ambient and aesthetic effect | !not current |
| UEENEEG184A | Provide photometric data for illumination system design | !not current |
| UEENEEG185A | Select effective and efficient light sources and luminaries for given locations and designs | !not current |
| UEENEEG186A | Design effective and efficient lighting for residential and commercial buildings | !not current |
| UEENEEG188A | Prepare quotations for the supply of effective and efficient lighting products for lighting projects | !not current |
| UEENEEG189A | Install and maintain emergency lighting systems | !not current |
| UEENEEH102A | Repairs basic electronic apparatus faults by replacement of components | !not current |
| UEENEEH111A | Troubleshoot single phase input d.c. power supplies | !not current |
| UEENEEI102A | Solve problems in pressure measurement components and systems | !not current |
| UEENEEI103A | Solve problems in density/level measurement components and systems | !not current |
| UEENEEI104A | Solve problems in flow measurement components and systems | !not current |
| UEENEEI105A | Solve problems in temperature measurement components and systems | !not current |
| UEENEEI116A | Assemble, enter and verify operating instructions in microprocessor equipped devices | !not current |
| UEENEEI141A | Develop electrical integrated systems | !not current |
| UEENEEI150A | Develop, enter and verify discrete control programs for programmable controllers | !not current |
| UEENEEK153A | Assess energy loads and uses for energy efficiency in residential, office and retail premises | !not current |
| UEENEEK154A | Assess energy loads and uses for energy efficiency in commercial facilities | !not current |
| UEENEEK155A | Assess energy loads and uses for energy efficiency in industrial properties and enterprises | !not current |
Core and elective are the register's own flags on the unit grid of the release read here. "Not current" means training.gov.au no longer recommends that unit for use inside this product — it does not say anything about the product itself.
Source: this product on training.gov.au, Australia's national training register — or go straight to the units it requires. The rule itself is item 14 of F2025L00355, and ASQA publishes the extensions it has granted. Read on 28 August 2026 UTC. Every code, title, date, status and equivalence flag on this page is the register's; nothing here is estimated or inferred, and where the register publishes nothing we say so.
Every UEE training product on the register · Search all training products
Is UEE41011 still on your scope? Type your RTO code and get the free breakdown — every superseded product on your live scope, and whether the register flags each replacement equivalent.
No account, no card. We never ask for anything about your learners. Your address gets this one report — no list, no marketing — and the scope watch only if you tick the box, with one click to stop it.